Magliner 302727 User manual

Gemini XL Replacement Deck
Assembly Instructions
www.magliner.com
Kit 302727 consists of items below: 1
1 Deck Sheet, Riveted 1 302719
2 Deck Clip, Extruded 2 302720
3 Plate, Deck Sheet 1 85984
4 Deck Clip, Gemini XL Lower 1 302699
5 Deck Clip, Gemini XL Center 1 302698
6 Screw, Truss Head, 10-32 x 1/2 8 80220
7 Nut, Hex Lock, 10-32 Thread 8 80684
ITEM DESCRIPTION QTY. PART NO.
PARTS LIST
TOOLS REQUIRED
• (1) 3/8” WRENCH
• (1) PHILLIPS SCREWDRIVER
• (1) SOFT FACED MALLET OR HAMMER
• (1) WOOD BLOCK
1. Note the position and orientation of the clips on
the deck sheet. Be sure to note that the center
full length clip is longer than the lower clip.
2. Remove the hardware attaching the clips and plate
to deck, retain for re-use.
3. Install the clips on the frame cross bars in the
same position and orientation as they were on
the deck. A soft mallet or hammer and wood
block may be used to gently tap the clips into
position, being careful to keep the clips straight
so they are not bent. Once installed the clips will
slide on the crossbars.
4. Position the deck sheet on the frame and slide
the clips as required to align mounting holes.
Install all hardware loosely.
5. Position the bottom plate behind the nose and
install hardware.
6. Tighten all hardware securely.
Side View

Date of Purchase Record
Fax this form to Magline, Inc. 1-800-968-7504.
Please Print All Information Clearly
Purchase Date: _________________________________________________
Company Name:________________________________________________
Contact Name: _________________________________________________
Title: _________________________________________________________
E-mail: _______________________________________________________
Address: ______________________________________________________
City: ______________________ State:_____ Postal Code: ___________
Country: ______________________________________________________
Phone: _______________________________________________________
Fax: __________________________________________________________
Purchased From: _______________________________________________
Product Purchased: _____________________________________________
Model Number: ________________________________________________
No. of Routes: __________________________________________________
Business Type:
____ Beer ____ Soft Drink ____ Healthcare
____ Food Service ____ Parcel
____ Bakery ____ Snacks
____ Vending ____ Bottled Water
____ Other: ________________________________
1205 West Cedar Street
Standish, Ml 48658 USA
1-800-MAGLINE (624-5463)
[phone] (outside U.S. & Canada)
[e-mail]
www.magliner.com
B8170 Revised 1/11 © Copyright 2006-2011 Magline, Inc.
WARRANTY INFORMATION
Magline One-Year Limited Warranty
Magliner products have a one (1) year warranty from the date of purchase against defects in workmanship or
material.
Any part or component, except items covered by warranties of other manufacturers, returned to the factory or
service center freight prepaid by the owner, found upon examination by Magline, Inc. to be defective or the result
of improper workmanship by the factory will be repaired or replaced without charge and returned to the owner
freight prepaid by Magline, Inc.
Alterations of Magliner products void any warranty or liability on the part of Magline, Inc. Magline does not
guarantee product capacity if alterations are made.
In 1947, Magline, Inc. introduced the
first lightweight Magliner hand trucks
to American businesses.
Today, our route delivery solutions
have expanded -- globally. You’ll find
Magline’s family of hand trucks, ramps,
and dock products in route delivery
operations all over the world.
People have trusted the Magline name
for more than half a century. For
performance, durability, and safety,
you’ll discover what millions of route
delivery professionals around the world
already know -- no other equipment
measures up to a Magliner.
Thank you for your purchase and
welcome to the Magliner family!