Massive Audio Volt V500.2 User manual

Volt Series Full Range Amplifiers
VV
500.2500.2
VV
1000.41000.4
VV
1000.11000.1

2
8 AWG
11.81 in
8 AWG
24 AWG
8 AWG

2-CHANNEL AMPLIFIERS: V500.2
3
12
The Ground loop isolator is only needed if you hear engine noise while listening to music. (Only applicable if the “High
Level Input Terminal” is used instead of the RCA input) To eliminate engine noise, connect the ground loop terminal to
the ground wire from your head unit. This will consist of splitting the wire from your head unit and connecting that
directly to the ground loop terminal of the amplifier.
lower

2-CHANNEL AMPLIFIERS: V500.2
4
12
7.8in
3.4in 6.3in
7
5
OFF
minus

2-CHANNEL AMPLIFIERS: V500.2
5
12
5750
5
minus

4-CHANNEL AMPLIFIERS: V1000.4
6
12
lower

4-CHANNEL AMPLIFIERS: V1000.4
7
12
7.8in
3.4in 6.3in
75
OFF
minus

4-CHANNEL AMPLIFIERS: V1000.4
8
12
5750
75
minus

4-CHANNEL AMPLIFIERS: V1000.4
9
2
12
7
7
OFF

1-CHANNEL AMPLIFIERS: V1000.1
10
12
9
9
This is not a gain remote.
The Ground loop isolator is only needed if you hear engine noise while listening to music. (Only applicable if the “High
Level Input Terminal” is used instead of the RCA input) To eliminate engine noise, connect the ground loop terminal to
the ground wire from your head unit. This will consist of splitting the wire from your head unit and connecting that
directly to the ground loop terminal of the amplifier.
matching
matching

1-CHANNEL AMPLIFIERS: V1000.1
11
12
5
minus
matching
LOW PASS CONTROLLER
Adjust a frequency between 50Hz - 750Hz, depending on the size and response of the Subwoofer.
matching

V500.2
V1000.4
V1000.1
1
= speaker - rear right - positive
= speaker - rear right - positive
= speaker - rear right - positive
= speaker - rear right - positive
white
white
white
white
grey and black
grey and black
grey and black
grey and black
= speaker - rear left - negative
= speaker - rear left - negative
= speaker - rear left - negative
= speaker - rear left - negative
grey
grey
grey
grey
= speaker - rear left - positive
= speaker - rear left - positive
= speaker - rear left - positive
= speaker - rear left - positive
= speaker - rear right - negative
= speaker - rear right - negative
= speaker - rear right - negative
= speaker - rear right - negative
white and black
white and black
white and black
white and black
12
The Ground loop isolator is only needed if you hear engine noise while listening to music. (Only applicable if the “High
Level Input Terminal” is used instead of the RCA input) To eliminate engine noise, connect the ground loop terminal to
the ground wire from your head unit. This will consist of splitting the wire from your head unit and connecting that
directly to the ground loop terminal of the amplifier.