Lux Products LP1530 User manual

With Lantern on Low
High
ANSI/PLATO FL1 STANDARD
572 lm
LUMENSMODES
3h 45m
RUN TIME
25m
Low 37 lm 29h 45m 6m
BEAM
DISTANCE
With Lantern on High 3h 45m
21h 45m
With Lantern Off 99h 45m
USER MANUAL
Lantern Operation Instructions
Rechargeable battery built-in
Bluetooth speaker & controls
360° LEDs for continuous and even light
Power bank to charge portable devices
Variable mode dial
O-ring sealed weather-resistant
Rubberized metal handle
USB-C charging cable included
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale,UT 84065
luxpro.com
866.553.8886
Bluetooth Speaker Run Times on Lowest Volume
Rechargeable Lantern &
Bluetooth Speaker
LP1530
Lantern On/Off: Turn the dial on the top of the lantern clockwise
to turn the light on. Turn the dial counterclockwise to turn the
light off.
Adjust Brightness: Turn the dial clockwise to increase the
brightness, and counterclockwise to decrease the brightness.
USB-C
Rechargeable
Speaker On: Press the Bluetooth symbol to turn on the speaker.
The buttons will illuminate, the speaker will play an audible“on”
sound, and it will automatically enter pairing mode.
Bluetooth Pairing: Turn on your Bluetooth device that you would
like to pair to the speaker and enter pairing mode. Select LUXPRO
1530. The speaker will play an audible sound indicating the
speaker is paired to your device.
Play/Pause: Press the play/pause button to play and pause your
music.
Volume: Press the “  ” button to turn the volume down. Press the
“ +” button to turn the volume up. The speaker will beep when
max volume is reached.
Next/Back: To skip to the next song, press and hold the “ +”
button. To start the current song over, press and hold the “  ”
button. To skip to the previous song, press and hold the “  ”
button. This will start the current song over, then press and hold
the “  ” button again to skip to the previous song.
Speaker Off: Press the Bluetooth symbol to turn off the speaker.
The speaker will play an audible“off” sound.
Speaker Operation Instructions
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Luxpro® is under license.
Other trademarks and trade names are those of their respective owners.

The LP1530 has a Limited 1-Year Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to [e-mail]
Product Warranty
USER MANUAL
14725 S Porter Rockwell Blvd Ste C
Bluffdale,UT 84065
luxpro.com
866.553.8886
Charging Instructions
Charging Lantern: To charge the lantern, locate the USB dust
cover on the front of the light, near the bottom. Lift the cover to
expose the two charging ports.
Plug the supplied USB cable into the smaller USB port on the
right. Plug the opposite end of the cable into a USB power source.
A red LED light next to the smaller USB port will light up to
indicate the lantern is charging. The lantern is fully charged once
the LED turns green.
The lantern and speaker can be used during charging.
The lantern will fully charge in approximately 8 hours.
Charging Other Devices: The LP1530 can also be used as a
power bank to charge other devices. To use as a power bank, plug
the large end of your charging cable into the larger USB port on
the left. Plug the oppostie end of the cable into your device.
The lantern and speaker can be used while the lantern is charging
other devices.