
USING THE APPLIANCE
1. Remove the Protective Cap and
slide the Power Switch to “ON” to
turn the appliance on (picture 5).
2. Place the blade on the skin at a
90° angle and slowly move it
against the direction of hair
growth.
3. Move the Blade Head upwards
from the ankle to the thigh
(picture 6), and from the inside
out of the arm.
4. The underarm and bikini area hair
grows in dierent directions, shave
in dierent directions for a flawless
result (picture 7). Stretch the skin
with your fingers and slowly move
the Blade Head from the inside
out against the direction of
hair growth.
(Picture 5)
(Picture 6)
(Picture 7)
CLEANING & MAINTENANCE
1. Make sure the appliance is turned o before you
start cleaning it.
2. Do not immerse the appliance in water. The
disassembling parts can be cleaned separately.
3. Clean the surface of the appliance with a dry cloth
or with a cloth slightly moistened with water.
4. Never use lubricants, detergents, polishing agents,
or air fresheners on this appliance.
5. The removable head should be cleaned with a brush
and then rinsed with water.
6. Never use towels, paper towels, and wire ball sponge
to clean the shaver head.
5. After shaving the skin may become dry, it is
recommended to apply moisturizing cream.
6. After each use, slide the Power Switch to “OFF”
to turn the appliance o.