Micro STARTC2003-TW User manual

startc2003-tw_op.indd
#STARTC2003-TW TWO-WAY FM/FM
REMOTE CONTROL VEHICLE STARTER & ALARM SYSTEM
OPERATION MANUAL
FOR AUTOMATIC TRANSMISSION AND DEISEL ENGINE VEHICLES
®
FEATURES:
* 1 2-WAY FM/FM LCD REMOTE & 1 4-BUTTON FM/FM REMOTE
* NEW CODE LEARNING FM/FM FREQ. OPERATION
* KEYLESS-ENTRY DOOR LOCK/UNLOCK OUTPUTS (-)
* DOUBLE PULSE LOCK/UNLOCK OUTPUTS
* 6 RELAY PACK FOR INSTALLATION EASE
(Starter, Ignition, 2nd Ignition and Accessory)
* TWO METHODS OF DETECTING ENGINE OPERATION:
(Tachometer Learning & Smart Sense)
* ADDITIONAL OUTPUT FOR 2ND ACCESSORY (-)
* PARKING LIGHT OUTPUT, (+) POS & (-) NEG
* SIREN AND HORN OUTPUTS
* HOOD PIN SWITCH DISABLE INPUT (-)
* BRAKE PEDAL DISABLE/RESET INPUT (+)
* AUXILIARY OUTPUT FOR REMOTE HATCH/TRUNK
RELEASE (-)
* INPUT FOR ACTIVATION THROUGH ALARM’S
AUXILIARY OUTPUT
* 3 REMOTE START ATTEMPTS
* SELECTABLE 12, 24, 36, 48 MINUTE RUN TIME
* GLOW PLUG INPUT (FOR DEISEL ENGINES) (+)
* OEM ARM/DISARM OUTPUTS (-)
* OVERRIDE SWITCH
* LED STATUS INDICATOR

Doc#: startc2003op.9/26/02.qx
REMOTE CONTROL OpERATION:
1. Unlock / Disarm Button
2. Lock / Arm / Panic Button
3. Time Display
4. Ignition Switch Input Indicator
5. Mode Button
6. Lock / Unlock Status Indicator
7. Stage 2 Instant Shock Trigger
8. Door / Shock Sensor Response
LCD TRANSMITTER FUNCTION SET UP:
* Selecting Vehicle 1 or Vehicle 2 Control:
Press & hold the “MODE” button for two seconds to prompt the “1” icon.
Press & hold the “MODE” button again to prompt the “2” icon.
The icon shown either “1” or “2” - lets the user know which vehicle they are set to control.
* Set Time and Beep:
Press & release the “MODE” button five times
The “AM” or “PM” icon will start to flash. You are now in set-up mode.
When in set-up mode, refer to the Quick Reference Guide for remote button layout.
STARTC2003-TW
FM/FM 2-WAY REMOTE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Button Description
LOCK To choose either “AM” or “PM” or increase (+) time numeral
UNLOCK To choose either “AM” or “PM” or decrease (-) time numeral
START Cycles through the positions to adjust: “AM/PM” - “Hour” - “Minute”
SILENT To choose either “BEEP” On/Off, or “Silent/Vibrate” On/Off
MODE Press once to exit set-up mode or wait seven seconds for automatic exit
9. Transmit / Receiver Indicator
10. Valet Mode Status Indicator
11. Low Battery Indicator
12. Siren Status Indicator
13. Stage 1 Prewarn Shock Trigger
14. Trunk / Hood Indicator
15. AUX Button
16. Engine Start Button