Marshall Amplification EMBERTON User manual

USER MANUAL

USER MANUAL

003
1
234
DEVICE LAYOUT ENGLISH
1 CONTROL KNOB
I. POWER ON/OFF
Push and hold for 2 seconds
II. PLAY/PAUSE
Push once
III. SKIP FORWARD/BACK
Push to the right or the left
IV. FAST FORWARD/REWIND
Push to the right or left and hold
V. TURN UP/DOWN THE VOLUME
Push upwards or downwards
2 BLUETOOTH®PAIRING
BUTTON AND INDICATOR
Push the Bluetooth®button until the
indicator above starts blinking to initiate
Bluetooth pairing mode.
3 BATTERY INDICATOR
The 10 segment battery indicator shows
the battery charge.
4 USB PORT FOR CHARGING
Connect the speaker to a power source
via the included USB cable to charge
the battery.
The battery is fully charged when the
battery indicator stops blinking.
GETTING STARTED
01. Push the control knob for 2 seconds.
The speaker turns on and is in
pairing mode.
02. Select EMBERTON from your audio
device’s Bluetooth list.

003
1
234
DEVICE LAYOUT ENGLISH
1 CONTROL KNOB
I. POWER ON/OFF
Push and hold for 2 seconds
II. PLAY/PAUSE
Push once
III. SKIP FORWARD/BACK
Push to the right or the left
IV. FAST FORWARD/REWIND
Push to the right or left and hold
V. TURN UP/DOWN THE VOLUME
Push upwards or downwards
2 BLUETOOTH®PAIRING
BUTTON AND INDICATOR
Push the Bluetooth®button until the
indicator above starts blinking to initiate
Bluetooth pairing mode.
3 BATTERY INDICATOR
The 10 segment battery indicator shows
the battery charge.
4 USB PORT FOR CHARGING
Connect the speaker to a power source
via the included USB cable to charge
the battery.
The battery is fully charged when the
battery indicator stops blinking.
GETTING STARTED
01. Push the control knob for 2 seconds.
The speaker turns on and is in
pairing mode.
02. Select EMBERTON from your audio
device’s Bluetooth list.