Max MX3 BT LED Party Tube User manual

MX3 BT LED Party Tube
Ref. nr.: 130.121
INSTRUCTION MANUAL
V1.1

2
ENGLISH
Congratulations to the purchase of this Max product. Please read this manual thoroughly prior to using the product in order to
benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer.
Do NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material and
leave at least 1 meter space on every side to ensure
sufficient cooling.
- This product contains high intensity LEDs. Do not look
into the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Max cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.

3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OPERATION GUIDE:
: Pause/ play the music; Led light switch.
: answer/ end a phone call.
: Long press to power on/off; Short press to switch BT/ Micro SD card / USB / Line in mode when in
different model; Long press to close the display light.
Note: all together 2 flashing modes, long press for changing each flashing mode, then turn off the light.
:long press for "Volume up" ,short press for " next song"
:long press for "Volume down" , short press " for last song"
BT MODE
Turn on the device, and LED will flash rapidly and will try pairing.
Follow the operating instructions for BT connection on your device and allow searching BT speaker.
Usually this is done by going to “set up ”menu, connect for “BT” function and then selecting the option to search for
BT devices.
Your device (mobile phone, PC, tablet,. etc.) will detect the BT speaker and ask if you wish to connect with the
speaker. Press “Yes” or “confirm” to confirm this action.
if your phone requires a password or a PIN number, enter 0000 and confirm it.
After connection, you can adjust volume and select last/next song by pressing and .If you want to get
the coming phone call, short press , then you can make phone call by the speaker. Press again to end the
phone call. And the speaker will recover playing music if audio source don't be stopped. ( support in MP)

4
MUSIC PLAY MODE
Short press in 5 seconds , the system will enter music playing after insert the Micro SD card before
switching modes, otherwise it will not notice the “Music mode”. it will be played music from TF card from 128MB to
32GB. Short press in 1 second to pause the music; press it again, to restore music playing.
USB PLAYBACK MODE
Short press in 5 seconds , the system will remind" USB mode' after insert the USB flash disk before
switching modes, otherwise it will not notice the “USB mode”. it will be played music from USB flash disk from
128MB to 32GB. Short press in 1 second to pause the music ; press it again, to restore music playing.
AUX-INPUT MODE
To connect with the speaker by Aux in cable to PC ,Mobile or other audio source by Line in cable .And the system
will remind "AUX input mode" then audio signal can be played by the speaker from external audio resource. Short
press in 5 seconds switch to other modes
During the Line in mode, long press / for volume up/down.
LED LIGHT
Long press in 5 seconds, the LED light will change flashing mode, four colors light switch; Long press
again, four colors light on.
CHARGING
Charge the speaker in “OFF” mode through the micro USB cable from a computer or through a DC adaptor.
Status LED Indication will be red, when charge full, the light will be off
If charge that in “ON” mode through the USB cable from a computer or through a DC adaptor, the LED with
colourful will flash all the time.

5
INDICATOR LIGHT
The indicator will work as follow, when:
Blue LED flashing : Speaker is in BT mode
Blue LED flashing rapidly: BT is pairing
Blue LED keep on : BT connected
Blue LED flashing slow: Music play by Micro SD;
Blue LED keep on: Music play is paused
Blue led keep on: Line in Mode
Red LED on: connected to speaker through USB charge cable
Red LED off: the speaker is charged full

6
TECHNICAL SPECIFICATION
Voltage : DC 5Volt
Speaker power : 2x3Watt
Battery : 1200mAh
Inputs : BT, TF, USB, Line In 3.5mm Jack
Dimensions per unit : 205 x 65 x 62mm
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can
be changed without prior notice.

7
Declaration of Conformity
Manufacturer: TRONIOS BV
Bedrijvenpark Twente 415
7602 KM –ALMELO
[phone]
[phone]
The Netherlands
Product number: 130.121
Product Description: MX3 BT LED Party Tube
Trade Name: MAX
Regulatory Requirement: EN 55013:2013
EN 55020:2007+A11:2011
I hereby declare that the product meets the requirements stated in Directives 2014/35/EU and 2014/30/EU
and conforms to the above mentioned Declarations.
Almelo,
22-02-2017
Name : M. Velders
Signature :

8
Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2017 by TRONIOS the Netherlands