Mellerware MARCO ALDANY MA20050 User manual

Precisione Beard Trimmer
Model:
MA20050
PLEASE READ ALL INSTRUCTIONS BEFORE USE
MA_20050_IM.indd 1MA_20050_IM.indd 1 5/28/2010 11:46:15 AM5/28/2010 11:46:15 AM

Dear customer,
Many thanks for purchasing a MELLERWARE product. Thanks to its technology, design and operation
and the fact that it goes through strict quality controls - we feel sure you will be entirely satisfied.
Description
A Interchangeable blade with 26mm cutting grade
B Interchangeable blade with 5mm cutting grade
C On/Off switch
D Charge-up battery indicator
E Charger
F Adaptor
G Comb guide #1
H Comb guide #2
I Comb guide #3
J Comb guide #4
K Comb guide #5
L Cleaning brush
M Bottle of lubricating oil
F
L
AB
M
C
E
D
G H I J K
MA_20050_IM.indd 2MA_20050_IM.indd 2 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM

Fig. 1 Fig. 2
Fig. 3 Fig. 4
Safety advice and cautions
Read these instructions carefully before switching
on the appliance and keep them for future refer-
ence. Failure to follow and observe these instruc-
tions may result in an accident.
Electric safety
- Do not use the appliance if the cable or plug is
damaged.
- Ensure that the voltage indicated on the name-
plate matches the mains voltage before plugging
in the appliance.
- The appliance’s plug must fit into the mains sock-
et properly. Do not alter the plug. Do not use plug
adaptors.
- Only use the appliance with the specified base /
electric plug, provided with the appliance.
- If any of the appliance’s casing breaks, immedi-
ately disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it has
a leak.
-WARNING: Keep the appliance dry.
- WARNING: Do not use the appliance near water.
- Do not use the appliance with damp hands or feet,
or when barefooted.
- Do not force the electrical wire. Never use the
electric wire to lift up, carry or unplug the appliance
/ charger.
- Ensure that the electric cable does not get trapped
or tangled.
- Check the state of the electrical connection cable.
Damaged or tangled cables increase the risk of
electric shock.
- Do not touch the plug with wet hands.
MA_20050_IM.indd 3MA_20050_IM.indd 3 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM

Personal safety:
- Take the necessary measures to avoid starting the
appliance involuntarily.
- Before using the appliance ensure that the tool is
properly fixed in place.
- Do not touch any of the appliance’s moving parts
while it is operating.
Use and care:
- Fully unroll the appliance’s power cable before
each use.
- Do not use the appliance if the parts or accesso-
ries are not properly fitted.
- Do not use the appliance if joinable accessories
are faulty. Replace them immediately.
- Do not use the appliance on wet hair.
- Do not use the appliance if the on/off switch does
not work.
- If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains when
it is not in use, even if it is only for a short while, as
proximity to water involves a risk, even if the appli-
ance is disconnected.
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning task,
adjustment, charge-up or change of accessories.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
- This appliance is intended for adult use. Ensure
that this product is not used by the disabled, chil-
dren or people unused to its handling.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not use the appliance on pets or animals.
- Do not leave the appliance resting on surfaces
when it is still switched on.
- This appliance was oiled during the manufactur-
ing process. To maintain the appliance in good
working conditions, we recommend that you oil the
blades each time the appliance is cleaned, by plac-
ing some drops of oil on the ends of the blades and
turning the appliance on for a few seconds.
- Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer’s
liability null and void.
Charging the battery
Warning: The new battery does not come com-
pletely charged and must be charged up to the
maximum before using the appliance for the first
time.
- Charge the battery at room temperature between
4 and 40ºC.
- Connect the charger to the mains.
- The time needed to charge completely is 14 hours
approximately. Never try to overcharge the batteries
(although it is recommended that the batteries are
charged for 16 hours for the first time).
- While the battery is charging, the pilot light will
come on indicating that the charger is charging the
battery. Instructions for use
Please take the following precautions prior to use:
- Ensure that all packaging material has been re-
moved from the product.
- It is important to fully charge the batteries before
using the product for the first time.
- Adjust the appliance so that it will perform the func-
tion that you wish to use.
Accessories:
- Interchangeable permanent blade with 26 mm
grade cut: for areas of beard, side burns, nape of
neck, etc.
- Interchangeable permanent blade with 5 mm grade
cut: for small sections of the cut, this blade is ideal
for shapes or raised outlines.
- Guiding combs: 5 guiding combs according to the
choice of cut you want to carry out.
Inserting a guide comb:
- Grasp the guide comb by both ends, and press it
against the blades (Fig. 1).
- In order to extract the guide comb, simply pull it
out. (Fig. 1).
Use:
- The appliance can be plugged into the mains or
used with batteries.
- Plug the appliance into the electric mains socket.
- Start the appliance by pressing the stop/go switch.
How to cut hair
- Situate the person whose hair you are going to
cut so that the top of their head is at your eye level.
Place a protective towel or cloth around their neck.
- To obtain best results it is better to use the appli-
ance on dry hair, as it is much easier to control the
hair and the result.
- Comb hair well before cutting. Make sure that there
are no tangles or knots.
- Hold the appliance in a calm and relaxed manner
in order to ensure maximum control of the cut and a
uniform result. Proceed to use short cuts gradually
MA_20050_IM.indd 4MA_20050_IM.indd 4 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM

going around the head.
- Leave the hair a little longer than the desired
length as it can always be altered later.
- While working adapt the comb/comb guide to the
desired length.
- At regular intervals, stop cutting in order to comb
the hair and check the results so far.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains if it was con-
nected to the mains.
- Return the appliance to the charger if used with
battery power.
- Clean the appliance.
Cleaning:
- Disconnect the appliance from the mains and al-
low it to cool before undertaking any cleaning task.
- Clean the device BODY with a damp cloth that has
been administered a couple of drops of detergent.
Dry afterwards.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Clean the blades and the comb guides with the
cleaning brush. Remove the hairs form the blades
and from within the appliance using the brush. It is
important to clean off all the hairs after each use.
- If the appliance is not kept in a clean condition, its
surface can deteriorate and badly affect the prod-
uct’s shelf life, provoking a potentially dangerous
situation.
Anomalies and repair
- Take the appliance to an authorised technical
support service if problems arise. Do not try to dis-
mantle or repair without assistance, as this may be
dangerous.
- If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.
Ecology and recyclability of the product
- The materials of which the packaging of this ap-
pliance consists are included in a collection, clas-
sification and recycling system. Should you wish to
dispose of them, use the appropriate public con-
tainers for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.- This symbol means that; should you
wish to dispose of the product once its working life
has ended, take it to an authorised waste agent for
the selective collection of Waste from Electric and
Electronic Appliances (WEEA).
- The product may include a battery or batteries;
the user must remove them before disposing of
the product. Remember that batteries must be dis-
posed of in duly authorised containers. Do not dis-
pose of them in fire.
How to remove the batteries from the inside of
the appliance:
Warning: It’s important that the batteries are com-
pletely de-charged before removing from the appli-
ance.
To remove the batteries once the appliance life
has come to an end, follow the instructions:
- Open the bottom outside casing of the appliance,
removing the screw that keeps everything in posi-
tion beforehand. Remove the blade, extracting the
two screws that are located on the upper part of the
bottom outside casing (Fig 2).
- Remove the upper casing of the appliance (Fig.
3).
- Locate the battery and cut the wires (red and
black). To minimize the risk of short-circuiting the
appliance with the possible residual battery charge,
first cut the red wire and protect its conductive part
with insulating tape. Next, cut the black wire in the
same way (Fig 4).
- Safely remove the battery from where it is kept.
Characteristics:
- Degree of protection: IPX0
- Acoustic pressure level: < 60dB(A)
NB: These characteristics can be subject to change
without prior warning, for the purpose of improve-
ments made to this product.
This appliance complies with Directive 2006/95/EC
on Low Voltage and Directive 2004/108/EC on Elec-
tromagnetic Compatibility.
MA_20050_IM.indd 5MA_20050_IM.indd 5 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM

MA_20050_IM.indd 6MA_20050_IM.indd 6 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM

MA_20050_IM.indd 7MA_20050_IM.indd 7 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM

27 Nourse Avenue Epping 2 Cape Town
P.O. Box 975 Eppindust 7475 South Africa
Tel: [phone] Fax: [phone]
Service Centre Share Call: 086 111 5006
web: www.creativehousewares.co.za
MA_20050_IM.indd 8MA_20050_IM.indd 8 5/28/2010 11:46:33 AM5/28/2010 11:46:33 AM