•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
•Do not attempt to remove any parts of the housing nor insert any metal objects into the interior of the
appliance.
•To prevent damage to the power cord, do not let it pass over sharp corners or edges.
•Do not expose the appliance to rain or moisture and do not operate the appliance outdoors or with wet
hands.
•Use only clean cold water, and let the water run for approx. two minutes before filling.
•The appliance operates at very high temperatures, Caution: there is danger of scalding from escaping water or
steam. Do not touch any part of the kettle except the handle (when the appliance is in use and ensure that
the lid is properly screwed. This appliance is designed for heating water only. Never put any other liquid into
the kettle.
•The appliance must be positioned so that the plug is accessible
•If the kettle is overfilled, boiling water may be ejected.
•WARNING –Position the lid so that steam is directed away from the handle.
•WARNING –Do not remove the lid while the water is boiling.
•The kettle is only to be used with the stand provided.
•CAUTION –Ensure that the kettle is switched off before removing it from its stand.
•This appliance is intended to be used in household and similar applications such as:
•staff kitchen areas in shops, offices, and other working environments.
•by clients in hotels, motels, and other residential type environments.
•farmhouses.
•bed and breakfast type environments.
CAUTION: HOT SURFACE
OPERATION GUIDELINES
Before using for the first time
•Prior to initial use, clean it by going through several boiling cycles, using clean water with each cycle, and filling
the kettle (3) to its upper marking.
•Operation
•Place the cordless base (7) on a firm and level surface.
•Pour the desired amount of clean water into the kettle (3), Do not touch any part of the kettle except the handle.
When the appliance is in use, and ensure that the cover(1) is properly closed , The amount of water can be
measured by the level mark on the outside of the kettle , Always pay attention to the minimum and maximum
levels and ensure that the cover (1)is properly and firmly closed .
•Position the kettle in such a way on the subbase (5) that the underside of the kettle fits precisely into the contact
on the base
•Insert the plug into a wall socket.
•Put the on/off switch (6) to its ‘1’ position to start the heating process, the indicator lamp will light up.
•As soon as the water reaches boiling point, the on/off switch (6) return automatically to the “0” position, the
indicator lamp will go out. The water kettle can also be switched off manually by putting the on/off switch to the
“0” position.
•The hot water may now be poured safely through the spout into another container, safety cut –out.
