Magnavox A1 8030 User manual

MAGNAVOX
A1 8030 /AZ 8035 CD Soundmachine

INDEX
The Model and Serial Number will be
found on the type plate on the base
of the set. Please record in the
space provided below.
English
Illustrations
Limited Warranty
page 4
page 3
page 12
Les numeros de modeie et de serie
figurent au-dessous de Pappareil.
Veuillez les noter ci-apres, dans
Pespace prevu a cet effet.
Frangais
Illustrations
Garantie Limit6e
page 13 •§
O'
page 3 §
page 21 u -
f
El numero de modelo y el de serie
figuran en la placa de tipo en la base
Espanol pagina 22
o
ra
del aparato. Anotelos en el espacio a
llustraciones
pagina 3
CL
w
este fin reservado mas abajo.
^ .
Garantia Limitada
pagina 30
111
Model number:
Numero de modeie:
Numero de modelo:
Serial number:
Numero de serie:
Numero de serie:
2

Please follow these three important steps
to get the most from your product
Return your owner's
registration card within 10 days
MAIL
Registering your purchase is an essential
step to guarantee that you'll receive all of
the benefits you’re entitled to as a
Magnavox product owner
Complete and mail your Owner's Registra¬
tion Card today to ensure your right to war¬
ranty verification, owner confirmation, model
registration, plus a wide variety of special
services and savings.
Know these safety symbols
//\ ^ Sofel^Ssh3 / ! \
* 1 | DO NOT OPEN I * 1
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
A This bolt of lightning indicates uninsulat¬
ed material within your unit may cause
an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.
A This exclamation point calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
Read operating instructions
carefully
I ' NST *"cr^l
The information in this manual can help you
take full advantage of your product's many
features, and ensure years of safe, reliable
operation. So don’t miss out. Read the
enclosed instructions, safety tips and war¬
ranty information today.
MAGNAVOX
Congratulations on your new purchase ...
and welcome to the Magnavox family!
Dear Magnavox family member;
Thank you for your confidence in Magnavox.
You’ve selected one of the best-built, best-backed
products available today.
We appreciate your support, and we’ll do every¬
thing we can do to keep you happy with your pur¬
chase for many years to come. After all, you’re
the reason we’re in business!
As a Magnavox family member, you’re entitled to
a world of special privileges - and our uncompro¬
mising commitment to your total satisfaction.
Your Magnavox product is protected by one of
the most comprehensive warranties and out¬
standing service networks in the industry.
What’s more, your purchase qualifies you to
receive advance information on exciting new
products from Magnavox, convenient access to
our home shopping network for special products
and accessories, plus factory-direct rebates and
discounts on your future Magnavox purchases.
All of this is our way of saying ’thanks' for joining
the Magnavox family.
To start taking advantage of these great benefits,
just remember to return your Magnavox Owner's
Registration Card.
Simply complete, detach and mail us your
Owner’s Registration Card today. And enjoy your
new purchase with our best wishes!
Sincerely,
Donald F. Johnstone
President and Chief Executive Officer
For Customer Use:
Enter below the Serial No. which is located on
the type plate on the base of the cabinet.
Retain this information for future reference.
Model No. AZ 8030/8035 _
Serial No._

SAFETY
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the userthat uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock.
Therefore, it is dangerous to make any kind
of contact with any inside part of this unit
A This symbol alerts the userthat important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in order
to avoid any problems.
WARNING
To reduce the risk of fire or electric shock,
do not expose this appliance to rain or mois¬
ture.
CAUTION
Use of controls or adjustments or per¬
formance of procedures other than herein
may result in hazardous radiation exposure.
The set complies with the FCC-Rules, Part 15 and with
21CFR 1040.10.
(cdn) Canada
This digital apparatus does not exceed the Class B
Omits for radio noise emissions from digital apparatus
as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
v.
SAFETY INSTRUCTIONS - Read before operating equipment
This product was designed and manufactured to meet strict quality and
safety standards. There are. however, some installation and operation
precautions which you should be particularly aware of.
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operaring instructions should
be retained for future reference.
3. Heed Warnings ■ All warnings on the appliance and in the operat¬
ing instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near wa¬
ter - for example, near a bathtub, washbowl, kitchen sink. laundry
tub. in a wet basement or near a swimming pool. etc.
6. Carts and Stands- The appliance should be used only with a cart
or stand that is recommended by the manufacturer.
6A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
IQtf surfaces may cause the appliance and cart combina-
tion to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location
or position does not interfere with its proper ventilation. For exam¬
ple, the appliance should not be situated on a bed, sofa, rug, or sim¬
ilar surface that may block the ventilation openings; or, placed in a
built-in installation, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (includ¬
ing amplifiers) that produce heat
10. Power Sources - The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
11.Grounding or Polarization -
The precautions that should be taken
so that the grounding or polarization
means of an appliance is not defeated.
Caution: To prevent electric shock,
match the wide blade of this plug to the wide slot, fully insert Do
not use this (polarized) plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted to prevent blade
exposure.
IZPower-Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the ap¬
pliance.
13. C leaning -The appliance should be cleaned only as recommended
by the manufacturer.
14. Power lines - An outdoor antenna should be located away from
power lines.
15. N onuse Periods - The power cord of the appliance should be un¬
plugged from the outlet when left unused for a long period of time.
16. Object and liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through open¬
ings.
17. D amage Requiring Service -The appliance should be serviced by
qualified service personnel when:
A The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid lias spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does notappear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other servic¬
ing should be referred to qualified service personnel.
92/8 EL 4562-1
5
English

English
CONTROLS
For the illustrations, keep page 3 open
TOP AND FRONT PANEL - Fig. 1
CASSETTE DECK keyboard:
• RECORD
► PLAY
◄◄ REWIND - fast rewind
► > F. FWD - fast forward wind
■ STOP/EJECT
II PAUSE
OPEN/CLOSE - to open and close the CD cover
CD PLAYER keyboard and display:
► - PLAY and PAUSE button
■ - STOP button (press again to erase the
memory)
m PREVIOUS/NEXT w:
in position playback or STOP, press briefly to
jump to a previous w« or next track.
m SEARCH nh:
during playback, keep pressed to search fast
backward m or forward
INTROSCAN
to play only the beginning of each track.
MODE
press repeatedly until the required function
appears in the display.
“ SHUFFLE play all tracks in a random
order
- SHUFFLE REPEAT continuously repeat
the CD in the SHUFFLE mode.
- REPEAT ALL (MEMORY) continuously
repeat the CD (or the stored selection —
MEMORY)
- REPEAT 1 continuously repeat 1 title (the
displayed track)
MEMORY
to store the displayed track number in the
memory (press for longer than 1 second to
display all stored track numbers)
CD display, shows:
no diSC - no CD inserted
TRACK - the total number of tracks, and
during play the number of the track being
played.
TIME-the total playing time of the CD, and
during play the elapsed time of that track
REPEAT (ALL or 1) activated
SHUFFLE activated
MEMORY-the stored selection (memory)
is played
SCAN (INTROSCAN) activated
PAUSE activated
VOLUME control
DYNAMIC BASS BOOST - bass button, press
to boost the bass response
HEADPHONES - stereo headphone socket
MODE SELECTOR- t o select the sound source
TAPE-RADIO-CD
BAND selector
TUNING knob - for frequency tuning
BACK PANEL - Fig. 3_
MAINS socket for mains lead.
VOLTAGE selector (not on all versions)
The type plate is located on the base of the set
SUPPLY
Batteries
Whenever convenient, use AC mains supply if
you want to conserve battery life.
• Open the battery compartment (Fig. 2).
• Insert as indicated eight (preferably alkaline)
batteries, type R20, UM1 or D-cells (Fig. 2).
Note: Instead of normal batteries, you can also
insert ' Gates' rechargeable power sticks , 2 x
size 4D (or 4x size 2D). They require no separate
recharger but are recharged automatically in
this set whenever connected to a wall outlet
Use only 'Gates 1 power sticks. Normal recharge¬
able D-cells are not recharged in this set
• The battery supply is switched off when the
set is connected to the mains. When chang¬
ing over to battery supply, pull out the plug
from the MAINS socket (Fig. 3).
• Remove the batteries if exhausted or if they
will not be used again for a long period.
6

CONTROLS
RADIO
CONNECTIONS
Stereo headphone socket HEADPHONES
For stereo headphones with 3.5 mm plug. In¬
serting the plug will disconnect the loudspeak¬
ers.
• Check if the mains voltage as shown on the
type plate corresponds to your local mains
supply. If it does not, consult your dealer or
service organisation.
If the set is equipped with a VOLTAGE selec¬
tor (Fig. 3), set this selector to the local mains
voltage.
RADIO RECEPTION
• Set the MODE selector to RADIO.
• Adjust the sound with the VOLUME control
and the DYNAMIC BASS BOOST bass but¬
ton.
• Select the wave band using the BAND selec¬
tor
(LW not on all versions).
- For FM, pull out the telescopic aerial. To
improve FM-reception, incline and turn the
aerial. Reduce its length if the FM-signal is
too strong (too close to a transmitter).
- For AM/MW and LW (Medium and Long
Wave), the set is provided with a built-in
aerial, so there is no need to use the tel¬
escopic aerial. The aerial can be directed by
turning the whole set.
• Tune to a radio station using the TUNING
knob.
• When receiving a FM-stereo transmission a
disturbing noise may be heard due to a weak
FM-stereo signal. This can be suppressed by
setting the BAND selector to FM MONO.
You will then hear (and record) the FM pro¬
gramme in mono.
• The set is switched off if the MODE selector
is in the TAPE OFF and the recorder buttons
are released.
7
Espanol
Frangals
English

English
COMPACT DISC
PLAYING A DISC
• Set the MODE selector to CD.
• Press OPEN/CLOSE to open the CD cover.
• Insert the CD, printed side facing up (Fig. 4).
• Close the cover. The CD-player starts and
scans the contents list of the CD. After that,
the total playing time and the number of
tracks appear on the display and the CD-
player stops.
• Playback will start by pressing PLAY.
As soon as playback starts, the display shows
the track number and the elapsed playing
time of that title.
• Adjust the sound with the VOLUME control
and the DYNAMIC BASS BOOST bass but¬
ton.
• For brief interruptions, press PAUSE. The
word PAUSE then appears. To continue play¬
back, press PAUSE again.
• To stop playback, press STOP ■ .
The CD player also goes to the STOP posi¬
tion:
- by pressing OPEN/CLOSE;
- when the end of the CD is reached;
- if you move the MODE selector;
- if the batteries run down or if the power
supply is interrupted in any other way.
• To take out the CD, open the CD cover by
pressing OPEN/CLOSE. Open the CD cover
only if the CD-player is in the STOP position.
• The set is switched off if the MODE selector
is in the TAPE OFF position and the recorder
buttons are released.
Remarks
- If the battery voltage is not sufficient for
playing a CD, the CD-player will not start.
- If^o o' ISC appears after inserting a CD, the
player cannot read the CD. Possible causes
are:
- you inserted the CD the wrong way: the label
should face up (Fig. 4);
- the CD is badly scratched or dirty, see 'Main¬
tenance';
- The lens® (Fig. 5) is steamed up because of
a sudden transition from a cold into a warm
environment; do not clean the lens, but let
the set acclimatize for a while.
INTROSCAN
The INTROSCAN function can be switched on
from the STOP and PLAY mode.
• Press INTROSCAN. The word SCAN then
appears. Only the first few seconds of each
track are played.
• The moment you press PLAY, the
INTROSCAN function is defeated (the word
SCAN disappears) and the CD is played in the
normal way from this title.
• If you press m or »r, the INTROSCAN func¬
tion remains operative and the beginning of
the next or previous m track is played.
• If INTROSCAN is not defeated by pressing
PLAY or STOP*, the CD player returns to
STOP as soon as the end of the CD is
reached.
MODE (SHUFFLE and REPEAT)
By pressing the MODE button several times, all
play modes will successively appear on the
display:
1 xSHUFFLE to play the CD in a random order;
2 xSHUFFLE REPEAT to repeat the CD continu¬
ously in a random order;
3 x REPEAT ALL to repeat the CD continuously;
4 x REPEAT 1 to repeat the current title continu¬
ously;
5 xNORMAL (no display indication) to cancel
the SHUFFLE and REPEAT modes.
In the MEMORY REPEAT ALL mode (if the
word MEMORY is also visible on the display)
only the titles stored in the memory will be
played.
The mode MEMORY SHUFFLE is not possible.
The word MEMORY will disappear when the
next title is reached.
To cancel the REPEAT and SHUFFLE modes,
choose NORMAL mode (no display indication).

COMPACT DISC
wPREVIOUS/NEXTVw wSEARCHw
1. M4 PREVIOUS/NEXT**
Press briefly (less than 1 second)
a. During PLAY and INTROSCAN:
► w - go to the next track (title)
You can jump to the next title by pressing
once.
If you want to skip more than one track, then
press more than once until the display
shows the desired track number,
m - go to the previous track (title)
If you want to repeat the running title from
the beginning, press m once.
If you want to repeat one of the previous
titles, press m more than once until the
display shows the required track number.
b. In position STOP:
In position STOP with a CD inserted you can
select the desired title using m and until
the display shows the required track number.
2. m SEARCH
During playback, keep for search forward
orm for search backward pressed. The CD
is played partly and at high speed. However,
the sound is still recognizable.
Release the button as soon as you recognize
the required passage: the CD will be played
in the normal way from this passage.
If the button is pressed longer than 10 sec¬
onds, the search speed increases.
PROGRAMMING TRACK NUMBERS
You may select a number of tracks and store
these in the memory in the desired sequence.
When playing, you will only hearthe stored titles
in the selected sequence. At most, 20 tracks
can be stored in the memory. You may store
each track more than once.
Manual selection
• Select the desired track using the buttons m
and until the display shows the required
track number.
• Store this track by pressing MEMORY.
• Select and store in this way all desired titles.
Storing during INTROSCAN
• Press INTROSCAN to play the first few sec¬
onds of each track.
• Press MEMORY as soon as you recognize a
desired title.
Storing during PLAY
• During normal PLAY you may store the run¬
ning title by pressing MEMORY.
- After pressing MEMORY the character P
(PROGRAM) appears, indicating that the track
has been stored.
- Store all desired titles in the required se¬
quence. You may store each track more than
once.
- At most, 20 tracks can be stored in the
memory. When the memory is full, the char¬
acter/ 7 (FULL) appears.
- When pressing MEMORY for longer than 1
second, the display will show in sequence all
stored track numbers.
- You can simply erase the whole memory by
pressing STOP* for a second time: the
character C for CLEAR appears now.
The contents of the memory are also erased:
- by opening the CD cover using OPEN/CLOSE;
- If you move the MODE selector;
- if the batteries get exhausted or if the power
supply is interrupted in any other way.
How to play the stored selection
To play your selection, the CD-player should be
in the STOP position; then press PLAY : now,
the word MEMORY appears.
English

English
CASSETTE
RECORDING
Preparation
• Press EJECT ■ to open the cassette holder.
• Insert the cassette (Fig. 7).
For recording you must use a cassette on which
the tabs (Fig. 8) are not broken.
At the very beginning of the tape, no recording
will take place during the first 7 seconds when
the leader tape passes the recorder heads.
• When monitoring during recording, adjust
the sound with the VOLUME control and the
DYNAMIC BASS BOOSTbass button. These
controls do not affect the recording.
Recording from the CD-player
• Set the MODE selector to CD. It is not
necessary to start the CD-player separately.
If you press RECORD •, the CD-player starts
automatically.
- if the CD-player is in the STOP position,
recording will start from the beginning of the
CD (or from the beginning of the program¬
ming selection);
- if the CD-player is in the PAUSE position,
recording will start from this very position;
- in the INTROSCAN position, the CD-player
will first return to the beginning of that track
and then recording will start.
Recording from the radio
• Set the MODE selector to RADIO.
• Tune to the desired radio station.
• In case of FM radio recordings, setthe BAND
selector to MONO or STEREO.
Starting and stopping the recording
• Start recording by pressing RECORD •; in
doing so, PLAY ► is pressed too.
• For brief interruptions, press PAUSE li. To
restart recording, press this button once
more.
• To stop recording, press STOP ■ . On press¬
ing again, the cassette holder will open.
• The set is switched off if the MODE selector
is in the TAPE OFF position and the recorder
buttons are released.
COPYRIGHT
Recording is permissible insofar as copyright or
other rights of third parties are not infringed.
FAST WINDING
Press « or To stop fast winding, press
STOP ■ .
SAFEGUARDING AGAINST ERASURE
Keep the cassette side to be safeguarded in
front of you (Fig. 8) and break out the left tab.
Now, recording on this side is no longer possi¬
ble.
You can render this safeguard ineffective by
covering the aperture with a piece of adhesive
tape.
CASSETTE PLAYBACK
• Set the MODE selector to TAPE.
• Adjust the sound with the VOLUME control
and the DYNAMIC BASS BOOST bass but¬
ton.
• Press EJECT ■ and insert a recorded cas¬
sette (Fig. 7).
• Fast winding and rewinding: Press ◄◄ or
To stop, press STOP ■ .
• Press PLAY ► and playback will start.
• To stop playback, press STOP ■ . The set is
then switched off.
When the end of the tape is reached, the re¬
corder buttons are released.
10

MAINTENANCE
MAINTENANCE
CD-p!ayer
- The lens ® (Fig. 5) should never be touched
or cleaned.
- The lens may steam up when the set is taken
from a cold into a warm environment. Play¬
ing a CD is not possible then. Do not clean
the lens, but let the set acclimatize for a
while.
- Always pick up the CD by the edge and put
it back in its box immediately after use.
- To clean, breathe on the CD and wipe it off in
a straight line from centre to edge (Fig. 6)
using a soft, lint-free cloth. Cleaning agents
may harm the CD.
Cassette deck
To ensure a good recording and playback qual¬
ity, clean the parts ®@©@ indicated in Fig. 9
after every 50 hours of operation or, on average,
once a month.
• Open the cassette holder by pressing
EJECT*.
• Use a cotton bud slightly moistened with
alcohol or a special head cleaning fluid.
• Press PLAY^ and clean the rubber pressure
roller© (Fig. 9}.
• Then press PAUSEll and clean the magnetic
heads ®® and the capstan ©.
• After cleaning, press STOP *.
Cleaning of the magnetic heads ®® can also
be done by playing a cleaning cassette through
once as an ordinary cassette.
Remarks
- The CD-player and the cassette decks are
fitted with self-lubricating bearings which
must not be oiled or greased.
- Fingerprints, dust and dirt on the apparatus
can be removed using a soft, clean and
slightly damp leather cloth. Do not use any
cleaning agents, since they may affect and
harm the cabinet.
- Keep the set, batteries, CDs and cassettes
away from rain, moisture, sand and exces¬
sive heat, e.g. near heating equipment or in
cars parked in the sun.
This product complies with the radio interfer¬
ence requirements of the European Commu¬
nity.
11
English

LIMITED WARRANTY
Magnavox Portable Compact Disc
_ - One Year Carry-ln Exchange - _
One Year Coverage
For one year from the date of purchase, your Portable Compact Disc will be replaced with a new, renewed or comparable product
(whichever is deemed necessary) if it becomes defective or inoperative. This is done without charge to you. Replacement prod¬
ucts are warranted for the balance of the warranty period.
Who is Protected? ... Where?
This warranty is extended to the original retail purchaser for products purchased and used in the U.SA, Puerto Rico, the Virgin Is¬
lands and Canada.
What the Purchaser Must Do
Before you call for service, check your operating instruction booklet. A slight adjustment of the customer controls discussed in
your instruction booklet may save you a service call.
This warranty does not cover commercial use, rental agreements, shipping damage, misuse or failure due to lack of normal care.
For product purchased in the U.S.A., Puerto Rico
or the Virgin Islands
If you require service during the warranty period, you must
take your portable product to the dealer from whom it was
purchased, or carefully pack the product and ship it by prepaid
transportation with proof of the purchase date to the Small
Product Service Center*, address listed below.
In the U.SA., Puerto Rico or the Virgin Islands, all implied war¬
ranties including implied warranties of merchantability and fit¬
ness for a particular purpose, are limited in duration to the du¬
ration of this express warranty. Some states do not allow limi¬
tations on how long an implied warranty lasts, so the above
limitation may not apply to you.
This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
For product purchased in Canada
Replacement product can be arranged through your dealer
who will advise of the nearest repair centre. To obtain warranty
service, the product must be delivered (camed-m) to a Philips
Consumer Service Centre (listed below), Philips Self-Servicing
Dealer or Authorized Service Depot.
All that's required to validate your original factory warranty for
products you purchase is to present your bill of sale as proof of
purchase.
In Canada, this warranty applies only to the normal service
area of a Philips Consumer Service Centre, Philips Self-Servic¬
ing Dealer or Authorized Service Depot. Beyond this area, trav¬
el time or expense is the owner's responsibility.
How To Get Service On Your Portable Product After The One Year Warranty Expires
Out-of-warranty service can be obtained at a nominal cost for replacement and handling under the following arrangements:
For product purchased in the U.S.A., Puerto Rico or
the Virgin Islands
1. Contact the Philips Service Company office {ft 615/475-
8869) to obtain the cost of out-of-warranty repair for your
product. Please know your model number before you call.
2. Pack your product securely in a suitable container for ship¬
ment.
3. Mail the product to:
•Small Product Service Center
Philips Service Company
907 Snapps Ferry Road, Plant 2, Building 6
Greeneville, Tennessee TN 37743
ft (615) 636 - 5740
For product purchased in Canada
1. Call the nearest Canadian Philips Consumer Service Centre
(listed below) to obtain the cost of out-of-warranty repair for |
your product. Please know your model number before you
call.
2. Pack your product securely in a suitable container for ship¬
ment.
3. Mail the product to the nearest Canadian Philips Service
Centre (listed below).
Canadian Philips Consumer Service Centres
Toronto
Montreal Vancouver
601 Milner Avenue
5930 C6te de Liesse 3695 Grandview Highway
Scarborough, Ontario Montreal, Quebec
Vancouver. B.C.
M1B1M8
H4T1E1
V5M 2G7
ft [phone] or 292-5161
tf(514) 342-9180
ft (604) 4354411
Fax ft [phone]
Fax ft [phone]
Fax ft [phone]
When your product is received, it will be replaced by a renewed (or comparable) product which meets Philips' high quality stan¬
dards and shipped back to you by prepaid transportation.
EL 4546-2
92/11

32

33

AZ 8030
AZ 8035
Philips Consumer Electronics Company
A Division of North American Philips Corporation
Printed in Malaysia
3139 116 14382