Meubilair 102077-05 User manual

1 / 10
REQUIRED ASSEMBLY TOOLS
FLOOR AREA
2M x 2M
REQUIRED ASSEMBLY SPACEAPPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY
1.0hr
PHILLIPS SCREWDRIVER
Kitchen 2 Door Island Solid Wood Counter Top-White
Flat Head screwdriver

2 / 10
Kitchen 2 Door Island Solid Wood Counter Top-White
Tips before you start:
1. Please check that all parts are present before you start the assembly of your furniture.
2. For ease and speed of assembly, we recommend that before you commence each
step of the assembly, that you idenfy all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
5. For the protecon of your furniture, we recommend that the product is placed on a
protected surface during assembly to prevent any damage.
6. During assembly please take care not to over-ghten any fings, as this may damage
the product.
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. This product is intended for indoor, household use only as it is non industrial product.
10. Due to the painted finish of this product, when first opening the carton and
assembling, the smell of paint may be noceable. If there is any smell of paint it will
dissipate over a short period of me. The paint is non-toxic and contains no lead.
Please contact your nearest The Warehouse store if you have any concerns.
Care and Maintenance of your Furniture
 Please periodically check all fings and re-ghten as necessary.
 To clean your item, please use a damp cloth and wipe clean.
 Never allow any kind of liquid to remain on your furniture. Absorpon can cause wood
to warp or finishes to de-laminate.
 Please do not place hot items (eg. Hot drinks) directly on to the surface.

3 / 10
Tips before you start:
QUICKFIT
CAM LOCK
When fing cam lock, ensure starng posion is correct before you insert connecng quickfit.
Quickfit head should be in
the centre of the cam lock
when the two panels are joined.
Cam lock should be inserted
before quickfit.
Turn cam lock clockwise to ghten.
Tighten quickfit unl shoulder is flush with panel. Do not overghten or underghten.
Kitchen 2 Door Island Solid Wood Counter Top-White

4 / 10
Kitchen 2 Door Island Solid Wood Counter Top-White
HARDWARE LIST
PARTS LIST
A x 6 B x 1 C x 16 D x 16 E x 30 F x 9 G x 2 H x 4
I x 8 J x 8 K x 2 L x 2 M x 1 N x 2 O x 2 P x 4
Q x 18 R x 2 S x 4 T x 8 U x 4 V x 4
11PC 22PCS
3
2PCS 41PC
51PC 6 1PC 71PC 8 1PC
9
1PC 10 1PC 11 12 2PCS
1PC
Screw Allen key Cam bolt Cam lock Wood Dowel Bolt Magnet Screw
Nut Bolt Caster with brake Caster Wrench Screw Metal plate Hinge
Screw Handl e Handle screw Pin Fasterner Screw

5 / 10
STEP 1
Kitchen 2 Door Island Solid Wood Counter Top-White
A x 4
B x 1
13 2PCS 14 1PC
15
1PC 16 1PC
17 2PCS 18 1PC
A
B
A
AA
Insert the towel rail (3) and assemble the hanger rail (2 ) to the le side panel (1) with the longest screws(A).

6 / 10
STEP 2
STEP 2STEP 3
Basic Kitchen Cart
A x 2
C x 2
C x 2
D x 2
E x 10
F x 9
A
B
C
D
E
E
I
J
D x 2
E x 6
J x 2
A
J
D
B
C
D
E
E
I
J
18
F
E
J x 2
I x 2
F
F
F
FF
F
F
F
E
E
E
E
E
C
ED
E
J
I
I x 2
I
E
E
E
C
Kitchen 2 Door Island Solid Wood Counter Top-White
1.Insert the towel rail (3) and assemble the le storage side panel (6), the right
storage side panel (5) with storage shelf panel (4) with cam bolt (C) and
cam lock (D) and wood dowel (E).
2.Assemble the storage to the right side panel (7) with wood dowel(E), bolt (J), nut (I)
and longest wood screws (A).
1.Assemble the paron panel (8) to the shelf panel (9)
with bolt (J), nut (I)and wood dowel (E).
2.Assemble the boom stretcher (12&18) to the boom
shelf (11) with shortest bolts (F) and wood dowel
(E).
E

7 / 10
STEP 5
STEP 4
C x 4
C x 2
D x 2
D x 4
B
I
J
C
D
E
E
J
E x 4
I x 2
J x 2
C
E
I
E
I
J
C
C
D
D
E
E
E x 4
G x 2
H x 4
I x 2
JCE
I
D
E
D
C
J x 2
Kitchen 2 Door Island Solid Wood Counter Top-White
1.Assemble the middle shelf (9) and boom shelf (11) to right side panel (7) with
cam bolt (C), cam lock (D), bolt (J), nut (I) and wood dowel ( E).
1.Assemble the magnet (G) on the front stretcher (10) with wood screws (H).
2.Assemble front stretches(10) to right side panel (7).
3.Assemble the le side panel (1) to middle shelf, boom shelf and front
stretches(10) with wood dowel(E), cam bolt (C), cam lock (D), bolt (J), and nut (I).
G
H
G
H

8 / 10
STEP 7
STEP 6
Kitchen 2 Door Island Solid Wood Counter Top-White
C x 6
L x 2
M x 1
K x 2
D x 6
E x 6
M
KL
L
K
C
14
14
D
E
C
C
C
C
C
E
EE
EE
D
D
DD
D
Assemble the caster with lock (K) and caster (L) to the le side frame (1) & right side frame (7)
1.Stand unit upright. Insert the back panel (13) .
2.Assemble the top panel (14) with wood dowel (E), cam bolt (C) and cam lock (D), please pay
aenon to assemble the cam lock on both side panels firstly.
D
with wrench (M).

9 / 10
STEP 9
STEP 8
Basic Kitchen Cart
N x 2
P x 4
Q x 18
R x 2
Kitchen 2 Door Island Solid Wood Counter Top-White
O
PQ
Q
Q
R
S
T
15 & 16
15
17
17
16
S
P
Q
QQ
Q
T
S x 4
T x 8
O x 2
1.Insert the screw (N) to fix the slat and top panel .
14
N
N
1Aached (O) on upper corner of the inside door ghten with screw (Q).
2.Aached handle (R) on the door ghten with screw (S).
3.Aached hinge (P) on the door ghten with screw (Q).
N
N
4.Insert metal support (T) to panel (1) (7)&(8),then put the panel (17) on it.

10 / 10
STEP 10
Kitchen 2 Door Island Solid Wood Counter Top-White
13
13
1.Insert the plasc fastener (U) to the back panel
as shown posion with screw (V)
2.to make sure the whole product is stable.
U x 4
V x 4
U
U
U
U
V
V
V
V
STEP 11

Warranty Cerficate
Congratulaons! You have made an excellent choice of this quality product. Our commitment to quality also includes our service.
Should you, contrary to expecta ns, experience defects due to manufacturing faults, Meubilai r Direct Imports will provide you with a
warranty against defects as follows:
Warranty
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discre n. The
benefits conferred
by this warranty are in addi n to all rights and remedies in respect of the product that the consumer has under the Compe n and
Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are en tled to a replacement or
refund for a major failure and for compensa n for any other reasonably foreseeable loss or damage. You are also en tled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
esahcruP fo foorP
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket, tax invoice or receipt as the
best proof of purchase, and as proof of date on which the purchase was made.
Normal Wear and raeT
This warranty does not cover normal wear and tear to the products or parts.
Exclusions
This warranty does not cover:
Any defects caused by an accident, misuse, abuse, improper installa n or opera n, lack of reasonable care, unauthorized
modifica n, loss of parts, tampering or a empted repair by a person not authorized by the distributor.
Any product that has not been installed, operated or maintained in accordance with the manufacturers’ opera ng instruc ns
provided with the product.
Any product that has been used for purposes other than domes c use.
Any damage caused by improper power input or improper cable connec on.
STROPMI TCERID RIALIBUEM PTY LTD
Customer Service
Email: [e-mail]
Address: Unit 4, 4-5 Lambridge Place, Penrith, NSW, 2750
Opening Hou rs 9:00 am – 4:30pm (Mon -Fri)
When making a return, please ensure the product is properly packaged, so as to ensure that no damage occurs to the
product during transit.
Please provide the original or a copy of the proof of purchase. Also please make sure you have included an explana on of
the problem.
Please note that the costs of making a warranty claim, including any return postage, will be covered by the supplier
iden ed above.
Please note upon receiving your warranty claim, the supplier will send, via the post or email, a repair and refurbished
goods or parts no ce. Please provide your email address and advise the supplier, if you wish to obtain a repair and
refurbished goods or parts no ce via email.
AFTER SALES SUPPORT
EMAIL : [e-mail] Product code:
102077-05

etacifitreC ytnarraW
AFTER SALES SUPPORT
EMAIL : [e-mail] Product code: 102077-05
PRODUCT NAME: Kitchen 2 Door Island Solid Wood Counter Top
BRAND NAME:
PRODUCT CODE: 102077-05
NAME
ADDRESS
EMAIL DAYTIME TEL NO
DATE OF PURCHASE
SERIAL NUMBER
We recommend that you a ach a photocopy of your receipt, showing the date of purchase, to this Warranty
cer cate and kee .ecnerefer ruoy rof p
In the event of a product fault, please email the Customer Service team. Please ensure that you include the
product details (as shown on the card) at hand so that we are able to respond as quickly and efficiently as
possible.
Customer Service
Email: [e-mail]
Address: Unit 4, 4-5 Lambridge Place, Penrith, NSW, 2750
Opening Hours 9:00 am – 4:30pm (Mon -Fri)
Meubilair Direct Imports PTY LTD