Media BR10 User manual

bluetooth Receiver BR10
Manual
Thank you for purchasing our
bluetooth receiver ! Please read the
manual carefully before use!
I. Schematic illustration
II. Product features
1. bluetooth V5.1
2. Automatically connect the paired
bluetooth device after power on
3. Five minutes no device connection,
automatic shutdown
4. Built-in 240MA rechargeable battery,
environmental protection and energy
saving
5. Play time: about 9 hours after full charge
6. Support bluetooth DSP technology of
stereo music
7. Aux output
8. Voice broadcast caller number
9. Private answer
10. bluetooth playback distance within 10
meters of barrier-free
III. Operating instructions
1. Pairing for the first time: Insert the audio
adapter into the audio output hole, and plug
the other end into the audio input hole of
loudspeaker, or the aux port of car audio.
2. Power on/off
Long press“ ”3 seconds to power
on,the blue light flashing quickly, enter
bluetooth searching.
3. Bluetooth pair
Open bluetooth of phone,search
“ BR10 ”and connect, after the pairing is
successful, prompt “bluetooth connection is
successful”,and the blue light flash slowly.
4. Use bluetooth hands-free calling

·Press“ ”to answer/ hang up.
·Long press“ ”two seconds to reject
call.
·Double click“ ”to call the last calling
number in your log
·During call, long press the“ ”button
for 2 seconds to switch between the phone
and bluetooth
5. Play music via bluetooth
·Short press“ ”for pause/play.
·Short press“ ”for last song, long
press for volume +, max volume have
prompt.
·Short press“ ” for next song, long
press for volume -
6. Automatic shutdown
It will automatically shut down if without any
device connection or any operations within
5 minutes.
7. Charging
The red light is always on when charging;
light goes out when it is fully charged.
8. Low voltage alarm
When the battery power is too low, the red
light flashes and the voice prompts "low
power" every minute, it will automatically
shut down at the fourth time. shut down
directly when the battery voltage is lower
than 3.2V
IV. Troubleshooting:
No
response
on power
.Long press the power button
again
.Plug in the charging cable to
charging it for 5 minutes
before turning it on
Can't
play
. Make sure the connected
device is working properly
. Disconnect bluetooth, re-
pair bluetooth again
·Is the audio cable plugged
in properly
Can’t
charge
. Please pull out the charging
cable and re-insert it
. Try another charger
V. Warm tips:
1. Do not use this product in a dusty and
humid environment with extremely high and
low temperatures.
2. Do not drop the product to avoid surface
damage or breakdown.
3. Do not disassemble the product,if you
have any questions, please contact your
dealer
4. Due to continuous improvement and
enhancement of technology,changes in
product performance and functionality are
subject to change without notice.
VI. Packaging
1. Main product
2. Audio cable
3. Audio connector
4. Charging cable
5. Manual