CyberPower BM100 User manual

Quick Start Guide
Battery Management System
BM100
BP100-12V
Battery Management System
BM100
BP100-12V
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
1
32
INSTALLATION GUIDE
PRODUCT CONTENTS
Power Cable*
(244cm; L4)
Communication Cable (x4)
(90cm; L1)
2 Mounting Brackets 4 Bracket Mounting Screws
DB9/RJ45 Communication Cable
(183cm)
Battery Manager
BM100
Battery Manager Battery Probe
Battery Probe
BP100-12V
Battery Connecting Cable
(30cm; L3)
Probe Communication Cable
(30cm; L2)
1. Connect the battery connecting cable (L3) to each battery and then
connect the cable to each Battery Probe through battery connector
(CN3).
2. Fix each Battery Probe to each battery with Loop tape.
3. Connect the Battery Manager’s ‘A’ (RJ25) port to the ‘Left’ (‘In’)
RJ25 port (CN1) of the first Battery Probe with the communication
cable (L1).
4. Connect Battery Probes with one another through RJ25 ports (CN1)
of Battery Probes with probe communication cables (L2), and up to
40 Battery Probes in a string.
5. Connect an Ethernet cable to the Ethernet port of the Manager.
6. Provide power to the Battery Manager through the DC power (CN4).
The required Battery Manager input voltage is 15V min, 60V max.
Scenario ①
For 4 or less batteries per string: Use the included power cable (L4)
to connect the Battery Manager. (Warning: A battery can present a
high risk of short circuit current and electrical shock. Please pay
attention to the input voltage.)
Scenario ②
For 5 or more batteries per string: Connect the Battery Manager to
the utility power with an AC/DC adapter cord.
7. Press the RESTART button for one second to restart the system.
8. IP address will show on the LCD interface once the Manager is
powered and the system is initialized, or you can find it through
[About → Network info. →IPv4 address]. Use the IP address to
login to the Web Interface. The factory default Username/Password
is admin/admin.
NOTE: Once the number of battery string and connected battery has been
changed from last configuration, please configure it via web interface on
the [Battery →Configuration], select the number of string(s) and
batteries per string, and then click Apply. Or you can reset the system to
the factory default setting via LCD interface on the [Reset/Reboot →
Reset →Confirm].
Baery #1
L3
Probe
CN3
CN1
Baery #2
L3
Probe
CN3
CN1
Baery #3
L3
Probe
CN3
CN1
D
C
B
A
CN4
Battery
Manager
L4 (Scenario ①)
L1
Ethernet
L2
L2
Max. 40 batteries
*For 4 or less batteries per string.
Baery #4
L3
Probe
CN3
CN1
AC/DC Adapter (Scenario ②)
L2

K01-0000625-01
5
76
4
PANEL DESCRIPTION
Battery Manager Battery Probe
DC POWER
+
RESTART ADDRESS
SETUP/ENV RS485 A B C D UPS Link Tx/Rx
CN4 Ethernet Port
Name
DC POWER
(CN4)
RESTART
ADDRESS
SETUP/ENV
RS485
STRING
A/B/C/D
UPS
Ethernet Port
Description
Power input of the Battery Manager
Button to restart the system and detect
the battery setting
Battery Manager RS485 communication
address, LSB is on the left
Port for firmware upgrade and an
environmental sensor
Reserved for future use
Port connected to Battery Probes
Port connected to UPS (Future use)
Port connected the Ethernet cable
EX_TEMP
Battery Connector
In Out B1
CN3
CN1
Name
Battery Connector
(CN3)
EX_TEMP
In/Out
(CN1)
B1
Description
Connected to battery
Port for external temperature sensor
(Future use)
Port connected to Battery Manager
through the ‘In’ port, and to another
Battery Probe (Left side is ‘In’ and
right side is ‘Out’)
Button (Future use)
LED INDICATORS
Battery Manager Battery Probe
System
UPS
Battery Equalizing
String Status
Battery Status
BM100
Select
Enter
LED Name
System
UPS
Battery Status
String Status
Battery
Equalizing
Condition
Battery Manager is supplied power
and works normally
The communication of the UPS is
normal (Future use)
The condition of the connected
batteries
The condition of the string current
(Future use)
The equalization function is active
LED1 LED2
LED Name
LED1 (Red)
LED2 (Green)
Condition
The battery is abnormal
Flash: Powered but there is a
communication problem (Flash in
a second period)
Blink: Powered and the communication
is normal, and datagram is
receiving or transmitting
Cyber Power Systems, Inc.
www.cyberpower.com
For USA and Canada:
4241 12th Ave East, Suite 400
Shakopee, MN 55379
Toll-free: [phone]
For all other regions:
Please visit our website for local contact information.