Memorism CS7 User manual

HAIR CLIPPER SET
Model: CS7
USER MANUAL
Please read the instructions before use and keep for future reference.

CONTENTS
Introduction
Important Safety Instructions
Battery Recycling
Parts Identications
Specication
Charging Methods
LED Indicator Description
How to Use
Cleaning and Maintenance
Danger
Limited Warranty
···································································01
·······································01
··························································02
······················································02
··································································03
························································03
············································04
····································································05
··········································07
···········································································07
··························································08
www.mymemorism.com

INTRODUCTION
Congratulations on your purchase and welcome to Memorism!
To fully benet from the support that Memorism offers, please register
your product at www.mymemorism.com/register.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance basic precautions should always
be observed, including the following. Read all instructions before
using this appliance.
WARNING
To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately
after using.
2. Do not press the blade against the skin.
3. Do not use the product to trim pet hair or fur.
4. Clean out any dust or hair away from the power plug regularly.
5. lt is a normal that main body of the clipper will emit mild heat.
6. Close supervision is necessary when this appliance is used on or
near children or persons with special needs or disabilities.
7. Use this appliance only for its intended use as described in this
manual.
8. Keep the cord away from heated surfaces.
9. Never operate this appliance if it has a damaged cord or plug, if
it is not working properly, or if it has been dropped or damaged.
If any of these things happen, contact customer support.
10. Warning: Class A equipment is intended for use in an industrial
environment.
In the documentation for the user, a statement shall be included
drawing attention to the fact that there may be potential difculties
in ensuring electromagnetic compatibility in other environments,
due to conducted as well as radiated disturbances.
www.mymemorism.com

BATTERY RECYCLING
When your rechargeable clipper reaches the end of its useful life, the
Lithium-ion batteries must be removed and recycled or disposed of
properly in accordance with your local and state requirements.
PARTS IDENTIFICATIONS
www.mymemorism.com

CHARGING METHODS
1. Insert the charger into the bottom socket of the clipper to charge.
2. Place the hair clipper into the charging base, then insert the charger
into the charging base.
Note
1. Clipper must be turned off to charge.
2. The charging indicator ashes when the clipper is in low battery.
3. The charging indicator is on when the clipper is charging.
4. Charge for 3 hours before rst use. The clipper will be fully charged
in 3 hours. A full charge provides 4 hours of cordless use.
5. Do not allow to charge for an extended period of time.
www.mymemorism.com
SPECIFICATIONS
03
Product Name
Model
Motor
Battery Type
Charging Time
Running Time
Adapter
Weight
Size
Hair Clipper Set
CS7
5V
2000mAh Li-ion
3 hours
4 hours
Input: 100-240V 50-60Hz 0.2A
Output: 5.0V 1000mA
7.9 oz
6.7 x 2.6 x 1.5 inches

LED INDICATOR DESCRIPTION
Constant Speed
Press once to increase 0.5K RPM, range from 5.0 to
7.0 RPM.
Press multiple times, it will cycle back to the beginning
speed for choice.
Level
Level 1-5 correspond to speed 5.0, 5.5, 6.0, 6.5 and
7.0 RPM.
Available Time
Indicate the available operating time left on the battery.
Oil Reminder
After using the clipper more than 120 minutes, the oil
indicator will ash for 30s to remind you to oil the cutter.
Charge Reminder
When the available time less than 18 minutes, the charge
indicator will ash to remind you to charge the clipper.
www.mymemorism.com
04
6. If the clipper has not been used for a month or longer, it is advisable
to recharge it for 3 hours.
7. Charge the clipper at temperatures between 34OF-104OF.
8. Clipper can be used by connecting the charging cable when the
clipper is out of battery.

www.mymemorism.com
HOW TO USE
On / Off / Speed
Power ON: Press the button once.
Power OFF: Hold the button for 2 seconds.
Speed Adjustment: Every time you press,
it will change to different cutting speed.
Push the adjust switch to adjust the blade
length.
Left: 2.4mm Mid: 1.6mm Right: 0.8mm
Note: The shortest haircut length is 0.8mm.
Cutting Length Adjustment
1. Adjust blade length
2. Use a guide comb with desired length
1 Grab the sides of the comb and align the position of the blade
and the comb.
2Press the guide comb until it clicks into place.

www.mymemorism.com
06
1 Pull the snap tab on the back of the guide comb.
2Slide the guide comb out.
Note: Do not press the comb teeth as this may damage the comb.
1 Press the adjust switch to the bottom.
2 Hold the main body, place your thumb against the blade and then
push the blade away from the main body.
1 Rotate the straight shaft to the middle position.
2 Insert the bottom of the blade (A) into the slot (B).
3Press the blade down until it clicks into place.
Remove Guide Comb
Remove Blade
Install Blade

CLEANING AND MAINTENANCE
DANGER
www.mymemorism.com
07
1 Do not disassemble the main body.
2 Do not clean the product with chemicals.
3Do not store in temperatures above 104ºF and under 32ºF.
4 Do not immerse the main body in water. Use a soft and slightly
damp cloth to wipe the main body.
5 Do not allow any liquid to get inside the appliance.
1 Turn off the Clipper and brush off any hair trimmings from the
main body and from around the blade.
2 Remove the blade and clean the blade under running water with
the cleaning brush after each use.
3Dry the blade and drop oil on to the cutters by the points.
*For a good and long-lasting cutting performance it is important to oil the
cutters frequently.
4Install the blade to the clipper. Remember to adjust the blade to
0.6mm before installing the blade.