Mi 2 Basic User manual

Mi True Wireless Earbuds Basic 2
User Manual

Product Overview
Charging Case
Micro USB
Charging Port
Charging Indicator
Charging
Pins
Read thismanual carefully before use, and retain
it for future reference.

Microphone
Indicator
M
Charging Contact Points
L S
Earbuds
The earbuds come with the size M of ear tips
inalled, you can switch to size S or Lif the
inalled size does not suit your ear.

Wearing
Gently insert the earbud into the ear canal,make
sure it is noteasy to swaywhen shaking your head.
expose the microphone during calls.

Charging
Before using the device, please tear o the
protective film from the earbuds'contact points
to fully charge them and their charging case.
Connect the charging cable to charge the earbuds
and the charging case simultaneously.
The indicator is red while charging, and changes
1 minute.
Protective Film

Press and hold
for 1 second
Indicator is white
for 1 second
Press and hold
for 5 seconds
Indicator is red for
about 2 seconds
Turning On
Once you remove the earbud from the charging
case, it automatically turns on.
In case the earbuds arenotin the charging case
and turned o, press and hold the multi-function
Turning O
Once you place the earbud into the charging
case, it automatically turns o.
When the earbud is turned on, press and hold
indicator turns red.

Switch between single and dual earbud:
When both earbuds areconnected successfully,
they are in dual-earbud mode. Place one of the
earbuds back into the charging case and close
its lid, the other earbud will automatically enter
the single-earbud mode. Remove the earbud
from the charging case, the dual-earbud mode
will automatically be reored again.
Connection
Automatic Connection:
1.
2. Once your device and earbuds are successfully
connected, yourearbuds will automatically
connect to the previously paired device (the
Bluetooth is enabled) when they are turnedon.
Note: If you cannot pair the earbuds, place them
back in the case and repeat the previous eps.
Remove both earbuds from the charging case
simultaneously, and wait for the earbuds to
automatically turn on. The indicator turns
white and then changes into quickly blinking
white and red alternately, which means the
earbuds are connecting with each other. When
white, please enable the Bluetooth function on
your device and search for "Mi True Wireless
EBs Basic 2" to connect.

Reset Earbuds
If the earbuds cannotconnect properly, please
carry out the following eps to reset: Remove
the earbuds from the charging case, and make
sure they are turnedo. Press and hold the multi-
seconds until the indicator alternately blinks red
and place the earbuds back in the charging case.
Once the earbuds are resetsuccessfully, the
connection between your device and the earbuds
are cleared, you should pair them with your
device again.

Function Overview
Answer/End calls
end calls.
Reject a call
a call.
Press
Press and hold
for 1 second
The following functions can be used on
both earbuds:

the music while using the earbuds.
Turn On Voice Assiant
the voice assiant while using the earbuds.
Note: The function of voice assiant and quick
wake-up mu be supported and enabled on
your device.
Press
Play/Pause Music
Double press

Answer a SecondCall/Switch between Calls
second incomingcallduring an ongoing call.
between the two calls.
Switch between Earbuds and Device
Duringa call, press and hold the multi-function
earbuds and your phone.
Mute/Unmute
unmute the earbuds during an ongoing call.

Precautions
Warning
1.Do not disassemble, repair or modify the product
forany reason, as thismay cause fire or even
completely deroy the product.
2. Do notexpose the productto environments
where the temperature is too low or too high
(below 0°C or above 45°C).
3. Keepthe indicators awayfrom the eyes of
children and animals while usingthe earbuds.
4. Do notuse this product during thunderorms.
Thunderorms may cause the product to
malfunction and increase the risk of electric
shocks.
5. Do not wipe and clean the earbuds or their
case with alcohol or other volatile liquids.
6. Avoid any contact with liquids.
7.Excessive sound pressure from the earbuds
can cause hearing loss.
Illurationsofproduct, accessories, and user
interface in the user manual are forreference
purposes only. The actual product and functions
may vary due to product enhancements.

1.If the product has not been used for more
than 2 weeks, it is recommended to charge
the product before use.
2. Onlyuse certified chargers supplied by qualified
manufacturers.
3. Continuoususeof the earbudsfora longtime
is detrimental to one's hearing. Do not use
the earbuds at a high volume forany extended
period.
4. Using earbuds can reduce the perception of
external sounds. Do not use earbuds in
environments that may threaten safety. It is
recommended to only use a single earbud
when outdoors.
Due to the connection characteriics of the
Bluetooth signal, in dense environments with
2.4 GHz electromagneticsignal interferences,
there may be occasional disconnects or no
sound.
Note

Name: Mi True Wireless Earbuds Basic 2
Model: TWSEJ061LS
Bluetooth Operating Frequency:
2402-2480 MHz (For EU)
Max RF Output Power: < 20 mW
Earbuds
Dimensions: 26.65 × 16.4 × 21.6 mm
Net Weight: Approx. 4.1 g (per earbud)
Wireless Range:
10 m (in an obacle-free environment)
Charging Time: Approx. 1.5 h
MusicPlayback Time: Approx. 4 h (earbudsonly);
approx. 12 h (charging case)
Standby Time: Approx. 150 h
Input: 5 V 100 mA
Wireless Connectivity: Bluetooth 5.0
Bluetooth Profiles: HFP/A2DP/HSP/AVRCP
Specifications
Charging Case
Dimensions: 62 × 40 × 27.2 mm
Input: 5 V 500 mA Output: 5 V 150 mA
Charging Time: Approx. 2 h
Storage Temperature: 0 °C to 45 °C
Operating Temperature: 0 °C to 45 °C
Service Life: 1 year

EU DECLARATION OF CONFORMITY
Hereby, Qianxing Inc., declares that the radio
equipment type TWSEJ061LS isin compliance
with Directive 2014/53/EU. The full text of the
EU declaration of conformity isavailableat
the following internet address:
declaration.html
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Direct current
To indicateon the rating plate that the equipment
is suitable for direct current only; to identify
relevant terminals.
To prevent possible hearing damage，
do not lien at high volume levels
for long periods.

To avoid the potential eects on the environment
and human health as aresult of the presence of
hazardoussubances in electrical and electronic
equipment, end users of electrical andelectronic
equipment should underand the meaningof
the crossed out wheeled bin symbol. Do not
dispose of WEEE as unsorted municipal wae
and have to collect such WEEE separately.
WEEE Information
All products bearing this symbol are wae
electricaland electronic equipment (WEEE
as in directive 2012/19/EU) whichshould
not bemixed withunsorted household
wae. Inead, you shouldprotect humanhealth
and the environment by handing over your wae
equipmenttoa designated collectionpointfor
the recycling of wae electrical and electronic
equipment,appointed by the government or local
authorities. Correct disposal and recycling will
help preventpotential negative consequences
to the environment and human health. Please
contact the inaller or local authorities for more
informationabout the location as well as terms
and conditions of such collection points.

For furtherinformation, please gotowww.mi.com
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Chongqing Qianxing
Technology Co., Ltd.
(a Mi Ecosyem company)
that can defeat a safeguard (such ascatching fire,
explosion, leakage of corrosive electrolyte etc);
in an extremely high temperature surrounding
environment that can result in an explosion or
the leakage of flammable liquid or gas; and a
that mayresult in an explosion or the leakage of
flammable liquid or gas.
Address: No. 60 Indurial Main Avenue, Pulv
Sub-dirict, Tongliang Dirict, Chongqing
Municipality, China.
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz