LOWE'S OAJS-2001 User manual

Instruction manual
Before using the product, please read this instruction manual
carefully and keep it for future reference.
Note: There may be small differences between the images shown
here and the product itself.
JUMP STARTER
OAJS-2001

1. This product was designed for 12V lead acid/AGM/Gel
batteries/vehicles only.
2. DO NOT connect the red and black clamps together.
It will short circuit the jump starter
3. Do not disassemble the jump starter
4. Keep away from children. It is not a child’s toy
5. Store in a dry place. Do not store in damp conditions and keep away
from corrosive materials.
6. If the jump starter expands, leaks, or smells during use, stop and shut
down immediately
7. Please use the jump starter in a normal environment. Do not use in
freezing or burning temperatures.
8. DO NOT jump start the car engine more than 3 times continuously as it
may overheat and damage the product. Please wait 60 seconds between
each jump to prevent overheating.
9. DO NOT jump start if the battery is 10% or lower.
It will damage the battery.
10. Recharge the jump starter every 3 months to prevent the
battery from being damaged
11. Before the first use, charge to 100%
12. After starting the car, please wait at least 30 minutes
before charging the jump starter
13. Be sure to use the standard jumper cables that come with the product.

1. LED Light
2. Power Button
3. Engine "START" Button
4. LED Light Button
5. Engine Force Start Button
6. Screen Display
7. Jump Start Port
8. USB1 Output
9. USB2 Output
10. Type-C Input/ Output Port (IN/ OUT)
11. DC 12V/10A Output
Battery Capacity: 74.0Wh
Peak Current: 2000A
Dimensions: 227*101*59 mm
Type-C Input: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A
Output USB-C: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A
Output USB1: 5V/3A; 9V/2A; 12V/1.5A
Output USB2: 5V/2.4A
Output DC: 12V/10A Max

READY
DC PD US B 1 US B 2
DC
PD
PD
USB 1 USB 2
IN
OUT
%
2. When a DC cable is connected
and charging, this will be displayed
3. When a USB-C cable is connected
and charging, this is displayed.
4. When charging the jump starter,
with a USB-C, this is displayed.
5. When jump starter is on,
this will be displayed
1. When a USB is connected and
charging, this will be displayed

Jumper Cable ×1
Jump Starter x 1
Type-C Cable
(IN/OUT) ×1
User Manual x 1
Packaging
USB A + USB C
USB Cable (OUT) ×1

Plug in any compatible
USB to USB1, USB2,
or Type-C
Plug in the phone or
other device
Press the power button
to start charging
Press the Button
USB 1
USB 2
Type-C (In/Out)
Type-C
(In/Out)
3s

Insert the jumper cables
into the jump starter and
connect the clamps to
the car battery. (Red to
positive/ Black to
negative)
80
FORCE START
PRESS 3 SECONDS
The screen will blink
a green “READY”
If your car battery is in low voltage (below 2V), press and hold the
button for 3 seconds (screen will display “READY” in green) to force
start your car.
Do NOT short circuit, it will be dangerous!
Press the power button, then
press START button
21
Once solid green,
start the car engine
4
READY
3

Press and hold
the "Engine
Force Start"
button for
3 seconds,
the green
"READY"
will be solid
If the above
operations
cannot start
your car, please
use the force
start function
Ensure the correct
connection of
clamps before using
force start function,
hold down the force
start button for 3
seconds until the
"READY" solid
green
"READY" is
solid red and
beeping
Wrong connection
between jump cable
and car's positive
and negative poles.
Connect the Red +
clamp to the + car
battery
Connect the Black -
clamp the to - car
battery
"READY" icon
green and red
flashing
Jumper cables are
connected to jump
starter
Ready to jump start
your car
"READY"
solid green
Jumper clamps are
connected to the
car battery
Disconnect jumper
cables (not in use)
- or -
Connect clamps
to car battery

Please
charge the
jump starter
a solid red "READY"
and beeping ;
The voltage will
automatically cut out
Automatically cut off
output after 45 seconds
and it has not started
while the solid red
"READY" is visible
Turn it back on &
follow the
instructions
When the jump starter
is outputting lower than
13.0V, there will be no
output. The solid red
"READY" will appear
and the device will
start beeping
The "READY" icon is
red and flashing green,
there will be no output

High temperature
protection, stop working
at this time
Automatically
recover when
the temperature
drops
"H8" displays on
the screen
Low temperature
protection, stop working
at this time
Automatically
recover when
the temperature
increases
"H0" displays
on the screen
unit to rechearge
it.
The charge is low and
needs recharging
6. Make sure to connect the jumper cables to the correct terminals. DO NOT start the
car with the incorrect clamps to the opposite terminals.

What is the lifespan of Jump Starter?
How long can Jump Starter hold a charge?
Composition and amount of toxic and harmful substance in jump starter
TOXIC AND HARMFUL SUBSTANCES:
0:Indicate all homogeneous materials’s hazardous substances content
are below the MCV limit specified in the standard 2011/65/EU (RoHS)
with amendment (EU)2015/863.
DBP BBP DEHP DIBPP DEB
A: The decive will automatically shut down after 30 seconds of idle
use. (no charge happening)
500 cycles or full charges.(It can still be used after 500 cycles,
but the capacity remains at about 80%.)

1. We o f fer a lim i t ed war ra n ty for t h i s pr o d uc t a gai n s t any de f e c ts i n
ma ter i al a nd wor k ma n s hip for a perio d o f 12 months since the date of
the factory.The conditions of the warranty are as follows.
2.The war ranty i s o n l y valid upon pres e n ta ti o n o f t he original re c e i p t
(from dealer/retailer) by the original purchaser with the product to be
repaired or replaced.
3.The warranty is invalid if the serial number, date of purchase and label
has been removed.
4.The warranty does not cover damage or product failure resulting from
normalwear and tear, physical abuse, imp roper installa tion, modification
or repairs by unauthorized third parties.
5. We do not assume responsibility for any loss or damage incurred during
shipment or as a result of a force majeure.
6. We a re not liable for any incidental or consequential damages arising
from t he use or misuse of the product.
7. A l l war ranty claims are limi t e d t o r epair or replacement of defective
product and at the sole discretion of us.
8. If we repair or replace the product, the product will be covered for the
remainin g t i m e of the ori g i n a l war ranty period. Repair or replacemen t
may involve the use of reconditioned units which are equivalent in funcion.
Replaced part or product becomes the property of us.
9. Consumable components such as batteries and accessories are not
covered by the warranty.
WARRANTY INFORMATION: