Mede8er MEDX2KEY User manual

User Instructions
Enter
Play/
Pause
Back
Light
Return
TM
Info/
About
MEDX2KEY
TM
Wireless USB 2.4 Ghz Keyboard

INDEX
page 1
page 2
page 3
page 4
page 5
General Overview / Charging the keyboard
Connecting the USB Receiver
General Operation
Using the Keyboard
Warranty

Red LED
‘off’ -- battery ok
‘flashing’ -- low battery
Yellow LED
‘on’ -- charging
‘off’ -- fully charged
Plug in the supplied USB Mini
connector into the side of the
keyboard unit and plug the USB
male into your Mede8er’s USB
host port or the USB port on
your PC.
USB Charge Cable
Charging the Battery
Curser Speed Return Arrow Keys
Left Mouse
Button
Right mouse
Button
On/Off
USB Mini
Charge
Connector
General Overview
Back Light Play / Pause
Enter
LED Status Display
Plug into USB host port
pg 1

MEDX2KEY
Wireless USB 2.4 Ghz Keyboard
Sanji Electronics (Pty) Ltd 106 16th Road, Midrand, Gauteng, South Africa.
Tel [phone] E Mail: [email protected]
Europe: I Tel: [phone]. Trade: [e-mail]
Warranty and support: [e-mail]
BDL BV. Fermiweg 9-11, 3208KT Spijkenisse, Netherlands.
Mede8er_medx2key_user_rev3
www.mede8er.com www.mede8er.eu
www.mede8erforum.com
For more information or support please visit
www.mede8er.eu/support/
or call [phone] during business hours.
* Specifications subject to change without notice.

USB Receiver
The range of the keyboard can be effected by metal content so we
suggest that the USB receiver be placed away from the player or any
other metal object. Unclip the USB receiver from the keyboard and
plug in into the USB Female connector. Plug the male USB into one
of the USB host ports on the Mede8er. Position the USB Receiver as
far away from the player as possible with clear sight to the keyboard.
USB FemaleUSB Receiver
The red RF LED should remain ‘off’ when the
keyboard has a good connection to the receiver.
A flashing red RF LED indicates a loss of signal
between the keypad and the receiver.
Connecting the USB Receiver
Red LED
‘off’ -- good rf connection
‘flashing’ -- no rf connection
USB receiver cable
pg 2

Caps Lock - Red LED Solid
Reset Button
Curser Speed Adjust
Press the Curser Speed adjust button and the curser speed will
change to the next speed. Available speeds High - Medium - Low
Keyboard Reset
The Keyboard can be reset to default operation in the event of
incorrect system operation. To reset the Keyboard press the reset
button for 3 seconds.
Back Light Function
Press the Back Light button to light up the keyboard.
The Back Light will automatically switch off 30 seconds
after the last keyboard stroke. You can also switch it off
manually by pressing the Back Light button.
The caps lock LED will light
solid red when in caps lock
mode.
Auto Shut Down
The keyboard will automatically shut down if no keys are pressed
within a 5 minute period.
pg 3

Using the Keyboard
The preferred way of using the MEDX2KEY for Internet Media
browsing is to hold the keyboard with both hands. Use your left thumb
to control the left/right mouse buttons and your right thumb to control
the trackball and the arrow buttons.
ESC: RETURN
SPACE: PLAY
ENTER: SELECT(ENTER)
'0': 0
'1': 1
'2': 2
'3': 3
'4': 4
'5': 5
'6': 6
'7': 7
'8': 8
'9': 9
'-': VOL_DOWN
'+': VOL_UP
'P': SHIFT + ‘P’ = POWER OFF
'R(r)': REPEAT
'T(t)': SUBTITLE
'I(i)': INFO
'A(a)': AUDIO
'G(g)': GOTO
'H(h)': HOME
'Z(z)': ZOOM - Media Library
'Ctrl': ZOOM - Internet Browser/YouTube
',(<)': FRWD
'.(>)': FFWD
'/(?)': Info / About
'F(f)': Favourite
'E(e)': EDIT
'M(m)': MENU
'S(s)': Setup
'V(v)': View
'L(l)': AB
'\(|)': SLOW
'’(”)': STOP
'/(?)': Info / About
'[({)': Back Skip
'](})': Forward Skip
'B(b)': Browser - Devices
'Alt': Mute
'FI': Red button
'F2': Green button
'F3': Yellow button
'F4': Blue button
'F5': TV Sys
'F6': Previous Chapter
'F7': Next Chapter
Keyboard Commands
pg 4

Warranty
Mede8er products carry a 24 month from date of purchase warranty. In the
event of warranty service please provide proof of purchase. Return your
product to the store that it was purchased from or return it directly to Sanji
Electronics (Pty) Ltd 106, 16th Rd Midrand, Gauteng, South Africa.
Warranty does not cover damage by
a) Lightning or over voltage
b) Water damage or liquid spill
c) Misuse or abuse
d) User tampering
Sanji Electronics is not responsible for any loss of data irrespective of the
cause.
Important Safety Instructions
·Read these instructions for all components before using this product.
·Do not use this apparatus near water or moisture. Do not use this product near
a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a
swimming pool, or anywhere else that water or moisture are present.
·Clean only with a soft dry cloth and as directed by the manufacturer.
·Do not use near any heat sources, such as radiators, heat registers, stoves or
other apparatus that produce heat.
·Only use attachments or accessories specified by the manufacturer.
·Unplug this apparatus during lightning storms or when unused for long periods
of time to prevent damage to this product.
Refer all servicing to qualified service personnel
pg 5