Metabo B E 622 S-R+L - User manual

92 |
DRILLS
ENGINEERING
RESULTS FOR
INDUSTRIAL
NEEDS.
The Metabo rotary drill range is designed and built to meet the
needs of the industrial world. Be it for applications in wood,
metal, plastic, liquids, ceramic or masonry Metabo has a drill
in the range to suit. This versatility results from the use of
quality components, high manufacturing tolerances and high
quality standards throughout the manufacturing process. With
a Metabo you can be sure it will deliver engineering results
demanded by industry. Metabo. Work. Don’t play.

| 93
DRILLS

94 |
Marathon motor
with coil guard
Expertly machined and
balanced motors use
high grade coppers and
steels, increase efficiency
and provide optimum
performance. Thick resin
coatings on the armature
and field coil protect the
motor from harmful
debris, increasing
service life.
DRILLS
ROTARY ONLY – FOR THE SPECIALIST.
Rotary only drills are usually considered as specialist
machines, however Metabo‘s vast range can cover a
whole host of applications. This class are in their element
for high tolerance drilling in wood, plastic and metal.
Small high speed models come into their own for those
repetitive small jobs where as high torque models are
ideal for use with diamond cores, torque screws, augers
and paddles etc. Whatever the application, with Metabo
you will always find the right machine for the job.
Special areas of application
Even when working at places difficult
to reach, Metabo drills can be used
without problems.
Special areas of application
Drills with high torque are not only
suitable simply for drilling, but can
also be used for stirring thick fluids
such as gypsum, joint fillers, ready-
made plaster or tile adhesive.
Ergonomic design
Ideal adaptation of the design
to the user’s needs that enables safe,
comfortable and fatigue-free work.
Hexagon socket
in the spindle
The screwdriver bit can
be inserted directly into
the spindle.
Metabo quick-action
keyless chuck
Simple and fast tool
change without key.
Die cast aluminium gear housing
Metal gear housings ensure
optimum integral machine
strength and maximum heat
dissipation which aids motor
cooling and prolongs service life.
Metabo S-automatic torque
limiting clutch
Prevents sudden reverse kick
back if a disc or bit should
jam in the work piece - pro-
tecting machine and user.
Infinitely variable
speed control
For setting the
ideal speed without
problems.

| 95
DRILLS
Which drill for which application?
Pilot drilling of riveted joints, aluminium and BE 4006 96
thin sheet metal, pilot drilling of wood, 400 Watts
kitchen installation
Nail holes in strips
Wood – small diameter Light screwing applications BE 4010 96
Vehicle body manufacture 400 Watts
Steel and cast iron
Inox profiles, pipes and sheets
Wood – smaller diameter B 561 96
Vehicle body manufacture 560 Watts
Steel and cast iron
Sheet metal, switch cabinet manufacture
Wood – smaller diameter Light screwing applications BE 561 96
Vehicle body manufacture 560 Watts
Steel and cast iron
Sheet metal, switch cabinet manufacture
Drilling of stainless steel installations Screwing applications BE 622 S-R+L 97
(counter construction) Stirring of paint (painters) 620 Watts
Drilling with auger bits and forstner pattern bits Stirring of viscous fluids
Steel (mechanical engineering, Screwing applications BE 710 97
scaffolding manufacture, locks) Stirring of paint 710 Watts
Wood (carpenters, joiners, interior decorators)
Ceramic, tiles (building services, plumbers) Screwing applications BE 1020 97
Application with drill stand Stirring of paint 1.020 Watts
Service and assembly applications Application as driving unit
Steel – large diameter Stirring of paint BDE 1100 98
Wood – extremely large diameter Stirring of viscous fluids 1.100 Watts
Diamond Core drilling
Kitchen installation WBE 700 98
Mechanical engineering 705 Watts
Assembly work (furniture, locksmiths, fitters)
Stirring of viscous fluids: RWE 1100 99
Gypsum, filler compound, tile adhesive, joint filler, 1.100 Watts
mortar, ready-made plaster (painters, plasterers,
bricklayers)
Steel – large diameter Screws (long screws with large drilling B 32/3 100
Wood –large diameter diameter, e.g. frames and facade pegs) 1.800 Watts
Form work drill bit Stirring of viscous fluids
Drilling and hollow milling in steel substructures MAG 832 101
(mechanical engineering) 800 Watts
Drilling of steel carriers
Stationary drilling in wood, wood-like TB E 4512 102
materials, plastic and metal 700 Watts
TB E 5014
800 Watts
Drilling Inserting screws, stirring Type and output Page
NEW
NEW
NEW
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS

96 |
BE 4010
BE 4006 B 561 BE 561
Comparative
device characteristics
Torque 6 Nm 8 Nm
Drilling capacity in
- Steel 6 mm 10 mm
- Softwood 12 mm 20 mm
No load speed 0 - 4.000 /min 0 - 2.850 /min
Rated input power 400 W 400 W
Output power 220 W 220 W
Rated load speed 2.400 /min 1.800 /min
Collar diameter
Drilling spindle thread 1/2" - 20 UNF 1/2" - 20 UNF
Chuck capacity 1 - 10 mm 1 - 10 mm
Drilling spindle with hexagon
recess
1/4" (6,35 mm) 1/4" (6,35 mm)
Weight (without mains cable) 1,2 kg 1,2 kg
Standard equipment Quick-action
keyless chuck
Futuro Plus
Quick-action
keyless chuck
Futuro Plus
Type BE 4006 BE 4010
Order no. 6.00554 6.00555 
COMMON FEATURES

Compact, lightweight machine with special
cup housing design

Small, handy bench machine

Ergonomic housing design with large trigger button

User-friendly guidance of machine exhaust in all working
situations

Variospeed (V) electronics

Long-life motor

Clockwise and anticlockwise rotation

Quick-action keyless chuck Futuro Plus

Spindle with hexagon recess for screwdriver bits
400 Watt
Electronic
Drill
BE 4006
400 Watt
Electronic
Drill
BE 4010
DRILLS
Special advantages
Variospeed (V) electronics 
Thumbwheel for
preselection of speed

Clockwise and
anticlockwise rotation

Comparative
device characteristics
Torque 5 Nm 5 Nm
Drilling capacity in
- Steel 10 mm 10 mm
- Softwood 20 mm 20 mm
No load speed 2.800 /min 0 - 2.800 /min
Rated input power 560 W 560 W
Output power 320 W 320 W
Rated load speed 1.700 /min 1.700 /min
Collar diameter 43 mm 43 mm
Drilling spindle thread 1/2" - 20 UNF 1/2" - 20 UNF
Chuck capacity 1 - 10 mm 1 - 10 mm
Drilling spindle with hexagon
recess
1/4" (6,35 mm)
Weight (without mains cable) 1,7 kg 1,7 kg
Type B 561 BE 561
Order no. Machine with
– Quick-action keyless chuck Futuro Plus
– 6.01162.82
– Geared chuck and chuck key 6.01161 6.01162.00 
COMMON FEATURES

Small, handy bench machine

Sturdy double-shell housing

Ergonomic housing design with large trigger button

Long-life motor

Spindle with hexagon recess for screwdriver bits

Rubber-coated handle
560 Watt
Drill
B 561
560 Watt
Electronic
Drill
BE 561
NEWNEW

| 97
B E 622 S- R+L BE 1020BE 710
Comparative device characteristics
Torque 35 Nm
Drilling capacity in
- Steel 16 mm
- Softwood 40 mm
No load speed 0 - 550 /min
Rated input power 620 W
Output power 360 W
Rated load speed 330 /min
Collar diameter 43 mm
Drilling spindle thread 1/2" - 20 UNF
Chuck capacity 1,5 - 13 mm
Drilling spindle with hexagon
recess
1/4" (6,35 mm)
Weight (without mains cable) 2,1 kg
Standard equipment Geared chuck, chuck key,
long side handle
Type B E 622 S- R+L
Order no. 6.00626 
EQUIPMENT FEATURES

Die cast aluminium gear housing

Variospeed (V) electronics

Metabo S-automatic torque limiting clutch

Clockwise and anticlockwise rotation

Geared chuck

Spindle with hexagon recess for screwdriver bits

Suitable for drilling with drill bits with large diameter
(e.g. formwork drill bits) and for stirring thick
liquid-like materials

High torque

Long side handle for work with high torque

Auto-stop carbon brushes
620 Watt
Electronic Drill
B E 622 S- R+L
DRILLS
Type BE 710 BE 1020
Order no. Machine with
– Quick-action keyless chuck Futuro Plus 6.00830.91 –
– Geared chuck and chuck key 6.00830.00 6.00831.00 
COMMON FEATURES
710 Watt
Electronic
Two-Speed
Drill
BE 710
1020 Watt
Electronic
Two-Speed
Drill
BE 1020

Die cast aluminium gear housing

Optimal cooling by axial/radial fan

Ergonomic housing design with large trigger button

Thumbwheel for preselection of speed

Two-speed gear unit

Robust Metabo Marathon motor

Metabo S-automatic torque limiting clutch

Metabo winding protection grid

Clockwise and anticlockwise rotation

Spindle with hexagon recess for screwdriver bits

Auto-stop carbon brushes
Special advantages
Variospeed (V) electronics 
Vario Tacho Constamatic
(VTC) full-wave electronics

High torque 
Overload protection 
No-volt release switch 
Brush wear indicator 
Comparative
device characteristics
Torque 16 Nm/6 Nm 28 Nm/10 Nm
Drilling capacity in
- Steel 13 mm/8 mm 16 mm/8 mm
- Softwood 40 mm/25 mm 40 mm/25 mm
No load speed 0 - 1.000 /
0 - 3.000 /min
0 - 900 /
0 - 2.600 /min
Rated input power 710 W 1.020 W
Output power 420 W 620 W
Rated load speed 560/1.700 /min 900/2.600 /min
Collar diameter 43 mm 43 mm
Drilling spindle thread 1/2" - 20 UNF 1/2" - 20 UNF
Chuck capacity 1,5 - 13 mm 1,5 - 13 mm
Drilling spindle with hexagon
recess
1/4"
(6,35 mm)
1/4"
(6,35 mm)
Weight (without mains cable) 2,2 kg 2,3 kg
Standard equipment Side handle Long side
handle
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS

98 |
BDE 1100 WBE 700
Comparative
device characteristics
Torque 55 Nm/22 Nm
Drilling capacity in
- Steel 16 mm/10 mm
- Softwood 40 mm/25 mm
No load speed 0 - 640 / 0 - 1.200 /min
Rated input power 1.100 W
Output power 620 W
Rated load speed 430/800 /min
Collar diameter 43 mm
Drilling spindle thread 5/8" - 16 UN
Chuck capacity 3 - 16 mm
Weight (without mains cable) 3,8 kg
Standard equipment Geared chuck, chuck key,
long side handle,
drilling depth guide
Type BDE 1100
Order no. 6.00806 
EQUIPMENT FEATURES

Die cast aluminium gear housing

Variospeed (V) electronics

Two-speed gear unit

Metabo S-automatic torque limiting clutch

Clockwise and anticlockwise rotation

Geared chuck

Suitable for drilling with drill bits with large diameter
(e.g. formwork drill bits) and for stirring thick
liquid-like materials

High torque

Comfortable operation and safety through auxiliary handle

Auto-stop carbon brushes
1100 Watt
Electronic
Two-Speed Drill
BDE 1100
DRILLS
Comparative
device characteristics
Torque 8 Nm
Drilling capacity in
- Steel 10 mm
- Softwood 25 mm
No load speed 850 - 2.050 /min
Rated input power 705 W
Output power 430 W
Rated load speed 1.500 /min
Drilling spindle thread 1/2" - 20 UNF
Chuck capacity 1 - 10 mm
Weight (without mains cable) 1,8 kg
Standard equipment Geared chuck, chuck key,
side handle
Type WBE 700
Order no. 6.00512
EQUIPMENT FEATURES

Die cast aluminium gear housing

Vario Constamatic (VC) full-wave electronics

Thumbwheel for preselection of speed

Geared chuck

Especially suitable for working in places difficult to reach

Auto-stop carbon brushes
705 Watt
Electronic
Angle Drill
WBE 700

| 99
RWE 1100
Comparative
device characteristics
Torque 45 Nm
Maximum stirring basket diameter 160 mm
No load speed 0 - 700 /min
Rated input power 1.100 W
Output power 660 W
Rated load speed 480 /min
Collar diameter 43 mm
Bit retainer M 14 female thread
Weight (without mains cable) 3,4 kg
Standard equipment Side handle, without adapter
Type RWE 1100
Order no. 6.01111 
EQUIPMENT FEATURES

Ideal stirring and mixing device for tough permanent use
for plastering, painting and brickwork

Suitable for stirring thick liquid-like materials

Die cast aluminium gear housing

Comfortable operation and safety through auxiliary handle

Variospeed (V) electronics

Soft start

Quick change adapter (accessory)
1100 Watt
Electronic
Stirrer
RWE 1100
STIRRERS
ACCESSORIES FOR THE STIRRERS
Agitator paddles with M14 MThr
Diameter
mm
Length
mm
Maximum
material
quantity kg
Maximum
speed
/min
Order
no.
Type RS 2, mixing effect from top to bottom
Paint, Varnish, Cement slurry/finished mortar
110 600 15 - 40 500 - 700 6.31950
140 600 30 - 60 500 - 700 6.31951
Type RS 3, mixing effect from top to bottom
Plaster, Mortar, Filler compound,
Thermal insulation materials
100 600 10 - 25 500 - 700 6.31952
130 600 20 - 50 500 - 700 6.31953
160 600 30 - 150 500 - 700 6.31954
Type RS 3, mixing effect from bottom to top
Plaster, Mortar, Filler compound,
Thermal insulation materials
100 600 10 - 25 500 - 700 6.31963
130 600 20 - 50 500 - 700 6.31964
160 600 30 - 150 500 - 700 6.31965
Type RS 4, mixing effect from bottom to top
2-component materials
100 600 10 - 20 500 - 700 6.31955
130 600 20 - 30 500 - 700 6.31956
160 600 30 - 150 500 - 700 6.31957
Type RS 8
Liquids, Granules, Float finish
120 600 35 - 70 500 - 700 6.31958
Connectors with M14 FThr
For machines with other spindle holders
Order
no.
Holder: 1/2" -20 UNF,
M 14 female thread
6.31959
Holder: 5/8"- 16 UN,
M 14 female thread
6.31960
Holder: M 14 male thread,
M 14 female thread
6.31961
Holder: M 18
male thread,
M 14 female thread
6.31962
Holder: B 16
male thread,
M 14 female thread
6.31969
Quick change adapter
Order
no.
for easily removing or fitting the
agitator paddle for cleaning or
replacement purposes
6.31966
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS

100 |
B 32/3
Comparative device characteristics
Torque 190 Nm/120 Nm/90 Nm
Drilling capacity in
- Steel 32 mm
- Softwood 70 mm
No load speed 170/320/470 /min
Rated input power 1.800 W
Output power 1.200 W
Rated load speed 110/190/280 /min
Collar diameter 65 mm
Drilling spindle with taper socket MK 3
Weight (without mains cable) 7,5 kg
Standard equipment Chuck key, long side handle
Type B 32/3
Order no. 6.00323
EQUIPMENT FEATURES

Powerful three-speed drill with extra high torque
for difficult drilling work, including into steel

Robust mechanical gearbox with oil bath lubrication

Die cast aluminium gear housing

Torque limiting clutch

Suitable for drilling with drill bits with large diameter
(e.g. formwork drill bits), for stirring thick liquid-like
materials and for screwing in long screws with large
diameter (e.g. in frame and facade pegs)

High torque

Long side handle for work with high torque
1800 Watt
Three-Speed
Drill
B 32/3
DRILLS
ACCESSORIES FOR THE B 32/3 DRILL
Taper arbors for chucks
Hardened and ground
For chuck with taper socket
According to DIN 238
Outer
morse
taper Ø
Chuck taper Overall taper
arbor length
mm
Weight
kg
Order
no.
MK 3 B 16 134 0,31 6.35125
MK 3 B 18 141 0,32 6.35126
MK 3 B 22 147 0,39 6.35128
MK 3 J 3 135 0,31 6.35129
MK 3 J 33 129 0,31 6.35130
MK 3 J 6 129 0,31 6.35131
Reducing sleeves for tools with morse taper
Standard type
Similar to DIN 2185
Ground external taper
Outer
morse
taper Ø
Inner morse
taper Ø
Overall length
mm
Weight
kg
Order
no.
MK 3 MK 1 99 0,25 6.35140
MK 3 MK 2 112 0,19 6.35143
Drift key
Suitable for
machine with
morse taper
Overall length
mm
Weight
kg
Order
no.
MK 3 190 0,15 6.42396
NEW

| 101
MAG 832
Comparative device characteristics
Torque 50 Nm/19 Nm
Maximum cutting edge
tool diameter
32 mm
Magnet stand:
- Max. stroke 130 mm
- Power consumption 50 W
- Max. adhesive power 8.000 N
- Dimensions of the magnet base 90 x 170 mm
Motor:
Rated input power 800 W
Output power 450 W
No-load speeds 530/1.400 /min
Rated load speeds 320/850 /min
Collar diameter 43 mm
Spindle thread 5/8" - 16 UNF
Hole cutting and drilling unit:
Height (including motor) at
- Bottommost carriage position 405 mm
- Topmost carriage position 525 mm
Weight 14 kg
Standard equipment Tool holder (internal diameter
19 mm), 2 hexagon spanners,
safety belt
Type MAG 832
Order no. 6.00832 
EQUIPMENT FEATURES

Magnet base with high holding power for safe operation

Also suitable for working overhead on vertical and inclined
surfaces using the safety belt provided

Enables precise and clean drilling. Motor and carriage
form a unit

Height adjustment of carraige with pinion and toothed rack

The motor can only be turned on after turning on
the magnet base

Fatigue-free work by hollow milling

Two speeds

Holder bit for chuck (accessory) for working with
spiral drill bits
Electromagnetic
Hole Cutting and
Drilling Unit
MAG 832
MAGNETIC DRILLING UNITS
ACCESSORIES FOR THE ELECTROMAGNETIC HOLE
CUTTING AND DRILLING UNIT MAG 832
Cutters
HPHSS
Weldon shank 19 mm
A centring pin is required for working
with the cutters.
Diameter
mm
Cutting depth
mm
Order
no.
14 25 6.30025
15 25 6.30026
16 25 6.30027
17 25 6.30028
18 25 6.30029
19 25 6.30030
20 25 6.30031
21 25 6.30032
22 25 6.30033
23 25 6.30034
24 25 6.30035
25 25 6.30036
26 25 6.30037
27 25 6.30038
28 25 6.30039
29 25 6.30040
30 25 6.30041
31 25 6.30042
32 25 6.30043
14 50 6.30075
15 50 6.30076
16 50 6.30077
17 50 6.30078
18 50 6.30079
19 50 6.30080
20 50 6.30081
21 50 6.30082
22 50 6.30083
23 50 6.30084
24 50 6.30085
25 50 6.30086
26 50 6.30087
27 50 6.30088
28 50 6.30089
29 50 6.30090
30 50 6.30091
31 50 6.30092
32 50 6.30093
Centring pins
For working with the cutters
Suitable for cutting depth up to
mm
Order
no.
25 6.30054
50 6.30055
Chuck holder
Order
no.
For chuck with female
thread 1/2"-20 UNF
6.30051
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS