Memorex MVD2033 User manual

Is it live or is it Memorex? ™
MVD2033
_ User^s Guide
DVDA/CD/MP3/PHOTO CD Player
nn i D OLBYl
DIGITAL
dts
DIQI iAl I
Before operating this product,
please read these instructions completely.

CONTENTS
Contents. '
Important Safety Instructions.2
Precautions.5
Power Source.5
Location of Controls.6
• Front.6
• Rear.6
• Remote.7
Remote Control.8
• Battery Installation.8
• Effective Distance of the Remote
Control Transmitter.8
Connection.9
• Connecting the DVD to a TV Using the
Audio/Video Output Jacks.9
• Connecting the DVD to a TV Using the
S-Video Output Jack...9
• Connecting the DVD to a TV Using the
Y/PB/PR Jacks......10
• Progressive (Y, PB, PR) VIDEO OUT.10
• 526 Line Digital Progressive-scan Component
Video Output.10
• Connecting the DVD to a Home
Theatre System;.11
About Discs...12
Setup Menu.14
• General Setup Menu.15
• Speaker Setup Menu.16
• Dolby Digital Setup Menu.17
• Preferences Menu.17
Basic Operation.20
• 3D Sound...-20
• Audio Mode.20
• Mute.20
• Display.20
DVD Basic Operation.21
• Playback of a DVD. 21
• Skip. 22
• Search.22
• Slow/R and Slow/F.22
• Pause/Step.22
• Title/Chapter Search.23
• Title/Time Search.23
• Repeat Playback.23
• A-B Playback.23
• Audio Menu.24
• Subtitle Menu. 24
• DVD Menu.24
• Title Menu.24
• Zoom.24
• Angle...24
MP3 BASIC OPERATION...25
• Playback of an MP3.25
• Selecting Folders/Tracks using the SKIP
Buttons....26
• Selecting Folders/Tracks using the
Number Buttons.26
• Forward/Reverse.26
• Repeat Play.26
• MP3 FAQs.26
CDA/CD BASIC OPERATION.27
• Playback of a CDA/CD.27
• Selecting Tracks/Files using the
Number Buttons.27
• Selecting Tracks/Files using the SKIP
Buttons.27
• Forward/Reverse.28
• Repeal One/All Play.28
• Repeat A-B Play.28
• Random Playback.28
• Programmed Playback.29
• PBC (VCD Only)... 29
PICTURE CD BASIC OPERATION.30
Troubleshooting Guide.31
Care and Maintenance....33
Specifications.34
1

IMPORTANT SAFETY INSTRUCTIONS
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
A ine lightning tiash with arrowhead symbol,
within an equilateral triangle is intended to alert
/\ the user to the presence of uninsulated
/ ^ \ dangerous voltage within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
yj|\ triangle is intended to alert the user to the
/ ■ \ presence of important operating and
/ * \ maintenance (servicing) instmclions in the
literature accompanying the appliance.
CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A
LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT.
PLEASE READ THIS OWNER'S MANUAL CAREFULLY
AND RETAIN FOR FUTURE REFERENCE. SHOULD
THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION-SEE SERVICE
PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM,
DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM,
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE. USE THE
RECOMMENDED ACCESSORIES ONLY
SURGE PROTECTORS:
It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT
covered under warranty for this product.
FCC NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential Installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmfril interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to fry to
correct the interference by one or more of the following
measures:
* Reonent or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
* Connect the equipment Into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
To assure conliriued compliance, follow the attached
InstallaHon instructions and use only shielded cables
when connecting to other devices. Also, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
2

IMPORTANT:
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS
PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated
2. RETAIN INSTRUCTIONS
The safety arid operating instmctions should be retained for future reference
3. HEED WARNINGS
All warnings on Uie product and in the operating instructions should be adhered to
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners Use a damp
cloth for deaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub, washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold svith the product Any mounting of the product should follow the
manufacturer's Instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfeces may
cause the appliance and cart combination to overturn. ^
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in instaJIation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to
10. POWER SOURCES
fyps of power source indicated on the marking, label. If.you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company, For products intended to
operate from battery power, or other sources, refer to the operating instructions
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. TTiis is a safety feature, if you are unable to insert the plug fully into
toe outlet, try reversing the plug. If toe plug should still fail to fit, contact your electrician to replace your obsolete outlet
Do not defeat toe safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
toe appliance.
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care
3

-I. ^ touching such power lines or circuits as contact with them might be fatal
15. OVERLOADING
-e overload wall outlets and extension cords as this can result in a risk of fire or electric shock
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product
17. OUTDOOR ANTENNA GROUNDING ^
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code. ANSI/NFPA 70
provides infonriation with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes, and requirement for groundinq electrode
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
ooier hazards. Refer all servicing to qualified service personnel
19. REPLACEMENT PARTS
required, be sure the service technician uses replacement parts specified by the
man^ctrer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire
elecmc shod? or other hazards.
20. SAFETY CHECK
service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
22 D^TmAOE RECWIRIffG^RTOE ^ ce'>fng only as recommended by the manufacturer.
a^ product from the wall outlet and refer servicing to qualified service personnel under the following conditions-
a. When the power-supply cord or plug is damaged.
b. If liquid has been spiled, or objects have fellen into the product.
c. If the product has been exposed to rain or water.
d If the product does not operate normally by fallowing the operating instructions. Adjust only those controls that are covered
h ^ ^ Jnstructions. as an adjustment of other controls may result in damage and will often require extensive work
by a qualffied technician to restore the product to its normal operation.
e. If the product has been drop^jed or the cabinet has been damaged.
f. When ti^e product exhibits a distinct change In performance - this indicates a need for service
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC foat provides
Praper grounding a_nd. in particular, specifies that the cable ground shall be connected to theproundino
system of the building, as close to the point of cable entry as practical.
_ .iNTC>JNA
LEAD IN
WRE
OISCKARGEUNIT
(NEC SECTION fl1O.20|
GROUNDING CONDUCTORS
(!«CSECT10N81C>-21|
fiEC - NATIONAL ELECTRICAL CODE
GROUND CLAMPS
PObVER SERVICE GROUNDING
ELECTRODE STS71M
(NECARTJSO, PART HI
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
4

PRECAUTIONS
NOTES ON HANDLING:
• When shipping the DVD player, always use the
original shipping carton and packing materials. For
maximum protection, repack the unit as it was
originally packed at the factory,
• Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
• The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not a malfunction.
• When the DVD player is not in use, be sure to remove
the disc and turn off the power.
• If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
NOTES ON LOCATING THE DVD PLAYER:
• When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
* For stubborn dirt, soak the cloth In a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.
• If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.
NOTES ON MOISTURE CONDENSATION
Moisture condensation damages the DVD player.
Please read the following carefully.
' Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass, In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the DVD
player.
• Moisture Condensation occurs during the following
cases:
•When you bring the DVD player directly from a cold
place to a warm place.
•When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit,
•In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
•When you use the DVD player in a humid place.
Do not use the DVD player when moisture
condensation may occur.
• If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for two
or three hours. After two or three hours, the DVD player
and evaporated any moisture. Keep
the DVD player connected to the wall outlet and moisture
condensation will seldom occur.
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet havina 12QV
60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user's responsibility to have an electrician replace the obsolete
outlet.
\
AC Outlet
\
AC Plug
5

LOCATION OF CONTROLS
FRONT
1. STANDBY Button
2. STANDBY Indicator
3. Disc Tray
4. OPEN/CLOSE Button
5. STOP ( ■ ) Button
6. SKIP and ( ► «) Buttons
REAR
7. PApSE (II) Button
8. PLAY ( ► ) Button
9. Remote Sensor
10. Display
1. Stereo Audio Left/Right Output Jacks
2. Video Output Jack
3. S-Video Output Jack
4. Coaxial Digital Audio Output Jack
5. Component Video (Y, PB, PR) Output Jacks
6. PROGRESSIVE SCAN ON/OFF Switch
7. AC Power Cord

LOCATION OF CONTROLS (CONTINUED)
REMOTE
4
5
6
7
8
9
10
11
12 •
13 -
14 -
15 ■
16 -
17 -
18 -
19 -
20 -
£
□ C=]
CZl
•21
22
a C=) C3-
-23
•24
•25
26
27
—I
•E~3 Cp 13
Q CP C3-
eiD
-28
-29
-30
-31
-32
■ 3 3
-34
■ 3 5
•36
1. DISPLAY Button
2. Number (0-9) Buttons
3. TITLE MENU Button
4. 3D Button
5. ANGLE Button
6. SETUP Button
7. Navigation (A) Button
8. Navigation (^) Button
9. PLAY ( ► ) Button
10. Navigation (T) Button
11. RETURN Button
12. PBC Button
13. SEARCH Button
14. SLOW/R Button
15. STOP { ■ ) Button
16. PAUSE/STEP Button
17. SKIP (M^) Button
18. RANDOM Button
19. SEARCH « Button
20. MUTE Button
21. OPEN/CLOSE Button
22. STANDBY Button
23. DVD MENU Button
24. CLEAR Button
25. AUDIO MENU Button
26. SUBTITLE MENU Button
27. ZOOM Button
28. AUDIO MODE Button
29. Navigation ( ► ) Button
30. ENTER Button
31. PROGRAM Button
32. SLOW/F Button
33. SKIP ( ► «) Button
34. SEARCH Button
35. Repeat A-B Button
36. REPEAT Button

REMOTE CONTROL
BATTERY INSTALLATION
1 • Open the battery compartment cover by sliding it out.
2. Install two (2) “AA” batteries (not included), paying attention to the
polarity diagram in the battery compartment.
3. Replace the battery compartment cover.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when Installing the batteries as indicated next to the battery compartment.
Reversed batteftes may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones,
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or Injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer's directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
UOTBS:
• When there is an obstacle
between the DVD and the
transmitter, the transmitter may
not operate.
• When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the DVD, die
remote operation may be
unstable.
8

CONNECTION
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y" connector may be necessary. Visit your local electronics supply store.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
• Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
• After connecting, press the AUDIO MODE button to the desired audio setting.
9