HAVING TROUBLE? CALL SUPPORT AT: 800.825.5397
3-POINT MOUNT ASSEMBLY 3PT-AC
TOOLS
PARTS
Line up holes of the PNB Boom Assembly with the holes of the
Boom Brackets on the rear of 3-Point Mount Frame.
Install with 4 Bolts and Flange Nuts from Boom Assembly. Tighten
with a Socket Wrench.
Attaches Boom Assembly to 3-Point Mount
1a.
NOTE: Reference Boom
Assembly Card for needed
components to install Boom
Assembly to 3-Point Mount
Frame. Boom Upright
Brackets that may come
with Boom Assembly are not
needed. Use your Tractor’s
height control to manage
your spray height.
INCLUDED
COMPONENTS
1/2” SOCKET WRENCH
TOOLS REQUIRED
Tank Assembly (1)
NOTE:
THIS 3-POINT MOUNT COMES PRE-ASSEMBLED. ONLY STEP REQUIRED IS
TO INSTALL BOOM KIT. FOLLOW BOOM ASSEMBLY INSTRUCTIONS BEFORE
INSTALLING TO 3-POINT MOUNT.
BEFORE ASSEMBLING YOUR 3-POINT MOUNT
FOLLOW INSTRUCTIONS IN YOUR SPOT
SPRAYER ASSEMBLY MANUAL
TOOLS
PARTS
Line up holes of the 620 Boom Assembly with the holes of the
Boom Brackets on the rear of 3-Point Mount Frame.
Install with 2 Bolts and Flange Nuts from Boom Assembly. Tighten
with a Socket Wrench.
Attaches Boom Assembly to 3-Point Mount
1b.
NOTE: Reference Boom
Assembly Card for needed
components to install Boom
Assembly to 3-Point Mount
Frame. Boom Upright
Brackets that may come
with Boom Assembly are not
needed. Use your Tractor’s
height control to manage
your spray height.
