LuxenHome WHAP683 User manual

Product Name:
Pre-Lit Clear LED Porch Artificial Christmas Tree with Base
SKU #:
WHAP683 (5ft)
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
Before you start to assemble your tree, choose a location near a wall outlet. Make sure the tree stand
is placed on a level surface.
Assembly Instructions:
Assemble Yellow Labels Together

Product Name:
Pre-Lit Clear LED Porch Artificial Christmas Tree with Base
SKU #:
WHAP683 (5ft)
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
1. Each tree section is identified with a tag named A or B. Please identify all sections before assembling.
2. Please remove protective cap and assemble the tree from the bottom to the top. Insert the bottom section
of tree body into the pot.
3. Please continue inserting the top section of tree body into the bottom section of tree body.
4. Connect the light strings as per the color labels indicated in Fig. A and insert yellow label plug into the wall
outlet. Your entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs
and/or broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and
life expectancy of your pre-lit tree.
5. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the
pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. B)
6. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look.
Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated.
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations. First unplug the power cord from the wall outlet and then
disconnect light cord between each section of the tree.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below and fold all branches toward the pole.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and
rotate the upper pole in both directions. Lift up the upper pole again.
4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward
the pole until the bottom section is removed from the tree stand.
5. Carefully place all tree sections into shipping box and tape it shut.
6. Store the product in a cool, dry location protected from sunlight where the temperature does not exceed
35˚C (95˚F).
MADE IN CHINA