Magma MA KV 7009WIR User manual

Magma Automotive Molenheidseweg 10A 5451 HD Mill 0485-4713114 REV02
www.magmaautomotive.com
Type en drukfouten voorbehouden
MA KV 7009WIR Magma 7 inch monitor with wireless camera (2,4 GHz)
Package contents:
7 inch - 16:9 Monitor (1024x600 / 2,4GHz video input / Range 20..25M automotive application).
Dimensions : 180*121*28 mm
1x Mounting bracket monitor
1x Monitor sun visor
2x Antenna 2.4G for monitor and camera
2x Power cable for monitor and camera
2,4G Camera (1080x720 / 100° viewing angle / 12-32V) ) incl. mounting bracket, 1 pcs allen key and
mounting screws. Dimensions : 110*72*64 mm
1. 2.4G antenne
2. Power indicator
3. ON-OFF button
4. Guide lines ON-OFF
5. Button [+]
6. Button [Menu] monitor setting
7. Button [-]
8. Switch horizontal / vertical view
9. Camera ‘Pairing’
Magma Products –MA KV 7009WIR

Magma Automotive Molenheidseweg 10A 5451 HD Mill 0485-4713114 REV02
www.magmaautomotive.com
Type en drukfouten voorbehouden
1. Monitor
2. Camera
3. Camera ‘pairing’ button
4. Power connector camera DC 12 –32 V
5. Power connector monitor DC 12 –32 V
Power cable:
Red = 12 –32 V DC ignition controlled (+15)
Black = Ground
Settings [ MENU ]
Please use the buttons [MENU], [ + ] en [ - ] for changing the monitor settings.
You can make the following setting step by step : .
Pairing camera
Rotation view
Brightness screen
Contrast screen
Guidelines ON-OFF
Reset to factory default
Pairing monitor –camera How to (re)connect camera to monitor
Remark: only one 2.4G camera can be paired to this monitor !
To (re)connect the camera to the monitor, follow the below standing procedure.
1. Press button [ MODE ] to start the pairing procedure
2. Press the ‘Camera pairing button’ ( nr 3 in section : Connections) and keep this button pressed down
until you see the below standing ‘pop-up’ on screen with the check mark
3. The monitor and camera are ‘paired’