Ballard Designs Ashford MT348 User manual

REQUIRED TOOLS:
Phillips Screwdriver, Allen Key (included)
-Two person assembly suggested.
Ltr. Qty. Hardware/Components Included
Wall Anchoring
(Anti-tip) Kit
See page 2
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
ANCHORING HARDWARE INCLUDED
*Allen Key
*Glass Top
(Ships installed)
Table
B 1
D 1
A 1
C 1
*REMOVING GLASS for CLEANING (optional)
Invert Table onto a level, padded surface. Use Allen
Key (A) to remove 10 screws along frame edge as
illustrated. Carefully separate Table, Glass and Frame.
Reverse process to reinstall.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 11-29-2022 Page 1 of 2
PRODUCT NAME: Ashford Side Table
ITEM NUMBER: MT348
ASSEMBLED DIMENSIONS : 23”H x 26”W x 18”D
MADE IN INDIA
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.

WALL ANCHORING HARDWARE (ANTI-TIP)
1. Align D-Ring(s) on back of console with a WALL STUD.
2. Attach Bracket (B) directly into WALL STUD using Screws (A)
3. Move Table into place, align Brackets then connect both using Retention Belt (C).
5. Confirm Belt is securely laced and locked.
Anti-Tip Hardware Installation
Retention Belt
Hardware Included
B2
C2
A4
Ltr. Qty.
Screws
Bracket
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Page 2 of 2
Customer Service: 800-367-2810
Online: www.ballarddesigns.com