MAHLE CAD-DPF1 User manual

MAHLE CAD-DPF1
EN
Operation Manual
1-Box DPF Adapter

en |2|CAD-DPF1
EVERY PERSON WHO OPERATES THIS
EQUIPMENT NEEDS TO KNOW AND
UNDERSTAND ALL OF THE INFORMATION IN
THIS MANUAL – FAILURE TO DO SO COULD
RESULT IN SERIOUS INJURY OR DEATH.
READ THIS MANUAL
CAREFULLY AND
RETAIN FOR YOUR
RECORDS

CAD-DPF1 | 3|en
Contents
1. Safety Regulations ..................................................4
1.1 Warnings......................................................4
2. Foreword..................................................................5
2.1 From the manufacturer.................................5
3. Symbols Use............................................................5
3.1 Signal words................................................5
4. Responsibilities .......................................................6
4.1 Receiving Inspection....................................6
4.2 Owner and/or operator responsibilities.........6
5. Operation.................................................................7
5.1 Handling a DPF using the DPF Adapter ........7
5.2 WARNING ...................................................7
6. No tes........................................................................8

en
|4|CAD-DPF1
1. Safety Regulations
1.1 Warnings
Read and understand all of the instructions and warnings
on the on-product labeling and in the owner’s manuals of
the jack and the adapter before using the adapter.
Do not exceed the capacity of the adapter.
Use adapter only for its intended purpose.
Handle the DPF with care. Do not allow it to
experience impact or excessive force.

CAD-DPF1 | 5|en
2. Foreword
2.1 From the manufacturer
Thank you for your purchase. To complement the offering
of A/C, fluid and nitrogen service equipment, MAHLE
Service Solutions has partnered with GrayManufacturing
to provide the highest quality hydraulic and pneumatic
equipment available for the professional service
technician. This equipment adheres to high standards
promised in the MAHLE guarantee including the
assuranceofinnovation and reliability that comeswith the
Gray Manufacturing name. Please contact MAHLE
Service Solutions’ customer service at [phone] or
[e-mail] with any comments or
questions.
3. Symbols Use
3.1 Signal words
Signal words call attention to a safety message or
messages, or a property damage message or messages,
and designate a degree or level of hazard seriousness.
Signal words used in this manual include:
Keyword Probability of
occurrence
Severity of danger if
instructions not observed
DANGER
Immediate
impending danger
Death or severe injury.
WARNING
Possible impending
danger
Death or severe injury
CAUTION
Possible dangerous
situation
Minor injury
NOTICE
Possible damage to
property
Possible property
damage

en
|6|CAD-DPF1
4. Responsibilities
4.1 Receiving Inspection
Before attempting to operate this equipment, thoroughly
read and understand this manual. Completely remove all
tape and packaging. Inspect the equipment immediately
upon delivery. If shipping damage is evident, inform the
delivering carrier immediately and contact the
manufacturer using the contact information on the back
cover of this manual.
4.2 Owner and/or operator responsibilities
The owner of this equipment must read these instructions
and maintain them for future reference and for instructing
any other users of the equipment. The owner is
responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and
literature are available from the manufacturer. The owner
must never authorize or allow anyone to use this
equipmentuntil the operator hasreadandunderstoodthe
information in this manual and on the accompanying
labeling on the equipment itself.
If this equipment is being used in an occupational setting
(or workplace), the employer should ensure that all
personnel working with and around the equipment know
of the risks associated with its use. Personnel involved in
the use and operation of this equipment shall be careful,
competent, trained, and qualified in the safe operation of
the equipment and its proper use when servicing motor
vehicles and their components. Safety information
provided with this equipment should be emphasized by
the employer and understood by each employee. The
employer mustmake thismanualavailable toallpersonnel
using this equipment and all personnel must read and
understand the contents of this manual. If the operator is
not fluent in English, the manufacturer’s instructions and
warnings shallbe readto and discussedwith the operator
in the operator’snative language bythe employer,making
sure that the operator comprehends its contents and
observesthe proper procedures for use ofthis equipment.

CAD-DPF1 | 7|en
5. Operation
5.1 Handling a DPF using the DPF Adapter
1. Remove the adjustable bracketsfromthe jack’slift
platform.
2. Use the 1/2-13 nuts to secure the adapter to the
jack’s lift platform.
3. Slowly raise the adapter to the DPF takingcare not
to crush the DPF.
4. Ensure the DPF is centered on the adapter.
5. Disconnect DPF from vehicle and allow it to rest
on the adapter.
6. Strap the DPF to the adapter to prevent it from
falling or shifting.
7. Lower the DPF and remove the jack from under
the vehicle.
8. After work has been completed, reverse steps to
reinstall DPF.
5.2
WARNING
1. Readandunderstandallinstructionsandwarnings
on the on-product labeling and in the owner’s
manuals of the jack and the adapter before using
the adapter.
2. Do not exceed the capacity of the adapter.
3. Use adapter only for its intended purpose.
4. Handle the DPF with care. Do not allow it to
experience impact or excessive force.

en
|8|CAD-DPF1
6. Notes

CAD-DPF1 |9|en

en |10 |TSL-50
MAHLE Aftermarket Inc.
916
A West State Street,
St. Johns, MI 48879
Phone: (800) 468
-2321
Fax: (717) 755
-8304
E
-mail: [e-mail]
www.servicesolutions.mahle.com
670-90864_A