Sony XM-405EQX Marketing Specifications User manual

14
2000 MOBILE PRODUCT UIDE – PART 2
OTL (output transformerless) Circuit
Pulse Power Supply
RCA Pin Jacks
High Level Input Connector
Speaker Terminals
2-8 ohms (stereo)
48 ohms (when used as bridging amplifier)
40 W x 4 (20-20 kHz, 0.04% THD, at 4 Ω) + 100 W x 1 (20-200Hz 0.04% THD, at 4 Ω)
50 W x 4 (20-20 kHz, 0.1% THD, at 2 Ω) + 125 W x 1 (20-200Hz 0.1% THD, at 2 Ω)
100 W x 2 (20-20 kHz, 0.1% THD, at 4 Ω) + 100 W x 1(20-200Hz 0.04% THD, at 4 Ω)
80 W x 4 + 200 W x 1 (at 4 Ω)
50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ±12 dB
5-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 Ω)
0.2-4.0 V (RCA pin jack); 0.4-8.0 V (high level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
0-10 dB (40Hz)
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 33 A
Remote Input: 1.5 mA
Approx. 282 x 55 x 450 mm (111/8x 21/4x 173/4in.) (not incl. projecting parts and controls)
Approx. 4.7 kg (10 lb. 6 oz.) (not including accessories)
Mounting Screws (4); Terminal Cap (1)
Specifications
Circuit System
Inputs
Outputs
Speaker Impedance
Rated Outputs (at 14.4 VDC)
5 Speaker
3 Speaker
Maximum Output
Equalizer
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Low Boost
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
XM-405EQX
5/3 Channel Amplifier/EQ
• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
• 50/200/800/3.2k/12.8kHz Frequency Centers
• F/R/S 5+5+1 Band +/-12 dB Adjustable EQ
• Recessed Controls w/Level LEDs
• Optional XA-SLC Remote Sub-Level Control
• 40 W x 4 + 100 W, 4Ωat 0.04% THD
• 55 W x 4 + 125 W, 2Ωat 0.1% THD
• 100 W x 2 + 100 W, 4Ωat 0.1% THD
• RCA and Speaker Level Inputs
• Regulated MOSFET Power Supply
Design and specifications subject to change without notice.

15
2000 MOBILE PRODUCT UIDE – PART 2
XM-405EQX
5/3 Channel Amplifier/EQ