Manual Thinking MT-WT L99-D User manual

Manual Thinking®
EN Assembly instructions for Work Tables and Visualization Panels
ES Instrucciones de montaje para Mesas de Trabajo y Paneles de Visualización
CA Instruccions de muntatge per a Taules de Treball i Panells de Visualizació

Manual Thinking®
2
EN Assembly instructions
Attention!
Follow the instructions carefully, placing special
attention to the configuration of legs, screws and
wheels with and without breaks, to make sure to
avoid any instable assembly.
The assembly of the work tables and panels has to
be realized with at least 2 persons. When placing
the panels on the floor during the assembly, use
a protective rug or cardboard to prevent the panel
from damages.
ES Instrucciones ensamblaje
¡Atención!
Sigue las instrucciones de montaje con precisión,
prestando especial atención al posicionamiento
de las patas, los tornillos y las ruedas con y sin
frenos, para evitar cualquier montaje indebido.
El montaje se tiene que realizar con al menos 2
personas. Al colocar los paneles en el suelo
durante el montaje, utilice una alfombra o un
cartón de protección para evitar que el panel se
dañe.
CA Instruccions montatge
Atenció!
Segueix les instruccions de muntatge amb precisió,
fent especial atenció al posicionament de les potes,
els cargols i les rodes amb i sense frens, per evitar
qualsevol muntatge indegut.
El muntatge s’ha de realitzar amb al menys a 2 per-
sones. Quan col.loqueu els taulers al terra durant el
muntatge, utilitzeu una catifa o cartolina de protec-
ció per evitar danys al tauler.

Manual Thinking®
3
EN Use & warranty
The workspace furniture comes with a warranty
for 2 years, excluding any undue uses.
Save a receipt or invoice for proof of date.
Maximum charge tables and panels: 100 kg
Maximum charge benches: 400 kg
Maximum charge stools: 100 kg
Indoor use only.
Do not stand or sit on the tables or panels.
Assemble only as indicated in instructions.
Follow maintenance and cleaning instructions.
ES Uso & garantía
La gama de mobiliario tiene una garantía de
2 años, excluyendo cualquier uso indebido.
Guarde un recibo o factura como prueba de la fecha.
Carga máxima mesas y paneles: 100 kg
Carga máxima bancos: 400 kg
Carga máxima taburetes: 100 kg
Solamente para uso en interiores.
No subir ni sentar sobre las mesas o paneles.
Monta los muebles únicamente como indicado en
las instrucciones.
Siga las instrucciones de mantenimiento y limpieza.
CA Us & garantía
La gamma de mobiliari té una garantia de
2 anys, excloent qualsevol ús indegut.
Guarda un rebut o factura com a prova de la data.
Càrrega màxima taules i panells: 100 kg
Càrrega màxima bancs: 400 kg
Càrrega màxima tamborets: 100 kg
Només per a ús en interiors.
No pujar ni asseure sobre les taules o panells.
Munta els mobles únicament com indicat en les
instruccions.
Seguiu les instruccions de manteniment i neteja.

Manual Thinking®
4
EN Maintenance and Cleaning
Instructions
Surfaces with PerfectSense covering:
Clean the surface using a humid cotton cloth.
Clean only using water. In case of resistant dirt,
use water with soft soap. Do not use large amounts
of water to avoid risk to deteriorate the wood ag-
glomerate or particles. Dry after cleaning using a
dry cloth. Do not use wax or aerosol sprays. Do not
use special dust cloths with aerostatic charge. Do
not expose to direct sunlight.
Painted metal:
Clean the surface using a wet cotton cloth. Clean
only using water. In case of resistant dirt use water
with soap. In case of doubt try on a non-visible area
before applying. After cleaning dry the surface
using a dry cloth.
ES Instrucciones de Limpieza
y Mantenimiento
Superficies con acabado PerfectSense:
Limpiar la superficie con un trapo de algodón o mi-
crofibras húmedo. Limpiar únicamente con agua.
En caso de suciedad persistente usar un producto
jabonoso suave diluido en agua. No se deben usar
grandes cantidades de agua para evitar el riesgo
de deteriorar el aglomerado o las fibras de mad-
era. Secar posteriormente con un trapo seco. No
utilizar ceras o aerosoles. No utilizar trapos atra-
papolvo con carga aerostática. Proteger de la luz
solar directa.
Metal pintado:
Limpiar la superficie con un trapo de algodón o
de microfibras húmedo. Limpiar únicamente con
agua. En caso de suciedad persistente usar un
producto de limpieza suave diluido en agua. En
caso de duda probar primero en una pequeña
porción que no sea visible. Secar posteriormente
con un trapo seco.
CA Maintenance & Cleaning
Instructions
Superfícies amb acabat PerfectSense:
Netejar les superfícies amb un drap suau humite-
jat en aigua i algun producte de sabó poc agressiu.
No s’han de fer servir grans quantitats d’aigua per
evitar el risc de deteriorar l’aglomerat o els taulers
de fibres de fusta. Després de passar el drap humit,
assecar la superfície amb un drap sec per eliminar
les marques d’aigua. No utilitzar ceres o aerosols.
No utilitzar draps amb càrrega aerostàtica especials
per a atrapar pols. Protegir de la llum solar directa.
Superfícies de metall pintat:
Netejar la superfície amb un drap de coto o baieta
de microfibres. Netejar amb aigua i algun producte
de neteja suau, en cas de dubte cal provar primer
en una zona petita que no sigui visible.

Manual Thinking®
5
EN Index Tables
ES Índice Mesas
CA Indice Taules
MT-WT L99-D
Table L / Leg L / Double Surface
Mesa L / Pata L / Doble Superficie
Taula L / Pota L / Doble Superfície
>7
MT-WT L99
Table L / Leg L
Mesa L / Pata L
Taula L / Pota L
>10
MT-WT L75
Table L / Leg M
Mesa L / Pata M
Taula L / Pota M
>13
MT-WT L55
Table L / Leg S
Mesa L / Pata S
Taula L / Pota S
>16
MT-WT S99
Table S / Leg L
Mesa S / Pata L
Taula S / Pota L
>19
MT-WT S75
Table S / Leg M
Mesa S / Pata M
Taula S / Pota M
>22
MT-WT S55
Table S / Leg S
Mesa S / Pata S
Taula S / Pota S
>25

Manual Thinking®
6
MT-VP S170
Panel S / Leg L
Panel S / Pota L
Panell S / Pota L
>34
MT-VP S150
Panel XS / Leg L
Panel XS / Pota L
Panell XS / Pota L
>42
MT-VP S160
Panel S / Leg M
Panel S / Pota M
Panell S / Pota M
>38
MT-VP L200
Panel L / Leg L
Panel L / Pota L
Panell L / Pota L
>28
MT-VP L180
Panel L / Leg M
Panel L / Pota M
Panell L / Pota M
>31
EN Index Panels
ES Índice Paneles
CA Indice Panells

Manual Thinking®
7
MT-WT L99-D
EN Work Table Large / High Leg / Double Surface
ES Mesa Trabajo Grande / Pata Alta / Doble Superfície
CA Taula Treball Gran / Pota Alta / Doble Superfície
Convertible to/a:
MT-VP L200
Panel L / Leg L
Panel L / Pota L
Panell L / Pota L
>28
MT-VP S150
Panel XS / Leg L
Panel XS / Pota L
Panell XS / Pota L
>42

Manual Thinking®
8
MT-WT L99-D
EN Elements
ES Elementos
CA Elements
MT-WS160
Large board with 14 metal plaques.
Tablero grande con 14 placas metálicas.
Tauler gran amb 14 plaques metàl.liques.
MT-WS104
Small board with bevel and 6 metal plaques.
Tablero pequeño con bisel y 6 placas metálicas.
Tauler petit amb bisell y 6 plaques metàl.liques.
MT-LG84-X
Leg with extended bar.
Pata con barra alargada.
Pota amb barra allargada.
MT-LG84
Leg with short bar.
Pata con barra corta.
Pota amb barra corta.
2x MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
8x M6x50
6x M6x20
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x15
Gerrit Jan Veldman
MT-WS160
MT-WS104
MT-LG84-X MT-LG84
MT-WL100-X
2x
MT-WL100
2x
M6x50
8x
M6x20
6x

Manual Thinking®
9
MT-WT L99-D
EN Assembly
ES Montaje
CA Muntatge
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
8x
M6x50
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x15
Gerrit Jan Veldman
6x
M6x20
2x (A)
MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x (B)
MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
A
MT-WL100-X
M6x50
M6x20
A
MT-WL100-X
B
MT-WL100
B
MT-WL100
MT-LG84-X
MT-LG84

Manual Thinking®
10
MT-WT L99
EN Work Table Large / High Leg
ES Mesa Trabajo Grande / Pata Alta
CA Taula Treball Gran / Pota Alta
Convertible to/a:
MT-VP L200
Panel L / Leg L
Panel L / Pota L
Panell L / Pota L
>28

Manual Thinking®
11
MT-WT L99
EN Elements
ES Elementos
CA Elements
MT-WS160
Large board with 14 metal plaques.
Tablero grande con 14 placas metálicas.
Tauler gran amb 14 plaques metàl.liques.
MT-LG84-X
Leg with extended bar.
Pata con barra alargada.
Pota amb barra allargada.
MT-LG84
Leg with short bar.
Pata con barra corta.
Pota amb barra corta.
2x MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
8x M6x50
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
MT-WS160
MT-LG84-X MT-LG84
MT-WL100-X
2x
MT-WL100
2x
M6x50
8x

Manual Thinking®
12
MT-WT L99
EN Assembly
ES Montaje
CA Muntatge
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
8x
M6x50
A
MT-WL100-X
A
MT-WL100-X
B
MT-WL100
B
MT-WL100
MT-LG84-X
MT-LG84
2x (A)
MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x (B)
MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman

Manual Thinking®
13
MT-WT L75
EN Work Table Large / Medium Leg
ES Mesa Trabajo Grande / Pata Mediana
CA Taula Treball Gran / Pota Mitjana
Convertible to/a:
MT-VP L180
Panel L / Leg M
Panel L / Pota M
Panell L / Pota M
>31

Manual Thinking®
14
MT-WT L75
EN Elements
ES Elementos
CA Elements
MT-WS160
Large board with 14 metal plaques.
Tablero grande con 14 placas metálicas.
Tauler gran amb 14 plaques metàl.liques.
2x MT-LG60
Medium leg.
Pata mediana.
Pota mitjana.
2x MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
8x M6x50
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
MT-WS160
MT-LG60
2x
MT-WL100-X
2x
MT-WL100
2x
M6x50
8x

Manual Thinking®
15
MT-WT L75
EN Assembly
ES Montaje
CA Muntatge
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
8x
M6x50
2x (A)
MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x (B)
MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
A
MT-WL100-X
B
MT-WL100
A
MT-WL100-X
B
MT-WL100

Manual Thinking®
16
MT-WT L55
EN Work Table Large / Low Leg
ES Mesa Trabajo Grande / Pata Baja
CA Taula Treball Gran / Pota Baixa

Manual Thinking®
17
MT-WT L55
EN Elements
ES Elementos
CA Elements
MT-WS160
Large board with 14 metal plaques.
Tablero grande con 14 placas metálicas.
Tauler gran amb 14 plaques metàl.liques.
2x MT-LG40
Low leg.
Pata baja.
Pota baixa.
2x MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
8x M6x50
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
MT-WS160
MT-LG40
2x
MT-WL100-X
2x
MT-WL100
2x
M6x50
8x

Manual Thinking®
18
MT-WT L55
EN Assembly
ES Montaje
CA Muntatge
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
8x
M6x50
2x (A)
MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x (B)
MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
A
MT-WL100-X
B
MT-WL100
A
MT-WL100-X
B
MT-WL100

Manual Thinking®
19
MT-WT S99
EN Work Table Small / High Leg
ES Mesa Trabajo Pequeña / Pata Alta
CA Taula Treball Petita / Pota Alta
Convertible to/a:
MT-VP S170
Panel S / Leg L
Panel S / Pota L
Panell S / Pota L
>34

Manual Thinking®
20
MT-WT S99
EN Elements
ES Elementos
CA Elements
MT-WS120
Small board with 6 metal plaques.
Tablero pequeño con 6 placas metálicas.
Tauler petit amb 6 plaques metàl.liques.
2x MT-LG84
High leg.
Pata alta.
Pota alta.
2x MT-WL100-X
Wheel with brake.
Rueda con freno.
Roda amb fre.
2x MT-WL100
Wheel without brake.
Rueda sin freno.
Roda sense fre.
8x M6x50
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10 breaks
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
Rueda 100 M10
Gerrit Jan Veldman
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
13/01/2020
1/1
screw m8 x50
Gerrit Jan Veldman
MT-WS120
MT-LG84
2x
MT-WL100-X
2x
MT-WL100
2x
M6x50
8x