Microdia miniSD User manual

miniSD
TM
& miniSDHC
TM
MEMORY CARDS
OPERATING MANUAL
SPECIFICATIONS
Dimension: 20.0 (W) x 21.5 (L) x 1.4 (T) mm Durability: 10,000 mating cycles
Weig t: Approx. 1g Bending: 10N
Voltage Performance: 2.7 to 3.6 V Torque: 0.10Nm
Temperature Performance:: -40°C to +85°C Drop Test: 1.5m free fall
Clock Frequency: Up to 25MB/sec
Humidity Performance: 5% to 95% RH
NOTE: Specifications are subject to c ange wit out notice.
CONFIRMATION OF PARTS LIST
miniSD
TM
or miniSDHC
TM
Memory Card
miniSD
TM
Adapter or
miniSDHC
TM
Adapter Plastic Case Manual
REMOVAL AND STOREAGE OF miniSD
TM
/ miniSDHC
TM
MEMORY CARD
1. Hold tig t of t e blister.
2. Turn t e blister upside down wit about an inc of distance between t e blister and t e table.
3. Use your fingers to pus t e edges of t e plastic case.
4. T en plastic case wit miniSD
TM
/ miniSDHC
TM
card and miniSD
TM
/ miniSDHC
TM
adapter will drop on t e table
5. Unlock and open t e lid of t e plastic case.
6. Store or remove t e miniSD
TM
/ miniSDHC
TM
card and miniSD
TM
/ miniSDHC
TM
adapter in t e tray. Ensure t e
miniSD
TM
/ miniSDHC
TM
card and miniSD
TM
/ miniSDHC
TM
adapter are placed properly on t e tray before closing t e
case.
Step 1
(miniSD
TM
Memory Card)
Step 1
(miniSDHC
TM
Memory Card) Step 2 & Step 3 Step 4 & 5 (miniSD
TM
Memory Card)
Step 4 & 5 (miniSDHC
TM
Memory Card)
Step 6
(miniSD
TM
Memory Card)
Step 6
(miniSDHC
TM
Memory Card)
All manuals and user guides at all-guides.com
all-guides.com

MICRODIA (USA)
Camden Ave., San Jose, CA 95120, USA
MICRODIA (UK)
Brick ill Drive, Manton Heig t, Bedford,
MK41 7QH, England
MICRODIA (HONG KONG)
International Sales Office
1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website: ttp://www.microdia.com
Email: [e-mail]
PRECAUTIONS FOR HANDLING AND STORAGE
• Keep out of t e reac of c ildren. Get medical advice immediately if swallowed.
• Do not touc t e interface pin directly by ands, metal or ard objects.
• Do not modify or disassemble t e miniSD
TM
/ miniSDHC
TM
card.
• Do not wet, eat/fire, impact, drop or bend t e miniSD
TM
/ miniSDHC
TM
.
• Do not use or store in a umid and dusty place; in ot place suc as inside a ot car, under
a blazing sun, near fire, a stove, an air-conditioner outlet, etc.
• Do not expose to strong magnet fields, electrical noise and put near corrosive c emicals/gas.
T is may cause damage t roug melting or t e emission of eat/smoke or cause product
failure.
• Do not place in cooking appliances suc as microwave ovens or ig -pressure containers.
• Do not detac t e label on t e miniSD
TM
/ miniSDHC
TM
cards and adapter. Do not attac
ot er stickers/labels on t e miniSD
TM
/ miniSDHC
TM
card and adapter.
DATA PROTECTION
• MICRODIA miniSD
TM
/ miniSDHC
TM
Memory Card comes pre-formatted. Make sure to
back up all t e data on your miniSD
TM
/ miniSDHC
TM
card before formatting.
• Slide down Write-Protect Switc to “LOCK” for preventing record/edit t e card. Unlock
t e card before reading/writing data.
Unlock Lock
• Do not remove miniSD
TM
/ miniSDHC
TM
card and switc off any equipment using t e card
w en data is being read, written and transferred. It can cause data to be destroyed.
• Insert t e miniSD
TM
/ miniSDHC
TM
card firmly in t e correct orientation. T e product will
not operate correctly if it is inserted in an incorrect orientation or not inserted all t e
way.
• Parental Guidance is needed w en a c ild uses t e miniSD
TM
/ miniSDHC
TM
cards. Teac
t e c ild ow to use and protect t e product and insure t at t e c ild follows your
instructions.
All manuals and user guides at all-guides.com