Marshall Electronics CV565-MGB User manual

Marshall Electronics
Operation Manual
CV565-MGB
CV365-CGB
Full-HD Miniature GENLOCK POV Cameras

2
MENU STRUCTURE
SETUP SUB MENU SUB MENU
ESC
DC IRIS
AUTO
ATW
PUSH
COLOR TEMPERATURE
RED GAIN
BLUE GAIN
BRIGHTNESS 0~20
AGC LIMIT 0~20
AUTO
MANUAL
FLICKERLESS
DSS (SENS-UP) OFF, x2~64
WDR
BLC
SPOT
ACE LOW, MIDDLE, HIGH
LEVEL
COLOR
ANTI-SAT.
AGC LEVEL
AGC MARGIN
DWELL TIME
COLOR
NIGHT
RANGE 10%, 20%, 30%
FILTER LOW, MIDDLE, HIGH
AUTO C OFF, HALF, FULL
DAY/NIGHT
AUTO
IMAGE
STABILIZER
BACK LIGHT
BACK LIGHT
ECLIPSE
LENS
WB
CONTROL
MANUAL
AE CONTROL
(EXPOSURE) SHUTTER

3
MENU STRUCTURE
SETUP SUB MENU SUB MENU
MODE OFF, ON
OUTPUT EN OFF, ON
H-SYNC PHASE
PHASE SET
AUDIO LEVEL 0~143
AUDIO AGC OFF, ON
AGC MAX 0~119
SAMPLE BITS 16, 20, 24, 32 BITS
COLOR LEVEL 0~20
SHARPNESS 0~20
MIRROR
FLIP
D-ZOOM 1.0X ~ 16.0X
AUTO
MANUAL
DNR OFF, LOW, MIDDLE, HIGH
MOTION
SHADING
GAMMA
FRAME RATE
CAM VERSION
CAM TITLE
PRIVACY
CAM ID 0~255
BAUDRATE
LANGUAGE
RESET ON/CHANGE USER/FACTORY
EXIT
DISPLAY
CONTROL
AUDIO MIC
IMAGE
CONTROL DEFOG
GENLOCK

4
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
Press SET button to access the MAIN MENU.
Use the UP & DOWN buttons
to select the desired item.
Use the LEFT & RIGHT buttons
to change the sub-item.
Icon indicates “Press OSD Button” or “Enter Sub Menu”.
OSD Joystick and Button
SET
Used to access the menu and confirm selection.
Used to move the cursor up.
Used to move the cursor to left and change the value.
Used to move the cursor to right and change the value.
Used to move the cursor down
UP
DOWN
RIGHT
LEFT
SDI
IRIS
HDMI
POWER
I/O
I/O Cable for CV-565/365 CV365
ESC
ATW
AUTO
OFF
ON
ON
U
D
R
L

5
Select LENS using the UP or DOWN button.
You can change between ESC and DC IRIS using the LEFT or RIGHT button.
ESC: Manual IRIS Lens (Fixed IRIS lens)
LENS ESC, DC IRIS
DC IRIS: DC Auto IRIS Lens.
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
ATW
AUTO
OFF
ON
ON
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
DC IRIS
ATW
AUTO
OFF
ON
ON
Shutter will automatically control exposure if SHUTTER is set as AUTO.
IRIS will automatically control exposure.

6
Select WB CONTROL using the UP or DOWN button.
You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT button.
AUTO: Controls the automatic adjustment of the light source's color
temperature to 3,000°K ~ 8,000°K.
WB CONTROL AUTO, ATW, PUSH, MANUAL
ATW: Continuously adjusts camera color balance in accordance with any
change in color temperature. Compensates for color temperature changes
within the range of 1,900°K to 11,000°K.
PUSH: Color temperature will be manually adjusted by pushing the OSD
button. Place the white paper in front of the camera when OSD button is
pressed to obtain the optimum result.
MANUAL: Select this to fine-tune White Balance manually.
You can adjust the blue and red tone level manually.
COLOR TEMP: Select color temperature from LOW, MIDDLE, or HIGH.
BLUE: Adjust the Blue tone of the image. (0~20)
RED: Adjust the Red tone of the image. (0~20)
WB CONTROL
COLOR TEMP LOW
BLUE 10
RED 10
RETURN
■Adjust White Balance first by using the AUTO or ATW mode before switching to MANUAL mode.
■ White Balance may not work properly under the following conditions. In this case, select the ATW mode.
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or is installed in place where illumination changes
dramatically, the White Balance operation may become unstable.
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON

7
Camera will raise up gain to the selected gain limit under dark conditions.
Select AE CONTROL using the UP or DOWN button.
You can select one sub-mode from BRIGHTNESS, AGC LIMIT, SHUTTER, and DSS using
the UP or DOWN button.
AE CONTROL
BRIGHTNESS: The brightness control function adjusts gain and iris to keep
a brightness level.
AGC LIMIT: This function controls the amplification/gain process automatically
if the illumination falls under the usable level.
DSS (Digital Shutter Speed): When luminance condition is low, DSS can adjust
the picture quality by maintaining the light level. Slow shutter speed limits to x64.
SHUTTER: This function control shutter speed.
AE CONTROL
BRIGHTNESS
AGC LIMIT
SHUTER
DSS
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
10
10
AUTO
OFF
SHUTTER
MODE
RETURN
NORMAL
MANUAL: Shutter speed will be fixed at the selected speed. (1/60~40,000)
AUTO: Shutter controls exposure automatically when IRIS is manual. (NORMAL/DEBLUR)
FLICKERLESS: This function will help to decrease video flickers due to a conflict with the
installed lighting frequency.
SHUTTER
SPEED
RETURN
1/90
BRIGHTNESS, AGC LIMIT
SHUTTER, DSS

8
BACK LIGHT WDR, BLC, SPOT
BACK LIGHT
WDR: Enable user to view both object and background more clearly when
background is too bright.
WDR-LEVEL: Select the WDR level from LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
BLC: Enable a back light compensation feature.
SPOT: Enable a user to select a desired area on a picture and view that
area more clearly when background is too bright.
AE HOR POS: Move the SPOT area horizontally using the LEFT or RIGHT button.
AE VER POS:
Move the SPOT area vertically using the UP or DOWN button.
AE WIDTH:
Change the width of SPOT area using the LEFT or RIGHT button.
AE HEIGHT: Change the height of SPOT area using the UP or DOWN button.
Select BACK LIGHT using the UP or DOWN button and enter using SEL button.
You can select one sub-mode from BACK LIGHT, ACE, and ECLIPSE using the UP or DOWN button.
BACK LIGHT
BACK LIGHT
ACE
ECLIPSE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
SPOT
OFF
OFF
BACK LIGHT
AE HOR POS
AE VER POS
AE WIDTH
AE HEIGHT
RETURN
9
5
4
5

9
BACK LIGHT ACE, ECLIPSE
ACE :Brightness correction of the dark image area.
Select the GAIN level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
ECLIPSE :Highlight the bright area with a masking box with a selected color.
LEVEL:
Select the masking level from 0~20 using the LEFT or RIGHT button.
COLOR: Select the color of masking from GRN, MAG, RED, BLUE, BLK, WHT, YEL,
and CYN using the LEFT or RIGHT button.
Select BACK LIGHT using the UP or DOWN button and enter using SEL button.
You can select one sub-mode from BACK LIGHT, ACE, and ECLIPSE using the UP or DOWN button.
Enable/Disable ECLIPSE, selecting from OFF or ON using the LEFT or RIGHT button.
BACK LIGHT
BACK LIGHT
ACE
ECLIPSE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
SPOT
OFF
ON
BACK LIGHT
LEVEL
COLOR
RETURN
11
CYN

10
Select DAY / NIGHT using the UP or DOWN button.
You can select one sub-mode from AUTO, COLOR, and NIGHT using the UP or DOWN button.
DAY / NIGHT AUTO, COLOR, NIGHT
Select the AUTO mode using the LEFT or RIGHT button and enter into sub-menu using SEL button.
AUTO: The camera will stay in DAY in a normal environment, but will switch
to NIGHT mode when ambient illumination falls below this pre-set level.
ICR(IR Cut) filter is removed when it switches to Black/White.
ANTI-SAT.: Adjust the anti-saturation level manually.
This feature will reduce the saturation in which part of the
camera receiving the light affected by the IR or light in Night mode.
If the saturation is reduced the surroundings will be darker.
AGC LEVEL : Set the level of threshold for switching day to night. This level is same
as the exposure gain level.
AGC MARGIN: Set the margin between Day →Night switching level and Night →Day
switching level.
DWELL TIME: Select the dwell time between Day →Night and Night →Day change.
DAY / NIGHT
ANTI-SAT.
AGC LEVEL
AGC MARGIN
DWELL TIME
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
10
10
16
5
COLOR: The camera keeps color mode constantly.
NIGHT: The camera keeps Black/White mode constantly.

11
IMAGE STABILIZER
IMAGE STABILIZER :This function will reduce image blurriness due to vibrations
caused by hand shake or Pan/Tilt operation. The image will be digitally zoomed
in to compensate the shifted pixels.
RANGE: Set the digital zoom level for image stabilizing. (Max. 30%: x1.4 Digital Zoom)
FILTER: Select the level of correction hold filter for the worst case of image.
HIGH: Less image correction. Low: More image correction.
Select IMAGE STABILIZER using the UP or DOWN button and enter ON using SEL button.
You can select one sub-mode from RANGE, FILTER, and AUTO C using the UP or DOWN button.
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
AUTO C: Select the image auto centering level according to a vibration type.
FULL: The camera will correct the blurriness due to vibrations caused by both
hand shake or Pan/Tilt operation.
HALF: The camera will correct the blurriness due to vibrations caused by hand
shake.
OFF: Disable the auto centering function.
IMAGE STABILIZER
RANGE
FILTER
AUTO C
RETURN
30%
MIDDLE
HALF
IMAGE STABILIZER
RANGE
FILTER
AUTO C
RETURN
10%
MIDDLE
HALF
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
ON
ON
ON
RANGE, FILTER, AUTO C

12
AUDIO MIC
AUDIO MIC :The audio input will be embedded on SDI and HDMI output.
AUDIO LEVEL:
Enabled when AUDIO AGC is set OFF. Adjust the audio level manually.
AUDIO AGC: Automatically adjusts the MIC gain as the input signal becomes too loud
or too low.
Select AUDIO MIC using the UP or DOWN button and enter ON using SEL button.
You can select one sub-mode from AUDIO LEVEL, AUDIO AGC, AGC MAX, and SAMPLE BITS
using the UP or DOWN button.
AUDIO MIC
AUDIO LEVEL
AUDIO AGC
AGC MAX
SAMPLE BITS
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
ON
ON
ON
24
OFF
NOT_USED
24 BITS
AGC MAX: Enabled when AUDIO AGC is set ON. Set the maximum level of AUDIO AGC.
SAMPLE BITS: Select the bit depth of audio.

13
Select GENLOCK using the UP or DOWN button.
You can select MODE, OUTPUT EN, H-SYNC PHASE, and PHASE SET using the UP or
DOWN button.
GENLOCK MODE, OUTPUT EN
H-SYNC PHASE, PHASE SET
MODE : Enable or disable the genlock function.
Enable/Disable MODE, selecting from OFF or ON using the LEFT or RIGHT button.
OUTPUT EN : Enable or disable the reference signal loop out.
Enable/Disable OUTPUT EN selecting from OFF or ON using the LEFT or RIGHT button.
H-SYNC PHASE : Adjust H-sync pixel offset for a fine tuning.
GENLOCK
MODE
OUTPUT EN
H-SYNC PHASE
PHASE SET
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
ON
ON
+15
ON
PHASE SET : Apply the changes from “H-SYNC PHASE”.
Adjust the offset using the LEFT or RIGHT button.

14
Select IMAGE CONTROL using the UP or DOWN button.
You can select COLOR LEVEL, SHARPNESS, MIRROR, AND FLIP using the UP or
DOWN button.
IMAGE CONTROL COLOR LEVEL, SHARPNESS
MIRROR, FLIP
COLOR LEVEL : Adjust the color level value for a fine color tune.
Adjust the color level from 00~20 using the LEFT or RIGHT button.
SHARPNESS : Increasing this value, the picture outline becomes stronger and clearer.
Adjust the sharpness level from 00~20 using the LEFT or RIGHT button.
MIRROR : Video output is rotated horizontally.
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
15
10
OFF
OFF
1.0X
OFF
LOW
ON
OFF
STANDARD
HD1080P60
FLIP : Video output is rotated vertically.
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
15
10
ON
OFF
1.0X
OFF
LOW
ON
OFF
STANDARD
HD1080P60
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
15
10
OFF
ON
1.0X
OFF
LOW
ON
OFF
STANDARD
HD1080P60

15
Select IMAGE CONTROL using the UP or DOWN button.
You can select D-ZOOM, DEFOG, and DNR using the UP or DOWN button.
IMAGE CONTROL D-ZOOM, DEFOG, DNR
D-ZOOM : Digitally zoom the video output up to 16X.
Adjust the digital zoom level from 1.0~16.0X using the LEFT or RIGHT button.
DEFOG : This feature will help increase visibility in extreme weather conditions, such
as fog, rain or in a very strong luminous intensity.
DNR : This feature will reduce the video noise at low ambient light.
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
15
10
OFF
OFF
1.0X
OFF
LOW
ON
OFF
STANDARD
HD1080P60
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
15
10
ON
OFF
1.0X
ON
LOW
ON
OFF
STANDARD
HD1080P60
DEFOG
MODE
LEVEL
RETURN
AUTO
MIDDLE
MANUAL: Set the level of defoging function (LOW, MIDDLE, HIGH).
AUTO: This feature will help increase visibility in extreme weather conditions, such as
fog, rain or in a very strong luminous intensity.
Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.

16
Select IMAGE CONTROL using the UP or DOWN button.
You can select MOTION, SHADING, and GAMMA using the UP or DOWN button.
IMAGE CONTROL MOTION, SHADING, GAMMA
MOTION : This feature will observe the object movement by motion zone and sensit-
ivity that are pre-set with sub menu. The motion detection icon can be displayed out.
SHADING : This feature will correct the inconsistent brightness level in the image.
GAMMA : This feature will adjust video output brightness.
Select the GAMMA level from STANDARD, STRAIGHT, LOW, MIDDLE, and HIGH using the LEFT
or RIGHT button.
DET WINDOW: Set the motion detection window.
WINDOW ZONE: Select the motion detection window.
WIDOW USE: Enable/disable the motion detection window selected from WINDOW ZONE.
DET H-POS: Move the motion detection mask area horizontally.
DET V-POS: Move the motion detection mask area vertically.
DET H-SIZE:
Change the width of motion detection window.
DET V-SIZE: Change the height of motion detection window.
SENSITIVITY: Set the motion detection sensitivity.
MOTION OSD: Enable/disable the motion detection OSD.
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
15
10
ON
OFF
1.0X
ON
LOW
ON
OFF
STANDARD
HD1080P60
MOTION
DET WINDOW
SENSITIVITY
MOTION OSD
RETURN
5
ON

17
Select IMAGE CONTROL using the UP or DOWN button.
You can select FRAME RATE using the UP or DOWN button.
IMAGE CONTROL FRAME RATE
FRAME RATE : Change video output specification.
Select the FRAME RATE using the LEFT or RIGHT button.
Abailable Frame Rate are;
720p25, 720p30, 720p50, 720p60, 1080p25, 1080p30, 1080i50, 1080i60, 1080p50, 1080p60.
720p59 (720p59.94), 1080p29 (1080p29.97), 1080i59 (1080i59.94), and 1080p59 (1080p59.94)
IMAGE CONTROL
COLOR LEVEL
SHARPNESS
MIRROR
FLIP
D-ZOOM
DEFOG
DNR
MOTION
SHADING
GAMMA
FRAME RATE
RETURN
15
10
ON
OFF
1.0X
ON
LOW
ON
OFF
STANDARD
HD1080P60

18
Select DISPLAY CONTROL using the UP or DOWN button.
You can select CAM VERSION, CAM TITLE, PRIVACY, CAMERA ID, BAUD RATE, and
LANGUAGE using the UP or DOWN button.
DISPLAY CONTROL CAM VERSION
CAM TITLE
CAMERA TITLE : The camera title can be entered and it will appear over the video output.
You can input the camera title from the virtual keyboard using the LEFT, RIGHT, UP, DOWN, and
SET button.
USER TITLE
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
! @ # $ % ^ & * ( ) ? .
0 1 2 3 4 5 6 7 8 9
CLEAR RESET RETURN
CAM VERSION : Display the firmware version of the camera.
DISPLAY CONTROL
CAM VERSION
CAM TITLE
PRIVACY
CAM ID
BAUD RATE
LANGUAGE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
H. 0. 1. 3
ON
OFF
1
9600
ENG

19
Select DISPLAY CONTROL using the UP or DOWN button.
You can select PRIVACY using the UP or DOWN button.
DISPLAY CONTROL PRIVACY
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY
MASK NO
MASK ACTIVE
WIDTH SIZE
HEIGHT SIZE
HOR POS
VER POS
MASK COLOR
TRANS
RETURN
MASK NO: Select the mask number to modify using the LEFT or RIGHT button.
MASK ACTIVE: Enable/Disable the mask display using the LEFT or RIGHT button.
WIDTH SIZE: Change the width of SPOT area using the LEFT or RIGHT button.
HEIGHTSIZE: Change the height of SPOT area using the UP or DOWN button.
HOR POS:
Move the SPOT area horizontally using the LEFT or RIGHT button.
VER POS:
Move the SPOT area vertically using the UP or DOWN button.
MASK COLOR:
Select the mask color using the LEFT or RIGHT button.
TRANS: Select the mask transparency using the LEFT or RIGHT button.
DISPLAY CONTROL
CAMA VERSION
CAM TITLE
PRIVACY
CAM ID
BAUD RATE
LANGUAGE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
H. 0. 1. 3
ON
OFF
1
9600
ENG
0
ON
5
5
10
6
BLK
0

20
Select DISPLAY CONTROL using the UP or DOWN button.
You can select CAMERA ID, BAUDRATE, and LANGUAGE using the UP or DOWN button.
DISPLAY CONTROL CAMERA ID, BAUDRATE
LANGUAGE
CAMERA ID : Select the camera ID number from 0~255.
BAUDRATE : Set the baudrate of RS-485 communication (2400, 4800, 9600, 19200,
38400, 57600, 115200).
LANGUAGE : You can select the menu language according to your requirements.
Select the OSD language from ENGLISH, CHN, CHN(S), and JPN using the LEFT or
RIGHT button.
DISPLAY CONTROL
CAMERA VERSION
CAM TITLE
PRIVACY
CAM ID
BAUD RATE
LANGUAGE
RETURN
MENU
LENS
WB CONTROL
AE CONTROL
BACK LIGHT
DAY / NIGHT
IMAGE STABILIZER
AUDIO MIC
GENLOCK
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ESC
MANUAL
AUTO
OFF
ON
ON
H. 0. 1. 3
ON
OFF
1
9600
ENG