MCM Electronics ITB174 User manual
iLive | ITB174
Quickstart Guide
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
Power & Input Modes
Using the ITB174 Sound Bar
Bluetooth
Connecting your sound bar wirelessly using Bluetooth
Plug the small end of the power cord into the DC Input on the back
of the speaker, and the large plug into a standard wall outlet.
Indicator Lights
Power
STATUS INDICATOR
Power O Red Light
Line In Mode Green Light
Optical Mode Amber Light
Aux In Mode White Light
Bluetooth Pairing Flashing Blue Light
Bluetooth Connected Blue Light
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the button on the remote to switch to Bluetooth Mode, indicated by a slowly
ashing blue light.
3. Press and hold the Pair button on the side of the unit.
The pairing indicator will ash blue quickly. When pairing, remain within 3 feet
of the unit.
4. Using the native controls on your Bluetooth device, select the ITB174 in your Bluetooth
settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and connecting
Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the Pairing
Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat
the above steps.
iLive | ITB174
Quickstart Guide
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
The Learn Feature
Teach your sound bar to recognize commands from a single remote
What is the learning feature?
The learning feature captures remote commands from your
television remote, and teaches your bar speaker to operate when
these commands are pressed. Power, volume and mute are a few
examples of commands that the bar speaker can learn.
Why use the learning feature?
Teaching the bar speaker remote commands will reduce the number
of remotes needed, save time searching for remote codes, and
improve the ease of operation.
ITB174
Remote
Sample
Remote
1. With the power O, press the Learn
button on the unit.
2. Press the button you desire to be
learned on the included remote.
For example: Volume+
3. Press the corresponding button on
your remote.
4. Press the Learn button on the unit.
The programmed button on your
remote will now be able to control
your sound bar.
Using the Learn Feature
Other MCM Electronics Speakers manuals
