LSTN sound co Gramercy User manual

It’s easy to get started with your
Gramercy. To begin, press and hold the
power button for around 10 seconds.
This will begin the pairing process,
and a red and blue LED on the back
of your speaker will begin to flash.
Select “LSTN Gramercy” from your
device’s Bluetooth settings. You’ll
hear a confirmation, and then you’re
ready to begin enjoying your speaker.
Happy listening!
GETTING STARTED

Click & hold the power button for ~10 seconds to
automatically force your Gramercy to begin pairing.
OPERATION
Answer / Hangup
Raise volume / Skip track
Reduce volume / Previous track
Power On / Off
Play / Pause (Hold to disconnect)

To use the auxiliary port, simply plug in a 3.5mm
audio cable. The Gramercy will change modes
automatically. When using an auxiliary cable with
the Gramercy, the built-in microphone is disabled.
USB charge port (DV 5V) AUX in port
LED indicator
TF card slot
AUXILIARY MODE

If you’re having trouble connecting: Turning
your device’s Bluetooth off and then back on
helps. You can also turn off the Gramercy, and
then hold the power on button for 10s (keep
holding after you hear it say “Power On”). Then
re-pair from your device’s Bluetooth settings.
If your connection is spotty or keeps dropping:
Bluetooth works best with a direct line-of-
sight. Try repositioning your device in relation
to your speaker to improve the connection.
If your Gramercy won’t charge: Your cable may
not be working right. Try a new USB cable, and
turn the case off, then on again. Still nothing?
Let us know by writing [e-mail].
TROUBLESHOOTING

SPECIFICATIONS
Built-in Microphone
Bluetooth v4.2
Range: 10 meters
Battery: 2000 mAh Li-ion
Battery Life: Up to 12 hours @ 50% volume
Charge to full: 3.5 hours
Frequency Range: 20 Hz - 20 kHz
Sensitivity: 82 ± 3 dB
Impedance: 4Ω
Size: Apx. 7” x 7” x 1”
▸
▸
▸
▸
▸
▸
▸
▸
▸
▸

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
▸ Reorient or relocate the receiving antenna.
▸ Increase the separation between the equipment and receiver.
▸ Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected
▸ Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT

LSTN co-founders Bridget & Joe help a patient in Eldoret, Kenya 2018

Sound & purpose: it’s what we’re all
about at LSTN. That’s why proceeds from
every LSTN sale help us give hearing
aids to those in need worldwide. So
far we’ve helped 30,000 people along-
side Starkey Hearing Foundation, and
we’re just getting started. See where
we’re heading next at lstnsound.com

THE LINEUP
Looking for amazing sound? Look no further:
the LSTN lineup is sure to cover all your needs.
Each product is fully electro-acoustically tested
to ensure optimum sound quality, and all our
products come with a one-year warranty. Wheth-
er you need in-ear headphones for working out
or speakers to power your parties, we have you
covered. Amazing sound, incredible purpose.

Now that you own the coolest speaker
on the planet, why not show it off? Post
a photo and tag #LSTN for a chance
to be featured on our official account!
Our followers are also the first to know
about special offers and promotions.
LSTNheadphones LSTNsound LSTN

www.LSTNSOUND.c o m
©2018 LSTN, INC.