McLelland AVD-800P User manual

Touch sensor
AVD-800P/ MAP-1200 KEYPAD(eur)
Interface Design
2.SELECT Key
1.POWER Key
3.MUTE Key
4.UP Key
5.DOWN Key
7.IR Sensor
6.LCD Display
(Unit: mm)
95*86
70*70
86
86
SELECT MUTE
AVD-800P
MUTE

95*86
70*70
SELECT MUTEMUTE
95*86
70*70
SELECT MUTEMUTE
95*86
70*70
SELECT MUTEMUTE
95*86
70*70
SELECT MUTEMUTE
95*86
70*70
SELECT MUTEMUTE
POWER Key- to switch the keypad on and off
SELECT Key
MUTE Key
.
.
.
Instructions
95*86
70*70
SELECT MUTEMUTE
95*86
70*70
SELECT MUTEMUTE
95*86
70*70
SELECT MUTE
AVD-800P
MUTE
V o l 1 0 V o l 1 0
T r e b 1 0
B a s s 1 0
V o l 1 0
AVD-800P
V o l 1 0
When the power is off, touch the”POWER”key to turn the power on, all back lights on (blue), display shows AVD-800P or MAP-1200.
When the power is on, touch and hold the “POWER” key for 2 seconds to turn the power off. ”POWER” key back light turn into red and all
others back lights off.
Touch”SELECT”key once, Channel selection, first ICON on the LCD on, press the ”UP” , “ DOWN” arrow to select channel, LCD
display shows CH 1, CH 2, ……
Touch “SELECT” key again, Volume adjustment, second ICON on the LCD on, press the ”UP”, “DOWN” arrow to adjust volume, LCD
display shows Vol + “value”.
Touch “SELECT” key again, Treble adjustment, third ICON on the LCD on, press the ” UP” , “ DOWN” arrow to adjust treble, LCD
display shows Treb + “value”.
Touch “SELECT” key again, Bass adjustment, third ICON on the LCD on, press the ”UP”, “DOWN” arrow to adjust Bass, LCD display
shows Bass + “value”.
Touch to activate mute function, fourth ICON on the LCD on, LCD display shows MUTE. Press again, Mute deactivate, music back
and LCD turns to Volume.
Remark: If Keypad is not being touched after 8 secs, it will switch to “Volume” page.