Megavoice Solar Speaker User manual

Solar Speaker // Quick Start Guide
For more information and a full user manual, please visit https://kvisit.com/VQ/ueC0AQ/Aw
Main LED - Indicates status: On/O and Mode (Blue: BT
Connectivity // Red: Auxilliary).
Power - Hold for 2 seconds to turn On/O. Click to check the
battery level and/or to initiate the external device charging.
Mode - Click to switch between BT and Auxilliary mode.
In BT mode – press and hold to disconnect from a paired BT
device.
Volume Down/Up - Click or hold to lower/raise the volume level.
Chapter Rewind/Forward - Click to navigate to the previous/
next file (BT mode only!).
Play/Pause - Click to play/pause the playback (BT mode only!).
LED Indicators - Indicate the battery level. Charge Out (Solid) //
Charge In (Blink).
1
2
3
4
5
6
7
Press for 2 seconds to turn the Solar Speaker On/O (a chime
will play).
SOLAR SPEAKER
7
6
5
4
2
1
3
5

Solar Speaker // Quick Start Guide
Auxiliary Cable Jack - 3.5mm Stereo/Mono capable connection for
external devices (Auxiliary mode only!).
Restart Button - Insert a paper clip and click to restart the Solar
Speaker.
USB-A (Charge Out) - Insert a USB-A cable to charge an external
device - click on if charging does not initiate automatically.
USB-C (Charge In) - Insert a USB-C cable from an external charger
(5VDC, 2A) to charge the Solar Speaker.
8
9
10
11
8
9
10
11
Charge-In - from a wall charger/computer to Solar
Speaker’s USB-C port.
Charge-Out - from Solar Speaker’s USB-A port to an
external device.
Solar Charging - Make sure the Solar Speaker’s solar panel
has a clear view of the sun.