McIntosh D1100 Instruction manual

1A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: [phone] FAX: [phone] Part No. 04172100
D1100 Digital Preamplifier Input and Control Connections Diagram (when used as a DAC with an Analog only Preamplifier)
WLAN ANT 1 WLAN ANT 2
Digital Audio Player
AM/FM Tuner
Media Server
SACD/CD Transport
Note: Refer to the D1100 Owner’s Manual page 8 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
Computer
Analog Preamplifier Controller
TO TUBE PRE AMPLIFIER
RIGHT INPUT
TO TUBE PRE AMPLIFIER
LEFT INPUT

1B
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: [phone] FAX: [phone]
D1100 Digital Preamplifier Input and Control Connection Diagram (when used as a stand alone Preamplifier)
Turntable with Moving Coil Cartridge
IR Sensor
WLAN ANT 1 WLAN ANT 2
Digital Audio Player
AM/FM Tuner
Media Server
SACD/CD Transport
Note: Refer to the D1100 Owner’s Manual page 9 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
Phono Preamplifier
Computer
To Power Amplifier
Power Control In
For connection to an Analog
Recording Device or another
component with an Analog
Audio Input
For connection to an Analog
Recording Device or another
component with an Analog
Audio Input