1. Package Contents
Youshouldhavereceived thefollowing itemsinsideof package:
- UPSUnit
- Startup Manual
- Communicationcable
- InstallationCDformonitoringsoftware
2. Product Overview
Batterybackup
receptacles
Statusindicators
ACpowerinput
Circuitbreaker
Modem/phone/
Networksurge
protection
Coaxialsurge
protection(option)
USBcommunication
port
|
Powerswitch
3. Software Installation
1. InserttheincludedinstallationCDinto CD-ROMdriveandthen
followthe on-screen instructions. If there no screen shows when
inserting the CDafter1 minute,please executesetup.exe for
initiating installation software.
2.Enter SerialNo labelpastedon the UPSunittoinstallthe
software.
3.Whenyour computerrestarts,themonitoring software willappear
as a greenplugiconlocatedin thesystemtray, neartheclock
4. Installation & Initial Startup
NOTE:Beforeinstallation,pleaseinspecttheunit.Be
sure thatnothinginsidethepackageis damaged.
Connect to Utilityand Charging
Plug in the AC input cord to the wall
outlet. For the best results, suggest to
charge the battery at least 4 hours
before initial use. The unit charges its
batterywhile connecting totheutility.
Connect theLoads
Plugintheloadstooutputreceptaclesonthe
rearpaneloftheUPS. Simplyturnonthepower
switchof UPSunit,then devicesconnectedto
theUPSwillbeprotectedbyUPSunit.
CAUTION:NEVERconnect alaserprinteror
scannertothe UPSunit.Thismay causethe
damageofthe unit.
Connect Modem/Phone/Network toSurge Protection
Connectasinglemodem/phone/networkline intosurge-protected
“IN” outlet ontheback panelof the UPS unit. Connectfrom “OUT”
outlettothecomputerwithphonelinecable.
Connect Coax Protected Port
(Forthemodelwithcoaxprotected
portonly)
This coaxprotectedport will protectyourTV antenna,cable,and
network.
Turn On/Offthe Unit
Turn on theUPSunitbypressingthe powerswitch. Turnoffthe
UPSunitbypressingagainthe powerswitch.Youmaycheckthe
StatusIndicatorsSectionforthedetails.
ColdStart Function
Whenthe UPSisoffand there is nopower utility, it'sstillpossibleto
coldstart theUPS unittopowertheloads.
5. Status Indicators
Status VisualIndication Alarm
ACMode GreenPowerOnLED-On Notapplicable
OnBattery YellowBatt.ModeLED-Flash Soundingevery10seconds
LowBattery YellowBatt.ModeLED-Flash Soundingeverysecond
BatteryReplacement Red FaultLED -On Soundingevery2seconds
Overload GreenPowerOnLEDon Soundingevery0.5 seconds
UPSFault Red FaultLED-On Continuouslysounding
WARNUNG:DiesisteineUSV derKlasseC2. InWohnansiedlungenkanndiesesErzeugnis Funkstörungenhervorrufen,dannmussderBenutzer
zusätzlicheMaßnahmenergreifen.
WARNING:Thisisa UPSClassC2.In residentialsubdivisiontheproduct maycauseharmful interference,then theusers havetotakeadditional
measures.
EN