MB&F LEGACY MACHINE SE User manual

LEGACY MACHINE SE

FUNCTIONS
OPERATING INSTRUCTIONS: WINDING
OPERATING INSTRUCTIONS: TIME SETTING
OPERATING INSTRUCTIONS: DATE SETTING
05
07
09
11

FUNCTIONS
1. HOURS AND MINUTES
2. DATE
3. POWER RESERVE INDICATOR
1
2 3
LEGACY MACHINE SPLIT ESCAPEMENT
05

OPERATING INSTRUCTIONSLEGACY MACHINE SPLIT ESCAPEMENT
1. WINDING
Your watch is equipped with a manual winding movement.
If it has stopped, wind the crown clockwise in the “In” position, until you
reach the maximum power reserve capacity as shown by the power reserve
indicator (A).
07
(A)

OPERATING INSTRUCTIONSLEGACY MACHINE SPLIT ESCAPEMENT
2. TIME SETTING
Pull the crown to the “Out” position, and turn the crown to set the time.
Push the crown back against the case when finished.
• The hands can be turned forwards or backwards at any time, but it is best to
avoid moving them back through more than 20 hours.
• Turning the hands backwards beyond midnight will move the date backwards
correspondingly.
09

OPERATING INSTRUCTIONSLEGACY MACHINE SPLIT ESCAPEMENT
3. DATE SETTING
Be careful to never apply excessive force to the corrector; only use your fingers
and no other tools which could not only force the movement, but also slip and
scratch the case.
Push the corrector Ato advance the date by 1 day each time you press.
An easy solution to set the date after the watch has stopped is to set the date
one day before and advance the hours and minutes hands forward to have the
date advance to the next day.
Warning: It is strongly recommended not to make the date correction between
9 p.m. and 3 a.m. The date mechanism is engaged during this period and oper-
ation might damage the mechanism.
A
11

WWW.MBANDF.COM - PRINTED IN SWITZERLAND - SPRING 2019