MARLINK SMALLTRACK User manual

•SMALLTRACK technical characteristics :
1) Dimensions : 123,5 x 76 x 33 mm (L x W x D), without bracket and cable
2) Weight : 440g
3) External power supply : Input DC 6-42V (1A)
4) External battery : Rechargeable 1800mAH Li-ion battery
5) Internal antennas Iridium, GPS
6) 3 axis G-force sensors : Inclinometer and accelerometer
114/126, avenue d’Alfortville – 94600 CHOISY LE ROI –France
Tél : [phone] - Fax : [phone]
S.A.S. au capital de 236 400€ - Code TVA FR 26 334 306 172 –Code APE 6130 Z - SIREN 334 306 172 00084 –
RC 334 306 172 www.marlink.com - [email protected]
1
SMALLTRACK USER GUIDE
MECHANICAL ALERT
Pushing the GREEN button,
immediately informs the PC
course that you or another
competitor has a
mechanical problem.
MEDICAL ALERT
Pushing the RED button,
immediately informs the PC
course that you are victim
or witness of an accident
that requires medical
assistance.
ON-OFF-RESTART
“PWR” Green LED when the
power is turned on
RESCUE
Red LED when alarm
has been sent
SAT
LED turns green
during transmission
GPS
Green LED when the
GPS signal is locked

SMALLTRACK BRACKET
Drilling Patterns
114/126, avenue d’Alfortville – 94600 CHOISY LE ROI –France
Tél : [phone] - Fax : [phone]
S.A.S. au capital de 236 400€ - Code TVA FR 26 334 306 172 –Code APE 6130 Z - SIREN 334 306 172 00084 –
RC 334 306 172 www.marlink.com - [e-mail]
2
SMALLTRACK MOUNTING GUIDE
Total height of the Smalltrack in the bracket is 50mm (29mm for the bracket only).
The bracket needs to be fixed on the vehicle by the 4 fixations points.
During the bracket installation on your vehicle:
•Keep the Smalltrack buttons visible and accessible
•Keep the top part not masked and with a clear view to the sky (for the internal antennas)
•Bracket must be in a horizontal position (from 0°to 50°inclination)
SILENT-BLOCKS
The bracket must be installed with a shock absorption system : silent-blocks
→ref Marlink : APR4057 (available on our E-shop https://eshop.marlink.com/en//)
Without a valid shock absorption system, the installation will be declared as no compliant at the
technical checks.

The power cable must be directly connected to the fuse box with permanent power supply (no
breaker –fuse 3A ).
If the configuration of your vehicle doesn’t enable it, you can connect your power cable to a
power extension (connected to the fuse box) as shown below :
1) Prepare your power cable, separating the black wire from the red and orange wires
2) Connect the power extension cable with the Iritrack power cable using terminals provided
- red & orange with red
- black with black
3) Use a plier for the connection
4) Then connect it to your battery
114/126, avenue d’Alfortville – 94600 CHOISY LE ROI –France
Tél : [phone] - Fax : [phone]
S.A.S. au capital de 236 400€ - Code TVA FR 26 334 306 172 –Code APE 6130 Z - SIREN 334 306 172 00084 –
RC 334 306 172 www.marlink.com - [e-mail]
3
POWER SUPPLY
SMALLTRACK MOUNTING GUIDE
1
4
2 3
56

EXAMPLE OF INSTALLATION
On a slab, fixed on the navigation column
4
Near to the Antenas, under the buble