Lush Banners LH15 User manual

PARTS LIST
Qty 6 - Straight Connectors
Qty 2 - 4x3 Pop Up Frame Qty 8 - 4 Section
Channel Bars
Qty 8 - 3 Section
Channel Bars
Qty 8 - End Cap
Channel Bars
Qty 4 - Channel Bar Bags
Qty 2 - Carry Bags
Qty 8 - Ladder Light Sets
Qty 8 - Transformer Power Cords
Qty 8 - Transformers
Qty 8 - Ladder Light
Travel Bags
SKU: LH15
Bright LED Backlit Display (20' x 7.5' x 4')

SET UP INSTRUCTIONS 1/2
Set Up Pop Up Frame
a. Place frame withtheadjustable feet
facing down.
b. Expand the frame. c. Close frame by pushing the outside of the
frame until male and female ends connect.
Insert Channel Bars
Unfold The Hooks
a. Expand each channel bar.
Follow bungee to connect.
b. Attach channel bars to frame. c. Slide channels bars onto
frame, from top to bottom, then
secure onto metal peg.
d. Attach the top and bottom end-
caps oneach side of the frame.
a. Locate each hook. b. Turn each hook outward. c. Twist each hook to face the front of the
ladder light.
SKU: LH15
Bright LED Backlit Display (20' x 7.5' x 4')

a. In each corner, insert the silicone edge
beading into the groove.
b. Then insert the remainder of the beading.
Repeat blockout installation for the back frame.
c.Then repeat graphic installation on the end
caps for each side.
Install Graphic
a. Hang ladder lights from top “x” bar. Note:Make sure to
follow label that says “UP”or “DOWN”.
Hook Ladder Lights
b. Hang ladder lights in each sectionof theframe until reach-
ing the bottom of the frame.
a. Connect each ladder light together using
the barrel connectors.
b. Connect bottom set of lights tothe LED
Driver using the barrel connectors
c.Insert powercord to the LED Driver. Plug
other side into your mainpower outlet.
SET UP INSTRUCTIONS 2/2
Connect Ladder Lights
SKU: LH15
Bright LED Backlit Display (20' x 7.5' x 4')

SET UP INSTRUCTIONS
Connecting Wall
Straight Connection
Place the(2) 4x3frames side by side.
*Starting from behind, make sure
each other.
*Back side of the 4x3's shown above.Turn dial to the left to lock the Straight Connector in place. Repeat for
each vertical sections (6 total).
SlideStraight Connector onto the
channel bars of both frames.
Note: Rendering shown without graphics for clarity.
SKU: LH15
Bright LED Backlit Display (20' x 7.5' x 4')