Magnavox AZ2805 User manual

MAGNAVOX
AZ2805 / A Z2808 CD Radio Cassette Recorder
Toll Free Help Line
Ligne d'assistance en service Iibre
Unea de ayuda telefonica sin cargo
800 - 5 3 1 * 0 0 3 9

Enqlish Controls......7-8 Remote control.10 General information. 18
^ Power supply.8 Radio.11-12 Troubleshooting.... 19
Loudspeakers...9 CD-player.12-14
Basic functions ... 9-10 Cassette recorder 15-17_
Francais Commandes.........23-25 Telecommande...27 Informationsgenerales
* Alimentation.25 Radio.......28 ...35
Haut-parleurs.26 Lecteur de CD ......29-31 Recherche de pannes....
Fonctions de base 2 7 Platine cassette ...32-34 .....36-37
Esoanol Controles......41-42 Mando a distancia,...44 Informacion general...52
” Tension de red 42 Radio.45-46 Soluciones a posibies
Altavoces. 43 Reproductor de CD ..4648 anomalias .5 3-54
Funciones basicas43-44 Magnetofono.49-51
Espanol
Frangais
English

English
SAFETY
WARNING @) Canada
To reduce the risk of fire or electric shock. This digital apparatus does not exceed the Class B
do not expose this appliance to rain or limits for radio noise emissions from digital apparatus
_^ moisture. as set out in the Radio Interference Regulations of the
CAUTI0N Canadian Department of Communications
Use of controls or adjustments or per¬
formance of procedures other than herein
may result in hazardous radiation exposure.
The set complies with the FCC-Rules, Part 15 and with
21CFR 1040.10
SAFETY INSTRUCTIONS - Read before operating equipment
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of
1. Read Instructions -All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions * The safety and operating instructions should
be retained for future reference
3. Heed Warnings * All warnings on the appliance and in the
operating instructions should be adhered to
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl kitchen sink,
laundry tub, in a wet basement or near a swimming pool etc.
6. Carts and Stands - The appliance should be used only with a cart
or stand that is recommended by the manufacturer
6A. An appliance and cart combination should be moved
with care Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn
7. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer
8. Ventilation - The appliance should be situated so that its location
or position does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, sofa, rug,
or similar surface that may block the ventilation openings, or, placed
in a built-m installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings
9. Heat * The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat
10. P ower Sources - The appliance should be connected to a power
supply only of the type descnbed in the operating instructions or as
marked on the appliance.
11. Grounding or Polarization -
The precautions that should be taken
so that the grounding or polarization
means of an appliance is not defeated
Caution: To prevent electric shock,
match tiie wide blade of tins p'ug to the Wide slot fully insert Do
not use this (polarized) plug with an extension cord, receptacle or
other o utiet unless the blades can be fully inserted to prevent b'ada
exposure.
12. Power-Cord Protection - Po.ver supply cords should be routed so
that they are not likely to be walked on or pinched by items p T aced
upon or against them, paying particular attention to cords and plugs,
convenience receptacles, and the pointwhere they exit from the
appliance
13. C leaning - The appliance should be cleaned only as recommended
by the manufacturer
14. Power Lines - An outdoor antenna should be located away from
power lines
15. Nonuse Periods - The power cord of the applrance should be
unplugged from the outlet when left unused for a long period of
time.
16.0bject and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into tie enclosure through
openings.
17. D amage Requiring Service - The appliance should be serviced by
qualified seivice personnel when.
A. The power-supply cord or the plug h3S been damaged, or
B. Objects have fallen, or liquid has spilled into the appliance, or
C. The appliance has been e>posed to ram, or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance, or
E. The appliance has been dropped, or the enclosure damaged
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions All other
servicing should be referred to qualified serv.ce personnel
4

LIMITED WARRANTY
WHAT IS COVERED? _
Warranty coverage begins the day you buy your product For
one year thereafter, a defective or inoperative product will be
replaced with a new, renewed or comparable product at no
charge to you. A replacement product is covered only for the
original warranty period. When the warranty on the original
product expires, the warranty on the replacement product also
expires.
WHAT IS EXCLUDED? _
Your warranty does not cover.
• labor charges for installation or setup of the product
adjustment of customer controls on the product and
installation or repair of antenna systems outside of the
product
• product repair and/or part replacement because of misuse, ac¬
cident unauthorized repair, or other cause not within the
control of Philips Consumer Electronics Company.
• reception problems caused by signal conditions or cable or an¬
tenna systems outside the unit
• a product that requires modification or adaptation to enable it
to operate in any country other than the country for which it
was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• incidental or consequential damages resulting from the
product (Some states do not allow the exclusion of incidental
or consequential damages, so the above exclusion may not
apply to you. This includes, but is not limited to, prerecorded
material, whether copyrighted or not copyrighted.!
WHERE IS EXCHANGE AVAILABLE? _
You may exchange the product in all countries where the
product is officially distributed by Philips Consumer Electronics
Company. In countries where Philips Consumer Electronics
Company does not distribute the product, the local Philips
service organization will attempt to provide a replacement
product (although there may be a delay if the appropriate
product not readily available).
BEFORE REQUESTING EXCHANGE _
Please check your owner's manual before requesting an
exchange. Adjustments of the controls discussed there may
save you a trip.
Philips Service Company
907 Snapps berry Road, Plant 2, Building 6
6reeneville,TN 37743
(In U.S A, Puerto Rico and U S. Virgin Islands, all implied
warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the
duration of this express warranty. But because some states do
not allow limitations on how long an implied warranty may last,
this limitation may not apply to you.)
EXCHANGING A PRODUCT IN CANADA _
Contact your dealer to arrange an exchange. Or. ship the
product insured and freight prepaid, and with proof of purchase
enclosed, to one of the Philips consumer service centers listed
below.
Philips Electronics Ltd.
601 Milner Avenue. Scarborough,
Ontario. M1B1M8-® [phone]
4977 Levy Street, St Laurent, (Montreal),
Quebec, H4R 2N9 - [phone]
3695 Grandview Highway, Vancouver,
B.C., V5M 2G7 - ® [phone]
(In Canada, this warranty is given in lieu of all other warranties.
No other warranties are expressed or implied, including any
implied warranties of merchantability or fitness for a particular
purpose. Philips is not liable under any circumstances for any
direct, indirect, special, incidental or consequential damages,
howsoever incurred, even if notified of the possibility of such
damages.)
TO GET OUT-OF-WARRANTY EXCHANGE _
In U.S A, Puerto Rico or U.S. Virgin islands, contact Philips
Service Company at ® [phone] to obtain the cost of
out-of-warranty exchange. Then carefully pack the product and
ship it to the Small Product Service Center (address listed
above).
In Canada, contact the nearest Philips consumer service center
(phone number and address listed above) to obtain the cost of
out-of-warranty exchange. Then carefully pack the product and
ship it to that service center.
MAGNAVOX PORTABLE COMPACT DISC
One Year Free Exchange
This product must be carried in for an exchange
WHO IS COVERED? _^_ EXCHANGING A PRODUCT IN U.SA f PUERTO RICO OR
You must have proof of purchase to exchange the product A U.S. VIRGIN ISLANDS _
sales receipt or other document showing that you purchased the Contact your dealer to arrange an exchange. Or, ship the
product is considered proof of purchase. Attach the receipt to product, insured and freight prepaid, and with proof of purchase
this owner's manual and keep both nearby. enclosed, to the address listed below.
Small Product Service Center
This warranty gives you specific legal rights.
You may have other rights which vary from state to state.
Philips Service Company
401 East Andrew Johnson Highway
Jefferson City, Tennessee 37760
Tt [phone]
EL4867E001 / MAC 4108 /12-84
5
English

MAGNAVOX
Smart.Very smart:
WARRANTY
REGISTRATION
CARD
Return your Warranty Registration Card today
to ensure you receive all the benefits you're entitled
Once your MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a
MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your
purchase at once. And take advantage of these important benefits
■ Warranty
Verification
Registering your product within
10 days confirms your right to
maximum protection under the
terms and conditions of your
MAGNAVOX warrant^'.
■ Owner
Confirmation
Your completed Warranty
Registration Card serves as
venficaton of ownership in the
event of product theft or loss.
■ Model
Registration
Returning your Warranty
Registration Card right away
guarantees you'll receive all the
information and special offers
which you qualify for as the
owner of your model
Know these safety symbols
A A
RISK OF ELECTRIC SHOO.
DONOTOftM
CAUTION: To reduce the ntk of electric shock, do not
remove cover lor back) No user-serviceable parts
inside Refer servicing to qualified service personnel
A This 'bolt of lightning' indicates
uninsulated material within your
unit may cause an electrical shock
For the safety of everyone in your
household, please do not remove
product covering
A The 'exclamation point' calls
attention to features for which you
should read the enclosed literature
closely to prevent operating and
maintenance problems
WARNING: To prevent fire or
shock hazard, do not expose
this equipment to rain or
moisture.
CAUTION: To prevent electric
shock, match wide blade of plug
to 'wide slot, and fully insert
For Customer Use
Enter below the Sena! No
which is located on the rear of
the cabinet. Retain this informa¬
tion for future reference
Model No. _
Sena! No._
MAGNAVOX
Smart.Very smart;
Congratulations on your purchase,
and welcome to the 'family'!
Dear MAGNAVOX product owner
Thank you for your confidence in MAGNAVOX. You've
selected one of the best-built, best-backed products available
today. And we'll do everything in our power to keep you happy
with your purchase for many years to come.
As a member of the MAGNAVOX 'family', you're entitled to
protection by one of the most comprehensive warranties and
outstanding service networks in the industry.
What's more, your purchase guarantees you'll receive all the
information and special offers for which you qualify, plus easy
access to accessories from our convenient home shopping
network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome and thanks for inves¬
ting in a MAGNAVOX product.
Sincerely,
Robert Minkhorst
President and Chief Executive Officer
P.S.Remember, to get the most from your MAGNAVOX
product, you must return your Warranty Registration
Card within 10 days. So please mail it to us right now!
6

CONTROLS
BASIC FUNCTIONS:
(?) CD«TAPE*TUNER - to select the sound source
( 2 ) POWER - to turn the set on and off
<D INCREDIBLE SURROUND SOUND - to create
a phenomenal surround sound effect (AZ 2808
only)
® DSC - DIGITAL SOUND CONTROL: to
increase the bass level or to enhance
the type of music you are listening to
DBB-JAZZ-POP
( 5 ) ft - 3.5 mm headphone jack
Note: Inserting the plug will disconnect the
speakers.
(6) MIC - 3.5 mm microphone jack
( 7 ) VOLUME A Y - to adjust the volume level
(?) REMOTE SENSOR - sensor for the infrared
remote control
@ HIGH SPEED DUBBING - Press to copy at high
speed
(§) RADIO:
PROGRAM - to program preset stations
TUNING]** ► «-to tune to radio stations
BAND - to select the wave band
(FW-MW-LW AM SW)
PRESET A ▼ - to select a preset station
© CD PLAYER:
OPEN-CLOSE - to open/close the CD tray
PLAY-PAUSE HI - to start and to interrupt CD
play
STOP ■ - to stop CD play and to erase a
program
SEARCH k* - to skip and to search
forwards and backwards
SHUFFLE - to play in random order
PROGRAM - to program track numbers and to
review the program
REPEAT - to repeat one track or the entire CD or
the program
©CASSETTE RECORDER:
RECORD • - to start recording (deck 1 only)
PLAY ► - t o start playback
SEARCH** »-to wind or rewind the tape
STOP-OPEN ■ A-to stop the tape and to
open the cassette holder
PAUSE II - t o interrupt the recording or
playback
V
7
English

English
CONTROLS POWER SUPPLY
Remote control
Remote control AZ 2805:
OPEN...to open/close the CD tray
HI.....to start and to interrupt CD play
M ► !.- CD Mode:Xo select the beginning of the
current/previous or a subsequent track
- TUNER Mode: to select a preset station
■ . to stop CD play
VOLUME T A. . ...to increase or decrease the volume level
Batteries
Set (R20 r UM1 or D-cells):
• Open the battery compartment of the set and insert six batteries,
type R20, UM1 or D-cells (preferably alkaline).
Remote control (R06, UM3 or AA-cells):
• Open the battery compartment of the remote control and insert
two batteries, type R06, UM3 or AA-cells (preferably alkaline).
• Remove the batteries if they are empty or the set is not to be
used for a long time.
AH kinds of batteries contain chemical substances
therefor they should be disposed of properly.
Mains
1 Check if the mains voltage as shown on the type plate
corresponds to your local mains voltage. If it does not, consult
your dealer or service organisation. The type plate is located
at the base of the set.
If the set is equipped with a VOLTAGE selector®, set this
selector to the local mains voltage.
2 Connect the mains cable to the AC MAINS inlet and the wall
socket. The AC power supply is switched on. The mains cable
is inside the battery compartement
The battery supply is switched off when the set is connected to the
mains. To change over to battery supply, pull out the plug from the
unit's AC MAINS socket.
To disconnect the set from the mains completely, withdraw the
mains plug from the wall outlet.
8

LOUDSPEAKERS
BASIC FUNCTIONS
Removable speakers
Connecting the speakers
Connect the right speaker to the R jack and the left speaker to
the L jack.
Note: Speakers other than supplied can be used.
They have to be 4 Ohms for type AZ2805 and 8 Ohms for
type AZ2808.
Taking off the speakers
Keep the lever (on the back of the speakers) pressed and slide
the speaker upwards.
Attaching the speakers
Slide the speakers from above in the sleeves on the sides
of the set cabinet. The speakers will click into position.
FRONT FRONT
RIGHT LEFT
r
Switching on and off/standby
Push the POWER button.
- ► The display lights up (only if the set is connected to the AC
power supply).
The set is switched off when the POWER button is released.
When the set is switched off the last source selected will be
remembered, as well as the sound settings, the tuner presets and
the volume level.
In order to switch off the power supply, remove the mains plug.
Note: If the set runs on batteries , always be sure to set the POWER
button in position OFF after use. This will avoid unnecessary
power consumption.
9
English

English
BASIC FUNCTIONS
REMOTE CONTROL
Adjusting volume and sound
Adjust the volume using the controls VOLUME ▼ A.
- ► Display indication: Volume level from 0 to 32.
Adjust the sound to your taste by pressing the button DSC several
times.
- ► A light indicates either DBB-JAZZ-POP.
Create a phenomenal surround sound effect by pressing
INCREDIBLE SURROUND SOUND (AZ 2808 only).
- ► The INCREDIBLE SURROUND SOUND button lights up.
The effect of incredible surround sound may vary with different
types of music and can be improved by leaving the speakers
attached to the set.
The bass frequencies can also be emphasised if you place the set
against a wall or on a bookshelf. (Do not cover any vents and
leave sufficent room around the unit for ventilation.
Remote control
CD...to select CD functions
TUNER.....to select tuner functions
Digits 0-9.....CD: to key in a track number
TUNER: to key in a preset station
► II.to start and to interrupt CD playback
SHUFFLE....to play a CD in random order
H W........CD: to select the beginning of the
current/previous or a subsequent track
TUNER: to select a radio preset station
■ . . . to stop CD playback
OPEN...to open/close the CD tray
VOLUME T A.....to decrease or increase the volume level
Note: The DISC UP button on the remote control has no
corresponding function on this set
Notes: - Always select the desired sound source first and then
press the required function key.
- Numbers consisting of two figures must be keyed in
within 2 seconds.
10

RADIO
Tuning to radio stations
1 Select the tuner by pressing the CD •TAPE*TUNER button
several times until EEsa appears on the display.
2 Select the wave band by using the BAND selector.
- ► Display indication: the selected waveband
3 Press TUNING m or w for approx, one second and then release
the button.
- ► The radio automatically tunes to a station with sufficent
strength. Display indication during automatic tuning: Srch
4 Repeat this procedure until you find a desired station.
To tune to a weak transmitter briefly press TUNING m or as
often as necessary for optimum reception, or until the correct
frequency is indicated in the display.
Improving the RADIO reception
• For FM and SW, pull out the telescopic antenna. To improve the
signal, incline and turn the antenna. Reduce its length if the
signal is too strong (very close to a transmitter).
• For AM, MW and LW, direct the built-in antenna by turning the
whole set. The telescopic antenna is not needed.
Switchable tuning grid (not all versions) _
In North and South America the frequency step between adjecent
channels in the AM band is 10 kHz. In the rest of the world this
step is 9 kHz. Usually this frequency step has been preset in the
factory of your area. (/01 versions only)
In some versions the frequency step can be changed:
• Keep the BAND selector button pressed for more than 5
seconds.
- ► The display shows either 10 Or Id or 9 Or Id.
Programming radio stations (29 preset stations)
You can store up to 29 radio stations in the memory. When tuning
to a preset station, the preset number (1 to 29) is indicated in the
display.
1 Select the tuner by pressing the CD *TAPE*TUNER button
several times until EEsa appears on the display.
2 Tune to a desired station with TUNING w< or as described
earlier.
- ► If the frequency is already stored in the memory, the preset
number will be displayed.
11
English