marvelTech MDU-POE LFP 9 User manual
MDU-POE LFP 9
L
MDU-POE LFP 9
MDU-POE LFP 9
1) ON/OFF switch
2) Power LED indicator
3) 100% Battery LED lndicator
4) 75% Battery LED lndicator
5) 50% Battery LED lndicator
6) 25% Battery LED lndicator
7) AC input socket
8) USB (5Vdc) output
9) Output socket 9V/12V
10) Output voltage selector 9V/12V
11) Reset button for POE devices
12) Ethernet output interface
(POE output: 15V/24V)
13) LAN ethernet interface
14) Output voltage selector 15V/24V
15V/24V
1) High capacity LiFePO4 batteries, provides long backup to the loads,
Cycle Life :1500 Cycle
2) High compatibility, suitable for most digitalproducts in the market.
3) USB output (5V), can supply charging for digitalproductslike mobile
phone, PDA, PSP, IPOD, MP4... etc.
4) Power Over Ethernet(POE) can transmit the data and power at the same
time to simplify wire set.
5) Intelligent circuit design with over-charging, over-discharging and
short circuit protections.
6) Built-in adapter allowswide AC voltage range (100~240Vac).
Before connecting the devices to the UPS, you must check the nominal working
voltage, current and polarity of the load, then adjust the voltage of the UPS to the
corresponding load voltage, confirm that the corresponding port is correct then
connect to the load to prevent the machine from being burned out by connecting the
wrong voltage.
Each output terminal of this model has independent output power protection and
short-circuit protection, and has a generals power protection mechanism. The power
of the load connected to all ports cannot exceed the defaulted output power.
Otherwise, the corresponding port will turn off. When the total power setting is
exceeded, the 4 power indicator lights will flash at the same time and all output ports
will turn off. Please remove the overloaded load. The UPS will restart every 5 seconds.
UPS work continuously when the load within overload protection range.
Press and hold the power button for 2-3 seconds to start the UPS. If the 9V or 12V
indicator light is green, it means that the DC port is outputting voltage, and the
output voltage can be selected between 9V and 12V by moving the DC voltage switch.
By moving the POE voltage switch, the output voltage of the POE port can be selected
between 24V and 48V. Plug and play USB provides stable 5V power supply for digital
products.
When the battery is less than 10%, the battery indicator flashes red. 10%~30% battery
indicator light is solid red. The 30%~80% battery indicator light is solid orange.
80%~100% battery indicator light is solid green. When charging, the corresponding
battery level indicator flashes.
1.
2.
3.
4.
connecting
the
devices
to
the
UPS,
you
must
check
Model
Rated working voltage
Output power(Max.)
Output
Output voltage(selectable)
Output polarity
QTY. & capacity of battery
Unit dimension(mm)
Net weight(kg)
* Products specifications are subject to change without notice.
DC
9Vdc / 12Vdc
9V1.8A / 12V1.4A
MDU-POE LFP 9
100~240Vac / 50-60Hz
17W
4500mAh*2 ,1500 Cycle
160*105*27.5
0.415
USB
5Vdc
5V2A
POE
15Vdc / 24Vdc
+4,5pins -7,8pins
15V1A / 24V0.7A
Output power & current (in common)
