Marson MK8000 Series User manual

Safety precaution
Please read this safety precaution
information carefully. Failure to follow
the information provided may result
in fire, electric shock, or other
property damage or bodily injuries.
Device usage conditions
-
The scanner is designed so that there is no human
access to harmful laser light during normal operation,
otherwise mayincrease eye hazard by hazardous laser
light.
-
Ensure allcomponents are dry prior to mating terminals/
Device usage environment
-
Do not use the device in dusty or hot locations. Doing so
may damage the device.
-
Do not expose your device to direct sunlight such as on
the dashboard of a car for extended periods of time.
-
Do not use the device in humid locations. Doing so may
damage the device and void thewarranty.
-
Do not keep the device close to air conditioner vents.
Corrosion within the device may occur due to
condensation from changes in temperature.
-
Do not allow children to play with thedevice.
Know MK8000
Front view
Scan key
LED indicator
Touch screen
Scan key
batteries with peripheral devices. Mating wet
components may cause damage not covered by the
warranty.
- To ensure the unit working properly, please keep all
connectors away from the contaminants staying inside of
them such as dust, grease, mud, and water. The
negligence may cause the unit with no communication,
short circuited, overheated and so on.
-
In some situations, using your device may distract you
and cause serious injuries and damages. If you cannot
avoid using your device while driving or talking on the
phone, stop your vehicle or use hand-free kit.
Battery and Charging
-"We recommend use of standard peripherals, power
cable, and power adapter. Use of any non-standard
Keypad
Main key pad
MK8000 Series
Smart Handheld
-
Do not press the Power button on the device if the
device is wet or do not touch adapter or charger cable
with wet hands. There is risk of electric shock.
-
Do not use your device in an explosive danger zone.
-
If your device becomes wet, do not put your device in
heaters, microwaves, etc. to dry it. There is a risk of
explosion or malfunction.
-
Do not scratch the device’s touchscreen. Use only your
fingers. Never use an actual pen, or any other sharp
object on the touchscreen.
-
Do not paint your device. It can damage your screen or
your device’s exterior.
-
Although this device is very sturdy, do not drop, hit,
bend, or sit on it on purpose.
-
Do not attempt to modify, take apart, or repair the device
of hardware or software, it may causedevice
peripherals, cable, or power adapter may cause damage
not covered by the warranty.
-
If the charger is damaged, please ensure the charger is
being fully repaired before use the unit to avoid causing
short circuited.
-
Improper battery use may cause fire, explosion, or other
hazard.
-
If the battery is removed due to impact, heat,
submersion, or other damage, there is a risk of
explosion. Keep away from children and animals.
-
Do not allow the battery’s contacts to touch things like
necklaces, coins, or electric conductors. Do not give any
impact with sharp objects. There is a risk of explosion.
-
Use only the approved battery and charger. Using an
incompatible battery or charger may cause device
malfunction or other damage, such as fire.
Android
Back key
Space key
ESC key
Delete key
Android
Home key Android
Menu key
Power key
Enter key
Arrow key
-
Up
-
Down
-
Right
-
Left
Center: Scan
key
Computer Quick
Start Guide
Unboxing
-
MK8000 mobile computer
-
Rechargeable Li-ionbattery
-
USB Snap-on cable
(Optional)
-
Wrist strap
-
Quick start guide
-
5V / 2A adapter
malfunction. Contact to your customer service center.
Failure to do so will void your warranty.
-
Backup the data and information from your device. Your
data, such as ringtones, texts, and voice messages, may
be erased during repairs or upgrades.
-
You may not be able to use this wireless device in
basements, open fields, skyscrapers, or other places
where the signal is weak.
-
Avoid using or storing this device at extreme
temperatures. This device is designed to work at
temperatures between -20°C ~ 50°C (-4°F ~ 122°F),
work at humidity level between 10% ~ 90%, storage at
temperatures between -30°C ~ 60°C (-22°F ~ 140°F),
and storage at humidity level between 5% ~ 95%.
Device usage environment
-
Do not use the device while driving or operating heavy
machinery. Doingso may result in death or serious injury.
-
Do not use the device in locations with combustible
goods. Doing so may result in an explosion.
When you are not using the device for a long period,
take out the battery and keep the device and the
battery in a dry, cool place. Also, charge the battery at
least once a month. If you keep it without charging for
a long time, it may cause device malfunction.
-
Do not charge battery at a temperature lower than 5°C,
which will increasethe internal resistance to cause heat
and make the battery unstable and unsafe. Further, to
protect and avoid battery from inflating, the battery is
detected for thermal protection and will not be charged
when the temperature of battery is over 45 degrees.
Frequency Interference
-
This wireless device may cause radio frequency
interference, so use Airplane mode or turn off the device
when prohibited.
-
The device emits an electromagnetic fields. It may
interfere with your medical devices.
-
Do not place credit cards, phone cards, bankbook, and
tickets next to the device. The magnetic field of the
device can damage their magnetic strips.
Programmable function key
Back view
Scanner
Camera
FlashLED
Speaker
4
21 3

Rear view
2. Slide the microSD/SIM card
metal holders to the open position
Installing MK8000 battery
To install battery.
1. Align the battery into the battery compartment
Charging MK8000 battery
Using snap-on charging cable to charge
MK8000 and the user can also uses it to
establish communication between MK8000
and PC.
Bottom
view
micro SIM card slot
microSD card slot
3.
Pad connector
for charging and
communication
microSD card slot
SIM cardslot
2.
Press the battery down firmly. Ensure that"
both battery release buttons on the sides of"
the MK8000 return to the home position and"
a “click” sound is heard
Step 1: Attach the snap-on cable
to MK8000
Step 2: For battery charging,
insert
snap-on cable USB
connector into
Marson approved
1 adapter Step 3: For data communication,
plug snap-on cable
connector into a PC USB
port
2
Cable
Snap-on charging and
communication cable
Setup
4. Place the microSD/SIM cards into the
contact area with the contacts facing down
Removing MK8000 battery
MK8000 supports battery hot swap mode.
When user removes the battery, the
To start using MK8000 for the first time.
- Install a microSD card (optional)
-"Install a micro SIM card (optional)
-"Install the battery
-"Charge the MK8000
-"Power on the MK8000
Installing the
microSD/SIM cards
The microSD/SIM card slots are under
battery pack and protected by a plastic
cover.
1.
5. Close the microSD/SIM card holders and slide
the holders to the lock position
6.
display turns off and the device enters a
very low power state. The MK8000 retains
RAM data for approximately 300secs.
Replace the battery within 300secs to
preserve memory persistence.
1. Pull down the battery door latch
and the battery will be released
automatically
2.
Important charging related information.
1. AC power adapter
- Input: AC 100-240V, 50/60Hz;
output: DC 5V/2A, Marson provided
2. Battery pack
- 3.8V, 3100mAh rechargeable Li-ion,
Marson proprietary
3. Charging time
- Approx. 4hours using power adapter
4. Status LED
- Off: Battery is not charging
- Solid red: Battery is charging
- Solid green: Battery charging iscomplete
- Blink red: Charging error, e.g. temperature is
too high or too low, voltage is too high or too
low
Legal Notices:
All rights reserved. Reproduction, use, modification, or disclosure to
third parties of this document or any part thereof without
the express permission of Marson Technology Corp. is strictly
prohibited. The information contained herein is provided “as is”
without warranty of any kind, either express or implied is made in
relation to the accuracy, reliability, fitness for a particular.
www.marson.com.tw
76 8
5
Lift the microSD/SIM
card holders
3
Lift the rubber cover to
the open position
Close the rubber cover to the
lock position