LUMA RX IPL6800USA User manual

USE AND CARE GUIDE ·IPL6800USA
FULLBODY HAIR REMOVAL SYSTEM
REGISTER YOUR NEW PRODUCT TODAY!
By registering your new LumaRx™ product, you will receive these important benefits:
Proof of Ownership •Product Protection •Product Registration •Special Offers
Register online at: www.Luma-Rx.com

CONTENTS
PAGE
4 Introducing the LumaRx™Full-Body Hair Removal System
5 How does the LumaRx™Full-Body Hair Removal System work?
7 Getting to know your LumaRx™Full-Body Hair Removal System
8 IMPORTANT SAFETY INSTRUCTIONS
9 Servicing Of Double-Insulated Appliances
10 Facial cap
11 Changing treatment caps
12 Quick reference guide
14 Usage of the LumaRx™Full-Body Hair Removal System (Indications)
18 Who shouldn't use the LumaRx
™
Full-Body Hair Removal System (Contraindications)
19 WARNINGS
20 PRECAUTIONS
23 Risks
25 What to expect
PAGE
27 Operating Instructions
Step 1: Prepare skin
Step 2: Turn on and unlock the LumaRx Full-Body Hair Removal System
Step 3: Select energy level
Step 4: Test a patch of skin
Step 5: Treat your skin
Other treatment tips
39 User-Maintenance Instructions
Cleaning the LumaRx Full-Body Hair Removal System
Replacing the Lamp Cartridge
Disposal of the LumaRx Full-Body Hair Removal System
44 Troubleshooting
51 Contact information, specifications
52 Customer service, performance guarantee
54 Treatment cards

4 5
HOW DOES THE LUMARX™FULL-BODY HAIR REMOVAL SYSTEM WORK?
Light-based hair removal is a well-estab-
lished technology that has been in use
worldwide for over 15 years. The LumaRx
Full-Body Hair Removal System uses this
technology to flash your skin with
an intense pulse of light. The energy in
the pulse works under the surface of your
skin to target hairs at the root. Because
the energy in the pulse of light targets
dark coloring, it works best on darker
hair. To avoid targeting (and possibly
damaging) dark skin, you should use the
LumaRx Full-Body Hair Removal System
only on light-to-medium skin tones.
How Many Treatments are Needed?
Individual hairs go through a continuous
growth cycle with phases of active growth
and phases of rest. Like other laser or
light-based treatments, the LumaRx
Full-Body Hair Removal System affects
only hairs that are in the active growth
phase. Your initial regimen should be
spread out over 1 month to ensure that
you target the most number of active
hairs (including those that recently cycled
from the resting phase).
We recommend that you use the LumaRx
Full-Body Hair Removal System once
every other week over 1 month (for a total
of 3 treatments) for each area.
If you have redness, blistering or other
skin irritation in the treatment area, DO
NOT perform any additional treatment.
Wait until the skin returns to normal
before using the LumaRx Full-Body Hair
Removal System again. If the irritation
does not go away within 3 days, contact
Customer Service on page 51.
Use the Treatment Record Cards
on pages 56-58 to help keep track of
your treatments.
Results aren’t immediate, but you should
have noticeably fewer hairs within 1 to 2
weeks after you start treatment. During
this time, it may look like the hair is still
growing, but it is actually being “pushed
out.” You may or may not see these hairs
fall out.
INTRODUCING THE LUMARX™FULL-BODY HAIR REMOVAL SYSTEM
Congratulations on the purchase of your
new LumaRx Full-Body Hair Removal
System! The LumaRx Full-Body Hair
Removal System is a new breakthrough
product that uses Intense Pulsed Light
(“IPL”) to remove unwanted hair at-home.
The LumaRx Full-Body Hair Removal
System utilizes the same clinically proven
technology that professional dermatolo-
gists and salons use, but optimized for
personal treatment of smaller areas in the
privacy and comfort of your own home.
Unlike most at-home hair removal
methods, the LumaRx Full-Body Hair
Removal System doesn’t cut or pull out
hair; it actually uses light energy to work
below the skin’s surface to disable active
hairs at the root. You should gradually
notice fewer hairs in the treatment area
within a few weeks, with results generally
improving over time.
The LumaRx Full-Body Hair Removal
System is intended for use on:
• Female Facial Hair (cheeks, sideburns,
chin, neck areas, and above the lips);
with the Facial Cap.
• Male and Female Body Hair (underarms,
bikini line, legs, arms, stomach and
chest) with the Body Cap.
Note: The LumaRx Full-Body Hair
Removal System isn’t for everyone.
Please review the Contraindications,
WARNINGS and PRECAUTIONS starting on
page 19 to determine if the LumaRx
Full-Body Hair Removal System is OK
for you to use.

6 7
Inside your LumaRx Full-Body Hair
Removal System box, you will find the
BASE UNIT, POWER CORD, CLEANING
CLOTH, and this USER’S MANUAL. The
LumaRx Full-Body Hair Removal System
comes with 2 TREATMENT CAPS (for
Body and Facial areas) and a LAMP
CARTRIDGE pre-assembled to the HAND
PIECE. Each lamp cartridge provides
65,000 flashes before it needs to
be replaced.
On the BASE UNIT, the control panel
includes a skin tone sensor to test for
appropriate skin tone before usage,
and allows you to control the energy
level that’s effective and comfortable
for you (see instructions for “Testing the
LumaRx Full-Body Hair Removal System
on a patch of skin” on pages 32-33).
The Power Button is located next to the
POWER SOCKET.
A Power Switch
BPower Socket
CBase Unit
D Hand Piece
E Flash Button
F Cartridge Status Indicator Display
G Cool Down Mode Indicator
H Energy Level Selection Button
I Energy Level Selection Display
J Skin Tone Tester
K Hand Piece Cord
L Flash Window
M Skin Contact Sensors
N Treatment Cap Release Buttons
O Replacement Cartridge
P Body Cap
Q Power Cord
R Lint Free Cloth
SFacial Cap (not shown)
Figure 1
LUMARX™FULL-BODY HAIR REMOVAL SYSTEM DIAGRAM REFERENCE
Getting to know your LumaRx™ Full-Body Hair Removal System

8 9
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER – To reduce the risk of
electrocution:
1. Always unplug this appliance
immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where
it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or
other liquid.
5. Do not reach for an appliance that has
fallen into water. Unplug immediately.
WARNING – To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. An appliance should never be left
unattended when plugged in.
2. Close supervision is necessary when
this appliance is used by, on, or near
children or individuals with certain
disabilities.
3. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by
the manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, or if it has been dropped,
damaged, or dropped into water. Return
the appliance to a service center for
examination and repair.
5. Keep the cord away from heated
surfaces. Do not wrap the cord around
the appliance.
6. Never block the air openings of the
product or place it on a soft surface, such
as a bed or couch, where the air openings
may be blocked. Keep the air openings
free of lint, hair, and the like.
7. Never use while sleeping or drowsy.
8. Never drop or insert any object into any
openings or hose.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Do not pull or carry by cord, use cord
as a handle, close a door on cord, or pull
cord around sharp edges or corners. Do
not run Appliance over cord. Keep cord
away from heated surfaces.
11. Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
12. Do not handle plug or Appliance with
wet hands.
13. Turn off all controls before unplugging.
SAVE THESE
INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance, two
systems of insulation are provided
instead of grounding. No grounding
means is provided on a double-insulated
appliance, nor should a means for
grounding be added to the appliance.
Servicing a double-insulated appliance
requires extreme care and knowledge of
the system, and should be done only by
qualified service personnel. Replacement
parts for a double-insulated appliance
must be identical to the parts they
replace. A double-insulated appliance
is marked with the words “DOUBLE
INSULATION” or “DOUBLE INSULATED.”
The symbol (square within a square)
may also be marked on the appliance.

10 11
Use to treat facial area(s) with the
LumaRx Full-Body Hair Removal System
(female use only).
IMPORTANT: The Facial Cap has been
specially designed to treat female facial
hair. DO NOT use the Body Cap on the
face. See section “Changing Treatment
Caps”for instructions on how to
exchange caps.
Where you can use the Facial Cap
The Facial Cap is intended for use
on female facial hair on the cheeks,
CHANGING TREATMENT CAPSFACIAL CAP
The Facial Cap is specially designed to
treat Female Facial Hair, as it minimizes
light leakage, and can flash every
5 seconds. The Facial Cap is marked
with the icon below:
To change treatment caps, please follow
the instructions provided.
1. Turn the POWER SWITCH off and
unplug the POWER CORD from the
electrical outlet.
Allow the system to cool down for 5
minutes before attempting to change
treatment caps.
2. Hold the treatment cap with one hand
while pressing both Treatment Cap
Release Buttons with the other hand and
pull gently. Store the unused treatment
cap in a safe location (such as in the
packaging) taking care not to damage the
FLASH WINDOW and other components.
3. Gently push the other treatment cap
back into the Hand Piece making sure
both side tabs click into place. NOTE: the
longer tab (with gold circuits) must be on
top to properly fit.
Helpful tips for treating facial hair
• Test on a Patch of Skin.
• Use a Mirror to Guide your Treatments
– using a mirror for a good view of the
area to be treated and to help ensure
you avoid treating the lips or any other
dark spots. If the reflected light is
unpleasant, you may want to close your
eyes before each flash.
• Stretch Skin for Better Skin Contact –
the contours of the skin may make it
difficult for the skin contact sensors to
be fully depressed in certain areas. You
may find it easier to try and wrap your
upper lip over your teeth or use your
tongue to stretch your cheeks for better
skin contact.
Each Sideburn
Each Cheek
Above lips
Chin
Neck
sideburns, chin, neck areas and above the lips as shown in the figure below.
DO NOT use on male beards. See Contraindications on page 18.

12 13
4. PLACE HAND PIECE ON AREA AND
TEST A PATCH OF SKIN
(see pages 28-31)
• If SKIN CONTACT SENSORS are NOT
in contact with skin the system will
“buzz”and will not operate if you press
the FLASH BUTTON. Double check that
the contact sensors are in full contact
with the skin.
• If CONTACT SENSORS are in full
contact with skin the system will
“CHIRP” and is ready to flash.
• If you're having trouble, try pressing
the hand piece firmly against the skin.
• See pages 28-31 for more info on
testing a patch of skin.
5. TREAT YOUR SKIN (see pages 31-37)
• After you hear the “CHIRP” press the
FLASH BUTTON to treat skin
1. PREPARE SKIN (see page 27)
• Shave the hair in the treatment area
• Wipe skin clean and dry completely
2. TURN ON AND UNLOCK THE
LumaRx Full-Body Hair
Removal System
(see page 28)
• Turn POWER SWITCH on
• Place skin in the intended treatment
area on SKIN TONE SENSOR for a
few seconds (TOUCHING SKIN TONE
SENSOR)
• UNSUITABLE skin = “BUZZ” and
orange light; the system will not
unlock
• SUITABLE skin = “BEEP-BEEP,”
green light, and the system will unlock
• You must unlock on each body part you
intend to treat
3. SELECT ENERGY LEVEL
(see page 31)
• The LumaRx Full-Body Hair Removal
System starts out
at the lowest level
• Test your skin at
lower levels before
increasing energy.
• Higher energy levels improve results
but may be less comfortable
• To increase, press the ENERGY LEVEL
SELECTION BUTTON
• For best results use the highest setting
that is comfortable
• When a flash is delivered, you will:
– See a bright flash of light
– Hear a “POP” sound
(the disposable cartridge)
– Feel a mild sensation of
warmth and tingling
• LIFT the HAND PIECE off the skin and
move it to a new treatment area
• DO NOT flash the same treatment spot
multiple times during one session
• Try to treat in a GRID PATTERN
Note: DO NOT physically mark the
treatment area with grid pattern as this
could cause injury to the skin.
Note: This guide is intended to be a
quick reference for experienced users
of the LumaRx Full-Body Hair Removal
System. If this is your first time using the
LumaRx Full-Body Hair Removal System
it is critical that you read the entire Use
and Care Guide for complete directions
for important contraindications,
WARNINGS, benefits and risks and
detailed use instructions.
QUICK REFERENCE GUIDE
SKIN CONTACT SENSORS

14 15
The LumaRx Full-Body Hair Removal
System is an over-the-counter device
indicated for the removal of unwanted
body and/or facial hair in adults with
Fitzpatrick skin types I – IV.
The LumaRx Full-Body Hair Removal
System is also intended for permanent
reduction in unwanted hair.
Permanent hair reduction is defined
as the long-term stable reduction in
the number of hairs regrowing when
measured at 6, 9, and 12 months after
the completion of a treatment regimen.
Skin Tone
The LumaRx Full-Body Hair Removal
System is intended for use only on light to
medium skin tones. To determine if your
Skin Tone is suitable to use with LumaRx
Full-Body Hair Removal System, compare
your skin in the intended treatment areas
with the Skin Tone Chart. If it matches the
Light to Medium Skin Tones, you can use
USAGE OF THE LUMARX™ FULL-BODY HAIR REMOVAL SYSTEM (INDICATIONS)
LumaRx Full-Body Hair Removal System.
If your Skin Tone in the intended treatment
area matches the Dark Skin Tones,
DO NOT use the LumaRx Full-Body
Hair Removal System.
The LumaRx Full-Body Hair Removal
System also has a built-in SKIN TONE
TESTER that is designed to help prevent
flashing on skin that is too dark for
treatment. See pages 28-31 for details.
Test each different area you wish to treat
with the Skin Tone Chart and SKIN TONE
TESTER before treating. Some areas are
darker than others.
If you have tanned skin in the intended
treatment area, DO NOT use the LumaRx
Full-Body Hair Removal System in those
areas as your skin may be too dark for
treatment. You should wait until your tan
has completely faded from any intended
treatment area before using the LumaRx
Full-Body Hair Removal System.
Hair Color
The light energy targets dark coloring in hair, and therefore works best on DARKER
HAIR (black, dark brown, brown or dark blond). DO NOT use the LumaRx Full-Body Hair
Removal System on LIGHTER HAIR (light blond, red, grey or white hairs or “peach fuzz”).
The LumaRx Full-Body Hair Removal System will not work on LIGHTER HAIR.

16 17
Treatment Areas
Male and Female Body Sites
The LumaRx Full-Body Hair Removal
System is intended for use on male and
female body hair on underarms, bikini
line, legs, arms, chest and stomach.
If you have unwanted DARKER HAIR
in any of these areas, the illustration
below lists the typical number of
flashes needed to cover a 1.5” x 3”
treatment area. Treat in a GRID-LIKE
PATTERN – slight overlaps are OK, but
DO NOT flash the same EXACT spot
multiple times during one treatment
session. Record treatments in the
TREATMENT CARDS on pages 56-58.
Note: DO NOT physically mark the
treatment area with grid pattern as this
could cause injury to the skin.
WHAT IS THE LUMARX™ FULL-BODY HAIR REMOVAL SYSTEM USED FOR? (INDICATIONS)
Female Facial Sites
Using the included Facial Cap, the LumaRx Full-Body Hair Removal System is
intended for use on female facial hair on the cheeks, sideburns, chin, neck areas,
and above the lips (see illustration). If you have unwanted DARKER HAIR in any
of these areas, the illustration below lists the typical number of flashes to treat
the entire site (NOTE: for spot treatments of unwanted hair, fewer flashes may be
needed). Record treatments in the TREATMENT CARDS on pages 56-58.
DO NOT use the LumaRx Full-Body Hair Removal System on or around EYES, EYE
LASHES or EYE BROWS. Doing so can cause serious and permanent eye injury.
Each Sideburn - 5 flashes
Each Cheek - 15 flashes
Above lips - 5 flashes
Chin - 10 flashes
Neck - 15 flashes

18 19
WHO SHOULDN'T USE THE LUMARX™FULL-BODY HAIR REMOVAL SYSTEM (CONTRAINDICATIONS)
IMPORTANT SAFETY INFORMATION –
READ BEFORE USE!
The LumaRx Full-Body Hair Removal
System is not designed for everyone.
Please read and consider the information
in the following section before use.
• DO NOT USE the LumaRx Full-Body
Hair Removal System if you have DARK
SKIN. Darker skin may absorb too
much light energy which could cause
skin swelling, temporary blisters, or
could change the color of your skin.
Refer to the Skin Tone Chart on page
15 to determine if your Skin Tone
is suitable for use with the LumaRx
Full-Body Hair Removal System. You
should test each different area of skin
you want to treat. Some areas are
darker than others.
• DO NOT USE the LumaRx Full-Body
Hair Removal System on TATTOOS,
DARK BROWN or BLACK SPOTS (such
as dark freckles, birthmarks, moles, or
warts), LIPS, NIPPLES, GENITALS or
AROUND THE ANUS. These areas have
darker skin and may absorb too much
light energy which could cause skin
swelling, temporary blisters, or could
change the color of your skin.
• DO NOT USE the LumaRx Full-Body
Hair Removal System ON OR AROUND
EYES, EYEBROWS or EYELASHES.
Doing so can cause serious and
permanent eye injury.
• DO NOT USE the LumaRx Full-Body
Hair Removal System anywhere on the
MALE FACE, HEAD OR NECK.
WARNINGS
The LumaRx Full-Body Hair Removal
System is a powerful device. As such it
should be used with special attention
to safety. Please read all WARNINGS
and safety PRECAUTIONS before use
and follow them strictly when using the
LumaRx Full-Body Hair Removal System.
DO NOT flash in an environment
where the emission of light could cause
an explosion, such as in the presence
of gas.
KEEP OUT OF REACH OF CHILDREN!
DO NOT leave the LumaRx Full-Body
Hair Removal System unattended around
children as the cords represent a choking
hazard. Children should be supervised to
ensure that they do not play with
the appliance.
The LumaRx Full-Body Hair
Removal System SHOULD NOT be
used by anyone under the age of 18.
DO NOT use the LumaRx Full-Body
Hair Removal System if you have
a known sensitivity to light
(photosensitivity) or are taking
medications that make your skin more
sensitive to light, as the LumaRx
Full-Body Hair Removal System may
injure your skin or make existing
conditions worse.

20 21
the affected area to heal before using the
LumaRx Full-Body Hair Removal System.
• DO NOT use the LumaRx Full-Body Hair
Removal System if your skin is sensitive
to light. In order to determine if you can
use the LumaRx Full-Body Hair Removal
System, perform a test on a small patch
of skin and wait 24 hours to determine
if there are any adverse reactions
before
using the LumaRx Full-Body Hair Removal
System more broadly. See steps for
testing on a patch of skin on pages 27-31.
Contact Customer Service (see page 51)
for more information or assistance.
• DO NOT use the LumaRx Full-Body Hair
Removal System on any area where you
may someday want your hair to grow
back. The results may be permanent
and irreversible.
• DO NOT flash the LumaRx Full-Body Hair
Removal System against any material
other than skin.
• DO NOT use the LumaRx Full-Body Hair
Removal System for any purpose other
than hair removal.
• DO NOT use the LumaRx Full-Body
Hair Removal System if you are or may
be pregnant or are breast-feeding. The
LumaRx Full-Body Hair Removal System
has not been tested on pregnant women.
Hormonal changes are common during
pregnancy or breast-feeding and could
increase skin sensitivity and the risk of
skin injury.
• DO NOT cover any part of the LumaRx
Full-Body Hair Removal System
ventilation slots during use, as they help
to keep the device cool during operation.
Covering the ventilation slots could result
in the LumaRx Full-Body Hair Removal
System overheating.
• DO NOT use the LumaRx Full-Body Hair
Removal System if the box packaging
or the device appears damaged or if
any part of the LumaRx Full-Body Hair
Removal System body is cracked or
broken. Doing so could increase the risk
of skin or eye injury from the flash lamp.
Contact Customer Service for assistance
(see page 51).
PRECAUTIONS
The LumaRx Full-Body Hair Removal
System is a powerful device. As such it
should be used with special attention to
safety. Please read all WARNINGS and
safety PRECAUTIONS before use and follow
them strictly when using the LumaRx Full-
Body Hair Removal System.
• DO NOT use the LumaRx Full-Body Hair
Removal System if you have TANNED
SKIN in the intended treatment area, as
your skin may be too dark and treatment
in tanned areas could temporarily cause
skin swelling, blisters, or could change
the color of your skin. Wait until your
tan has faded in the treatment area
before treating.
• DO NOT use the LumaRx Full-Body Hair
Removal System on skin with MAKEUP
applied, as treating in those areas could
temporarily cause skin swelling, blisters
or could change the color of your skin.
Make sure to thoroughly clean the
intended treatment area before using the
LumaRx Full-Body Hair Removal System.
• DO NOT flash the LumaRx Full-Body
Hair Removal System on the identical
treatment spot multiple times during
the same session, as this could
temporarily cause skin swelling, blisters,
or could change the color of your skin.
See instructions on pages 31-37 for
more information on how to properly
administer treatment.
• DO NOT treat any area more than once
every other week, as this will not speed
up results, but could increase likelihood
of skin swelling, blistering or changing
the color of your skin.
• DO NOT use the LumaRx Full-Body Hair
Removal System on damaged skin,
including open wounds, cold sores,
sunburns, or areas where you have had
a skin peel or other skin resurfacing
procedure within the last 6-8 weeks.
• DO NOT use the LumaRx Full-Body
Hair Removal System on irritated skin,
including rashes or swollen skin. These
conditions can make the skin more
sensitive to the light treatment. Wait for

22 23
• DO NOT allow the LumaRx Full-Body Hair
Removal System to become damp or
wet. DO NOT use the LumaRx Full-Body
Hair Removal System near bathtubs,
showers, basins, or other vessels
containing water. Failure to follow these
PRECAUTIONS can cause electrocution or
electric shock. Contact Customer Service
for assistance (see page 51).
• DO NOT operate the LumaRx Full-
Body Hair Removal System with an
unapproved power cord, or if it has a
damaged plug or cord. Keep the LumaRx
Full-Body Hair Removal System cord
away from heated surfaces (such as
stoves, fireplaces, radiators or furnaces).
Failure to follow these PRECAUTIONS can
cause electrocution or electric shock.
Contact Customer Service for assistance
(see page 51).
• DO NOT open the LumaRx Full-Body
Hair Removal System (except to replace
the removable TREATMENT CAP and/or
LAMP CARTRIDGE) or attempt to repair
your LumaRx Full-Body Hair Removal
System as it contains no user-serviceable
parts. Trying to open the LumaRx Full-
Body Hair Removal System may also
damage the device and will void your
warranty. Please contact Customer
Service (see page 51) if you have a
broken or damaged device. Failure to
follow these PRECAUTIONS can cause
electrocution or electric shock.
• Hair removal by lasers or intense pulsed
light (IPL) can cause increased hair
growth in some individuals.
• If you’ve had professional or clinical
or self-administered laser or IPL or
electrolysis hair removal treatments,
wait at least 6 months before using the
LumaRx Full-Body Hair Removal System.
If you’ve waxed, plucked or epilated
hair in the treatment area, wait at least
6 weeks before using the LumaRx Full-
Body Hair Removal System. The device
uses the hair under your skin to disable
your hair at the root, so it is not effective
if the hair has been pulled out.
PRECAUTIONS RISKS
It is important to use the LumaRx Full-
Body Hair Removal System properly. Make
sure that you follow all the WARNINGS
(see page 19), and that you do not use the
device if it is not right for you. If you do not
understand any of the WARNINGS, or have
any questions, please contact Customer
Service (see page 51).
If you use the LumaRx Full-Body Hair
Removal System as directed, the risks
are low:
• Your skin may become red within 24
hours after treatment. This redness
generally clears up within a few hours.
If the redness does not go away within
2–3 days, contact Customer Service
(see page 51).
• You may develop temporary blisters,
although these are unlikely for people
with lighter skin tones. If you do develop
a blister, stop using the LumaRx Full-
Body Hair Removal System, clean the
blister and cover it with a bandage and
change daily to help prevent the blister
from becoming infected. If you need
more information, contact Customer
Service (see page 51).
• In rare cases, an outbreak of cold sores
may develop in the area(s) treated
that have a history of cold sores. The
cold sores should heal within 5 to 7
days. If the cold sores do not heal after
7 days, contact Customer Service
(see page 51).
• In rare cases, some users might see
an increase in the number of hairs
growing. This increase is usually
temporary and due to hair growth
cycles. However, if after beginning use
of the LumaRx Full-Body Hair Removal
System you believe that the number of
hairs regrowing in the treated area has
increased since you started treatment,
stop using the LumaRx Full-Body Hair
Removal System and contact Customer
Service (see page 51).
• Skin swelling, especially around the hair
follicle where you may notice the skin is
slightly higher than surrounding areas.
If the swelling doesn’t go away within

24 25
RISKS
2–3 days, stop using the LumaRx
Full-Body Hair Removal System
and contact Customer Service
(see page 51).
• Skin discoloration. If you notice
that your Skin Tone in the treatment
area has changed, stop using the
LumaRx Full-Body Hair Removal
System and contact Customer
Service (see page 51).
• Eye Injury. Flashing any laser or IPL
device near or around the eyes could
cause serious and permanent eye
injury. This is very unlikely as long as
the device is used as indicated.
WHAT TO EXPECT
During Treatment
For many people, using the LumaRx
Full-Body Hair Removal System is their
first experience with a light-based
device. Here are some things to expect
during treatment:
• A Flash of Light: The flash of light
that you see is only part of the light
produced by the LumaRx Full-Body
Hair Removal System and should
not be harmful to your eyes. The
LumaRx Full-Body Hair Removal
System Contact Sensors help ensure
that most of the light is directed into
the skin. The remaining visible light
should not be harmful to the eyes, and
special eye protection is not needed
as long as you follow the directions
for using the LumaRx Full-Body
Hair Removal System in this manual.
The LumaRx Full-Body Hair Removal
System should NOT be used on or
around the eyes, eyelashes
or eyebrows.
• A Sensation of Warmth and Tingling:
It is normal to feel a warm and
tingling sensation with each flash.
Many people describe this sensation
to be like a rubber band lightly
snapped against the skin. However,
sensations vary by person and
treatment area. If the sensation is
too intense or painful, stop using
the LumaRx Full-Body Hair Removal
System and contact Customer Service
before using again (see page 51).
Immediately After the First Treatment
• Visible changes to the hair are
unlikely at this point. During and
just after your LumaRx Full-Body
Hair Removal System session, it is
not uncommon to see some very
mild redness, mostly around the
hairs themselves. This is normal and
typically clears up within a few hours.
If the redness does not go away
within 3 days, contact Customer
Service (see page 51).

26 27
OPERATING INSTRUCTIONS
Once you’ve become familiar with
the LumaRx Full-Body Hair Removal
System and read all the information
on the preceding pages, including the
WARNINGS and PRECAUTIONS, you’re
ready to use the LumaRx Full-Body Hair
Removal System.
This section explains step-by-step
how to operate the LumaRx Full-Body
Hair Removal System. Read this entire
section carefully before you start
treatment. Then refer back to it later as
you follow the steps.
The first time you use the LumaRx
Full-Body Hair Removal System, you
should test it on a small patch of skin.
See steps on pages 27-31.
Each time you use the LumaRx Full-
Body Hair Removal System, make sure
the Hand Piece, Flash Window, Skin
Contact Sensor, and Skin Tone Sensor
are clean and free of debris; clean
the system if necessary. Refer to the
User-Maintenance Instructions on
pages 39-43.
WHAT TO EXPECT
• If you have redness, blistering or
other skin irritation in the treatment
area, DO NOT perform treatment.
Wait until the skin returns to normal
before using the LumaRx Full-Body
Hair Removal System again. If the
irritation does not go away with 3
days, contact Customer Service on
page 51.
One to Two Weeks after the First
Treatment
• Hairs in the treated area will begin to
fall out gradually, but it is unlikely you
will notice significant reduction in hair
at this stage.
• Make sure to complete the full
treatment schedule to ensure you hit
all hairs in the growth phase in the
targeted area.
Two Weeks after the Last Treatment
• You should see a noticeable reduction
in hairs in the treated area. Also, any
new hair growth should be lighter
and finer.
• At this point, additional treatments on
the same area should only be done
as needed to target hairs that have
recently entered the active cycle.
You only need to use the LumaRx
Full-Body Hair Removal System
for occasional touch-ups, where
necessary, or to treat another area.
STEP 1: PREPARE SKIN
Before using the LumaRx Full-Body Hair
Removal System, prepare the treatment
area by thoroughly Cleaning, Shaving,
and Drying the intended treatment area.
It is important that you remove any
makeup from the treatment area.
Removing surface hair and cleaning the
skin helps to minimize the sensation
felt from the LumaRx Full-Body Hair
Removal System flashes and allows
the energy to penetrate to the hair root.
Because the LumaRx Full-Body Hair
Removal System works below the skin,
the device is still effective even if hairs
are not clearly visible.

28 29
2b. Always place the skin tone sensor
window directly on the area of skin
you plan to treat. The reading will take
place automatically.
Note: You must use the Skin Tone Sensor
to test color on each body part you plan
to treat.
2a. Turn the POWER SWITCH on. The
SKIN TONE SENSOR will flash
YELLOW. You will hear a series of
audible “BEEPS” every 5 seconds to
remind you to take the test. For safety
reasons, after 30 seconds of inactivity,
the audible “BEEPS” will increase in
frequency until the test is taken or the
machine is turned off.
SKIN TONE SENSOR LED
will be blinking orange
OPERATING INSTRUCTIONS
STEP 2: TURN ON AND UNLOCK
the LumaRx Full-Body Hair
Removal System.
Flip the POWER SWITCH to turn the
power on.
Each time you turn on the LumaRx
Full-Body Hair Removal System, you will
be prompted to test your skin tone with
the SKIN TONE TESTER. The LumaRx
Full-Body Hair Removal System will play
a melody to remind you to test. See
Figure 2.
NOTE: Using the LumaRx Full-Body Hair
Removal System on darker skin tones
can result in damage to the skin (such
as burns, blisters or skin discoloration).
To help protect against such damage,
the LumaRx Full-Body Hair Removal
System requires that you test your skin
tone before every use. Since some skin
areas are darker than others, test each
different area you want to treat.
DO NOT use the LumaRx Full-Body
Hair Removal System on tanned skin.
Even if your natural skin tone is light,
tanning makes it darker – potentially
too dark for treatment. With tanned skin,
wait until the tan has completely faded
before using the LumaRx Full-Body Hair
Removal System on that area.
Always use the Skin tone sensor to
determine if your Skin is too dark to treat
with the LumaRx Full-Body Hair Removal
System by placing the Skin Tone Sensor
on the area to be treated. Make sure
your skin in this area is clean and dry,
and shave it if necessary to be sure it is
free of hair.
This appliance has a polarized plug
(one blade is wider than the other). As
a safety feature, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to
defeat this safety feature.
Figure 2

30 31
Notes:
• Some areas of skin are darker than
others. You must use the SKIN TONE
SENSOR on each different area you
want to treat.
• If you feel the SKIN TONE SENSOR
has not made a proper reading, you
may try again after 5 seconds. If you
believe your skin is suitable based
on the Skin Tone chart on page 15
but the SKIN TONE SENSOR will not
enable the device, contact Customer
Service (see page 51).
• If you have tanned skin in the intended
treatment area, DO NOT use the
LumaRx Full-Body Hair Removal
System in those areas as your skin may
be too dark for treatment. You should
wait until your tan has completely faded
from any intended treatment area
before using the LumaRx Full-Body
Hair Removal System.
2c. Place the body part to be treated over
the SKIN TONE SENSOR (touching the
unit) the Sensor will immediately read
the skin type.
2e. If your Skin Tone is suitable for use,
a high-pitched “BEEP” will sound
and the SKIN TONE SENSOR will turn
green and the device is ready for use.
2d. If your Skin Tone is NOT suitable for
use, the SKIN TONE SENSOR turns solid
YELLOW and the device will “BUZZ”
once for 5 seconds. After 5 seconds,
you may re-try the SKIN TONE SENSOR
(step 1 above).
2f. Once the device is enabled, the
ENERGY LEVEL LIGHT and BULB LIFE
LIGHT will turn on and the internal fan
will start. Your LumaRx Full-Body Hair
Removal System is set to the lowest
energy level setting and ready for use!
STEP 3: SELECT ENERGY LEVEL
Energy Level Indicator Lights determine
the intensity of the LumaRx Full-Body
Hair Removal System light flash
delivered to your skin, from the lowest
level (*) to the highest level (*****).
Higher levels improve hair removal
results, but may be less comfortable.
To get the best results, you should use
the highest setting that’s comfortable.
There are 5 energy level settings on the
LumaRx Full-Body Hair Removal System.
Whenever the device is turned on, it is
automatically set to the lowest energy level
and only 1 ENERGY LEVEL INDICATOR
LIGHT will be on (ENERGY LEVEL 1 in the
table below). To modify the energy level,
press the ENERGY LEVEL SETTING BUTTON
to increase the energy level. Once the
energy level has reached level 5, pressing
the ENERGY LEVEL SETTING BUTTON will
return the device to energy level 1. The
number of ENERGY LEVEL INDICATOR
LIGHTS will coincide with the change in
energy level. See Figure 3 on page 32.
OPERATING INSTRUCTIONS

32 33
LEVEL SETTING BUTTON until the desired
lower energy setting is set. After reaching
Level 5, pressing the ENERGY LEVEL
SETTING BUTTON an additional time will
reset to Energy Level 1.
As with any new skin care product, we
recommend testing the LumaRx Full-Body
Hair Removal System on a patch of skin
before your first full treatment or before
treating a new area.
STEP 4: TEST A PATCH OF SKIN
Testing the LumaRx Full-Body Hair
Removal System helps you determine the
appropriate Energy Level to use the first
time you use the device, or for each new
treatment area. Higher Energy Levels are
more effective at removing hair, but may
be less comfortable. To get the best results
Energy Level 1 2345
Press Energy
Level Setting
Button
Defaults to Level
1 upon start-up.
Energy Level
Selection Display
Lights:
3a. Upon start-up, the device sets itself to the
lowest energy level (Level 1 above). The
device is now ready to trigger the first
flash. (See “Using the
LumaRx Full-Body
Hair Removal System”
).
3b.
To change the energy level press
the ENERGY LEVEL SETTING BUTTON
to increase the energy level until the
desired energy level is set (for example,
pressing the ENERGY LEVEL SETTING
BUTTON once will increase from Level
1 to Level 2; pressing another time will
increase to Level 3). ENERGY LEVEL
INDICATOR LIGHTS will coincide with
the energy level setting.
3c.
If a higher energy level was previously
selected and a lower energy level is
desired, continue to press the ENERGY
with the LumaRx Full-Body Hair Removal
System, you should use the highest Energy
Level setting that’s comfortable and does
not cause an adverse skin reaction.
To test the LumaRx Full-Body Hair Removal
System on a new treatment area, follow
these steps:
Start at Energy Level 1. The LumaRx
Full-Body Hair Removal System defaults to
Energy Level 1, which is where you should
start the Patch of Skin Test.
Flash your Skin (see pages 34-37).
With the LumaRx Full-Body Hair Removal
System at Energy Level 1, treat your skin
with one single flash by firmly placing
the flash window flat against skin (you
should hear a “CHIRP” and the SKIN TONE
SENSOR light should be GREEN). Press the
FLASH BUTTON to deliver a flash.
Mild to moderate discomfort is normal. If
you feel more than moderate pain, stop
using the LumaRx Full-Body Hair Removal
System immediately and call Customer
Service (see page 51) for help.
• If a flash delivered at Energy Level 1
feels tolerable, press the ENERGY LEVEL
button once to change to Energy Level 2.
Move the device to a different spot and
flash the LumaRx Full-Body Hair Removal
System one more time. Repeat this
process until you find the highest setting
that feels right for you.
• Wait 24 hours and then look at the
test areas. If the skin appears normal,
proceed with your first full treatment at
the highest setting. Record this level in
your Treatment Cards on pages 56-58.
If you notice blistering, burns, changes
in your Skin Tone, or any other side effects,
or if you are not sure about the outcome
of the test, DO NOT USE the LumaRx Full-
Body Hair Removal System and contact
Customer Service page 51 for assistance.
Repeat the test if you decide to try the
LumaRx Full-Body Hair Removal System
on a different part of the face, or if your
skin tone has changed (for example, from
a sun tan).
Figure 3
OPERATING INSTRUCTIONS

34 35
STEP 5: TREAT YOUR SKIN
The LumaRx Full-Body Hair Removal
System can flash approximately every 3
seconds (with the Body Treatment Cap)
and is ideal for treating both larger and
smaller areas.
Periodically, if either the hand piece or
base unit gets too hot, the “Hourglass”
icon will flash and the unit will beep.
Wait for a few minutes to allow the
LumaRx Full-Body Hair Removal System
to cool down. There is no need to shut
the unit down, as the hourglass and
beeps will turn off when the LumaRx
Full-Body Hair Removal System is ready
to use again. The number of flashes
delivered before the cool down state
depends on several factors, including
how fast you apply the treatments, and
the room temperature. See Figure 5.
5a. Ensure that the ENERGY LEVEL is
on the correct setting (See “Choose
Energy Level” on page 31 for details
about the different settings).
5b. Apply the treatment cap to the skin,
making sure the skin is spread
evenly and smoothly. Make sure the
CONTACT SENSORS on the treatment
cap are in full contact with the skin.
SKIN CONTACT SENSORS
5c. If the CONTACT SENSORS are NOT in
full contact with the skin, the device
will not operate if you press the
FLASH BUTTON and it will “BUZZ.”
Double check that the contact sensors
are in full contact with the skin.
5d. If the CONTACT SENSORS on the
treatment cap are in full contact with
the skin, LumaRx will “CHIRP”
indicating the device is OK to flash.
5e. Press the FLASH BUTTON. The device
will flash a pulse of light onto your
skin. You will see a flash of light and
simultaneously hear a sound, which is
normal for the device. You may feel a
mild sensation of warmth and tingling.
Figure 5
OPERATING INSTRUCTIONS

36 37
5f. Immediately after a flash is delivered,
move the HAND PIECE to a new
treatment location while keeping the
FLASH BUTTON pressed down. After
5 seconds the BULB LIFE LIGHT will
turn on again and the device will beep.
If the treatment cap is in full contact
with the skin and the FLASH BUTTON
is pressed down, another flash will
be delivered.
After a flash is delivered, lift the hand
piece to the next area in a grid-format.
NOTE: If the button is kept depressed, the
hand piece can be slid between spots.
About 3 seconds later (assuming Contact
Sensors are in contact with skin), the
device will once again emit a “BEEP” to
confirm that it is ready to flash.
The device will operate if FLASH BUTTON
is pressed.
5g. Try to treat in an organized, grid-
like pattern to ensure you cover all
hairs in the intended treatment area.
WARNING: DO NOT flash the LumaRx
Full-Body Hair Removal System on
the same treatment spot multiple
times during the same session, as
this could cause skin swelling, tempo-
rary blisters, or could change the color
of your skin.
Repeat step 5 until the desired treatment
area is fully covered. Depending on the
area, the treatment time will vary.
NOTE: For faster coverage you may hold
down the FLASH BUTTON while you lift
the HAND PIECE and place it back in con-
tact with a new area to be treated. This
will cause the unit to deliver a flash to the
skin as soon as full contact between the
skin and the treatment cap is established.
Recommended Treatment Schedule
Your initial regimen should be spread out
over 1 month to ensure that you target
the most number of active hairs (including
those that recently cycled from the
resting phase).
We recommend that you use the
LumaRx Full-Body Hair Removal
System once a week, every other
week, over a month (for a total of 3
treatments) on each area.
If you have redness, blistering or other
skin irritation in the treatment area, DO
NOT perform the treatment. Wait until the
skin returns to normal before using the
LumaRx Full-Body Hair Removal System
again. If the irritation does not go away
with 3 days, contact Customer Service on
page 51.
OPERATING INSTRUCTIONS

38 39
OTHER TREATMENT TIPS
• Perform your treatments at night before
going to bed, so that any lingering
redness will most likely disappear by
the morning.
• If you’ve waxed hair in the treatment
area, wait 6 weeks before using the
LumaRx Full-Body Hair Removal
System. The device uses the hair under
your skin to disable your hair at the
root, so it is not effective if the hair has
been pulled out.
• Shave immediately before treating the
area. Doing this will let you use a higher
Energy Level, because there will be
less hair to heat up and the treatment
will sting less. How well you shave
will make a big difference in how the
treatment feels. See page 27.
• Periodically, if the device gets too hot,
the “Hourglass” icon will flash and the
unit will beep. Wait for a few minutes
to allow the LumaRx Full-Body Hair
Removal System to cool down. There
is no need to shut the unit down, as
the hourglass icon will disappear when
the LumaRx Full-Body Hair Removal
System is ready to use again.
• The number of flashes delivered before
the cool down state depends on several
factors, including how fast you apply the
treatments and the room temperature.
• Use the highest Energy Level setting
that’s comfortable for you and that does
not cause an adverse reaction. Higher
Energy Levels are more effective. See
page 31.
OPERATING INSTRUCTIONS USER-MAINTENANCE INSTRUCTIONS
When your LumaRx Full-Body Hair
Removal System session is over, we
suggest the following:
• Be sure to record your treatment in
the Treatment Cards on pages 56-58.
• Turn the LumaRx Full-Body Hair
Removal System off by pressing the
POWER BUTTON.
• After each hair removal session, clean
your LumaRx Full-Body Hair Removal
System, especially the CAP and LIGHT
WINDOW (See “Cleaning the LumaRx
Full-Body Hair Removal System”).
• After cleaning, store your LumaRx
Full-Body Hair Removal System in
its original box and keep it away
from water.
CLEANING the LumaRx Full-Body Hair
Removal System
After each session, clean your LumaRx
Full-Body Hair Removal System, especially
the LIGHT WINDOW, the CONTACT SENSORS,
and the SKIN TONE SENSOR window.
DO NOT place any part of the LumaRx
Full-Body Hair Removal System in water
or other liquids. If any part of the LumaRx
Full-Body Hair Removal System gets wet,
DO NOT USE. Contact Customer Service
on page 51 for help. As with any electrical
device, a wet LumaRx Full-Body Hair
Removal System could cause electrocution
or electric shock.
• Make sure the LumaRx Full-Body Hair
Removal System is turned off. Remove
the POWER CORD from the device and
wall socket before cleaning.
• Use a clean, lint-free cloth (one is
provided with the unit) or a cotton swab
to gently wipe the LumaRx Full-Body Hair
Removal System surface and especially
the CAP, LIGHT WINDOW, CONTACT