modway EEI-2461 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 2
EEI–2461 BENCH
Hardware:
Component:
A Bolt M6x40mm x 8
B
1
Bench Body x1 2 Bench Side x2
Thank you for purchasing the MODWAY BENCH!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bench, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
1
E
2
Spring Washer M6 x 8
Allen Wrench x 1
C Flat Washer M6 x 8
2
D Plastic Washer x 8

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 2
EEI–2461 BENCH
STEP 1:
STEP 2:
Hardware & Tool required
Please find the hardware package in the carton.
Put 1 piece of Bench Side (2) on a carpeted or padded area.
Attach Bench Body (1) to the Bench Side (2) by using 4 pieces of Bolt (A), 4 pieces of Spring Washer (B), 4 pieces of Flat
Washer (C) and 4 pieces of Plastic Washer (D) as shown.
Repeat the same steps for the remaining Bench Side (2).
Use Allen Wrench (E) to tighten all the Bolts (A) clockwise until secure.
Ax8 Bx8 Cx8 Dx8 Ex1
Assembly is completed. Your bench is ready to be enjoyed now!
Carefully move the assembled bench to the position your desired.
C
E
A
B
C
B
A D
D
A B
C
D
A B C
D
A B
C D
A
B
C
D
A
B
C
D D
C
A
B
1
2
2