MagicBox MBX2 User manual

Bluetooth Speaker

22
CONTENTS
Important safety information � � � � � � � � � � � � � � � � � � � � � � � � � 3
Product set up � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
What’s in the box? � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Where to put your Bluetooth speaker � � � � � � � � � � � � � � � � � 4
Setting up � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Disconnect a Bluetooth connection � � � � � � � � � � � � � � � � � � � 5
Clear the Bluetooth Pairing record � � � � � � � � � � � � � � � � � � � � 5
Your Bluetooth speaker � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Using your Bluetooth speaker � � � � � � � � � � � � � � � � � � � � � � � � � 8
Switch on/o � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Changing modes � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Adjusting the volume � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Listening to Music/Audio using Bluetooth
via your Bluetooth speaker � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Aux in mode � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Simple solutions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Technical specication � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
Consumer Product Warranty � � � � � � � � � � � � � � � � � � � � � � � � � 12

3
Your Bluetooth speaker should be treated with care� The
information below has been provided in the interest of safety
and will help you to enjoy this product and the benets it brings
for many years�
• Keep the product and all its parts out of reach of small
children�
• Keep it dry� Avoid exposure to precipitation, humidity and
liquids which could all aect the product circuitry�
• Do NOT leave it in high temperatures as electronic devices
and plastic parts may warp in heat�
• Do NOT leave it in low temperatures as moisture can form
inside the product, which may damage the circuit board�
• Do NOT store in dusty or dirty areas�
• Do NOT use harsh chemicals, cleaning solvents or
detergents to clean the product� Wipe with a damp (not
wet) soft cloth to clean�
• Do NOT attempt to open the product� Unauthorised
handling of the device may damage it and will void your
warranty�
• Only use the power supply that came with the product�
Using an unauthorised power supply will invalidate your
guarantee and may irrecoverably damage the product�
• Where the mains power plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable�
•Do NOT use your Bluetooth speaker near emergency/
intensive care medical equipment; if you have a pacemaker
tted or during an electrical storm�
IMPORTANT SAFETY INFORMATION

4
What’s in the box?
 •1xBluetoothspeaker
 •1xMainspoweradaptor
 •1xUsermanual
Where to put your Bluetooth speaker
It is important that you consider carefully in advance where
your product will be situated and make sure that it is:
* on a at and stable surface
* within 1�4 metres of a power socket
* away from bright sunlight or heat sources, such as a radiator
* not in a humid or very damp place such as a bathroom
Setting Up
1� Connect the mains power lead into the socket on the back of
the Bluetooth speaker and plug the power adaptor into the
mains power wall socket and switch on�
2� The button on the top of the Bluetooth speaker will
slowly ash red and blue alternately, conrming that the
product is now in Standby mode�
3� Press and release the button to power on the product�
The button will now ash blue quickly and will be in
Bluetooth pairing mode�
Note: Your Bluetooth speaker will remain in Bluetooth pairing
mode for 3 minutes� If a successful Bluetooth connection is
not made within this time, the speaker will exit pairing mode
and the button will now ash blue slowly� Press and
release the button to restart pairing mode�
4� On the device that you would like to connect to your
Bluetooth speaker (e�g� iPhone/iPad/Android/other phone/
Computer), turn on Bluetooth connectivity and ensure that it
is ‘discoverable’�
Note: If necessary, refer to the instructions for your device to
add or set up Bluetooth)
5� Select to ‘Add new device’, if necessary�
Note: Some products will automatically search for a new
device and so the ‘Add new device’option is not available�
6� When found, your Bluetooth speaker will be displayed as
‘Audio device’ or ‘MBX2’� Select the device name to begin
pairing�
PRODUCT SET UP

5
7� When pairing is complete the ashing blue LED on your
Bluetooth speaker will stop ashing and will remain on
continuously�
8� Now that you have paired your device with the Bluetooth
speaker, it will connect to it when it is within range, which is
about 10 metres or less (33 feet or less), line of sight�
Note: Please disconnect any Bluetooth connections to the
Bluetooth speaker, before setting up a new connection or
‘pairing’�
Disconnect a Bluetooth connection
1� Press and hold the and buttons at the same time
to disconnect a bluetooth connection� The button will
begin to ash blue quickly and will be in pairing mode� You
can now pair it with another Bluetooth device�
Clear the Bluetooth Pairing record
1� Press and hold the and buttons at the same time to
clear the bluetooth pairing record�

6
Vol - Vol +
Top view
Power on/Standby
YOUR BLUETOOTH SPEAKER
Front view
Speaker

7
YOUR BLUETOOTH SPEAKER
7
Back view
Mains power socketAux in socket

8
Switch on/o
To turn the speaker on:
• Pressandreleasethe button on the top of the speaker�
The product will switch on�
Note: If you power on your product in Bluetooth mode the
button will be blue and if you power on your product in
Aux in mode, the button will be red�
To turn the speaker o:
• Pressandholdthe button for approximately 5 seconds to
go to Standby mode�
Note: To completely disconnect your Bluetooth speaker
product, please switch o the mains power at the plug
socket�
Changing modes
• Brieypressthe button to switch between Bluetooth and
Aux in modes�
Bluetooth mode:
The button on the top of the product will be blue�
Aux in mode:
The button on the top of the product will be red�
Adjusting the volume
To increase the volume:
• Pressandreleasethe button on the top of the speaker�
• Pressandholdthe button on the top of the speaker to
progressively increase the volume�
To decrease the volume:
• Pressandreleasethe button on the top of the speaker�
• Pressandholdthe button on the top of the speaker to
progressively decrease the volume�
USING YOUR BLUETOOTH SPEAKER

9
Listening to Music/Audio using Bluetooth, via
your Bluetooth speaker
In Bluetooth mode:
1� Select and start the music or audio that you wish to listen to
on your paired Bluetooth device�
Note: If your previously paired device is within range
(less than 10 metres/33 feet, line of sight), but does not
automatically connect with the Bluetooth speaker, go to the
Bluetooth connectivity settings on your device and select
‘MBX2’ to reconnect�
2� You can use the controls on your Bluetooth device as normal
when it is paired with the Bluetooth speaker but you can also
press and release the button on your Bluetooth speaker
each time you wish to Play or Pause the music�
Aux in mode
Using the Aux in socket on the back of the speaker you can
connect an external sound source with a Line or Headphone
analogue output to play through your speaker�
Connecting to the Audio Input socket
• InAuxinmode,connecta3.5mmAudioInputcable(not
included), between the headphone or LINE/AUX output of
the external secondary device and the Aux in socket on the
back of the speaker�
To gain optimal volume levels, adjust the output volume
level on both the external secondary device and on your
speaker�

10
SIMPLE SOLUTIONS
If you are experiencing problems with your Bluetooth
speaker there are some quick and easy checks that you
can do, which may help to solve the problem.
Unable to connect or ‘pair’ with a Bluetooth device
- Check that you are in Bluetooth mode�
- Ensure that you are within range of the Bluetooth speaker for
Bluetooth functionality (less than 10 metres/33 feet, line of
sight)
- Ensure that any previously ‘paired’ devices have been
disconnected�
- Move the Bluetooth speaker and Bluetooth device away from
other Bluetooth devices/electrical equipment�
- If possible, turn o other nearby Bluetooth devices or disable
their Bluetooth functionality�
No sound/low volume:
- Adjust the volume using the button�
- Check that the mains power lead is connected at the back of
the product, the mains power wall socket is switched on, you
have pressed the button and are in the correct mode
(Bluetooth or Aux in)�
- In Aux in mode, check that the volume control is turned up
on the external source�

11
TECHNICAL SPECIFICATION
Technical specication
Output: 1 x 10W RMS
Aux In: Stereo socket 3�5mm diameter
Power adaptor:
AC Input: 100-240V, 50/60Hz
DC Output: 12V, 1A

Consumer Product Warranty
Australia & New Zealand Standard Warranty
For Magicbox Products
Consumer Product Warranty (Warranty against Defects)
The purchase of a Magicbox product (hereinafter referred to
in this Standard Warranty as “good(s)”) includes coverage by
the Magicbox Standard Warranty� The Magicbox Standard
Warranty is provided by: Standard Radio Distributors trading
as Canohm (ABN 57 004 817 949), 3/200 Turner Street, Port
Melbourne, Victoria 3207 Australia� Ph: 03 9644 7888,
Email: [email protected]
Warranty terms and conditions
1�1 Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law� You are entitled to a
replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage� You
are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure
does not amount to a major failure� The benets provided
in this Standard Warranty are in addition to other rights and
remedies you may have under law�
1�2 Subject to the above, as part of your Standard Warranty
Canohm agrees to repair or replace at Canohm’s cost the
goods (which includes a supplied Magicbox accessory)
purchased by you in Australia or New Zealand from a
Magicbox Authorised Dealer when the good does not
perform in accordance with the manufacturer’s specications
during the Warranty Term specied below, commencing from
the date of purchase�
1�3 Goods returned for repair may be modied or repaired with
refurbished parts of the same type� Replacement of the good
or a part does not extend or restart the Warranty Term�
1�4 In the case of a good presented for repair which is capable of
retaining user-generated data (e�g� internal memory), you are
advised that the repair process of the good may result in loss
of that data�
1�5 The good will be at the owner’s risk whilst in transit to
and from the Canohm Authorised Service Centre, unless
transported by Canohm or its Authorised representatives�
1�6 Transportation of the good to Canohm or its Service Centre
is at your cost� Canohm will not be liable for any damage
caused to the good whilst in transit�
12

13
1�7 The cost of repair or replacement of the good shall be at
Canohm’s cost but Canohm and its Authorised Service
Centres may seek reimbursement of any costs incurred by
them when the good is found to be in proper working order�
General exclusions and limitations
2�0 To the full extent permitted by law, but subject always to
clause 1�1, the Standard Warranty will not apply:
(a)� If the good has not been installed, operated, maintained
or used in accordance with the manufacturer’s
instructions or specications provided with the good�
(b)� If the serial number has been altered or removed from
the good�
(c)� To damage as a result of malfunction or failure resulting
from alterations, accident, misuse, abuse, re, liquid
spillage, faulty or mis-adjustment of customer controls,
use on an incorrect voltage, voltage supply problems,
power surges and dips, thunderstorm activity, acts of
God, tampering or unauthorised repairs by any persons,
use of defective or incompatible accessories, the
operation of a computer virus of any kind, exposure to
conditions that are known to cause damage or entry by
any foreign object in the good�
(d)� To damage arising out of or during transportation,
installation or while moving the good, or to any
transportation costs of the good or any parts thereof to
and from the owner, unless otherwise specied in these
warranty terms�
(e)� To any third-party software or hardware not
contained in the good as originally congured by the
manufacturer�
(f)� To any failure, to the extent that the failure is not a
failure of the good to perform in accordance with its
specications�
(g)� To replacement or repair of any:
(I)� consumables (including batteries and cables), or
(II)� lost parts or accessories�
(h)� To service of any good whilst it is outside Australia and
New Zealand�
(i)� To any wear and tear if the good is used in commercial,
industrial, educational or rental applications�

3�0 To the full extent permitted by law but subject always to
clause 1�1:
(a)� Canohm will not be liable for any loss, damage or
alterations to:
(I)� third party hardware or software; or
(II)� programs, data or information stored on any
media or any part of the good, no matter how
occurring; or for any loss or damage arising from
loss of use, loss of prots or revenue, or for any
resulting indirect or consequential loss or damage�
Making a Claim
4�0 To make a claim under the Standard Warranty you will need
to:
(a)� Contact Canohm (contact details below) to notify your
claim and provide sucient details to enable Canohm to
assess the claim� In order to assist with this process you
may visit the Support section located on the Magicbox
website�
(b)� Provide or make the good available to Canohm or a
Canohm Authorised Service Centre� If you are required
to return the good to a Canohm Authorised Service
Centre, Canohm will provide details of the centre to you�
(c)� Provide proof of purchase of the good(s) (e�g� invoice
or purchase receipt) at the time of making your claim
(unless not required by law)�
All Magicbox Products have a 1 year warranty.
For further details or to nd your nearest Magicbox
Authorised Service Centre please contact:
Australia Toll Free on 1800 636 026
Web: www.magicboxaudio.com.au
or email [email protected]
New Zealand Toll Free on 0800 486 435
Web: www.magicboxaudio.co.nz
or email: [e-mail]
14

Issue 1/Jul13