Microdia CF User manual

MICRODIA Ltd
Email: [e-mail]
Website: http:// .microdia.com
CF
TM
MEMEORY CARD
OPERATING MANUAL
SPECIFICATIONS
CONFIRMATION OF PARTS LIST
Dimension: 36.4 (L) x 41.8 (W) x 3.3 (T) mm
Weight: Approx. 11g
Voltage Performance: 3.3V ± 5% or 5V ± 10%
Temperature Performance: -25°C to +85°C
Humidity Performance: 5% to 95% RH
CF
TM
memory card Plastic Case Manual
NOTE: Specifications are subject to change ithout notice.
REMOVAL OF THE CF
TM
CARD FROM BLISTER
1. Hold a corner of the blister.
2. Clap the blister on your palm for removing the plastic case.
3. Hold the blister upside do n ith about an inch of distance
bet een the blister and the table.
4. Use your finger to push the edge of the CF
TM
card.
5. CF
TM
card ill drop on the table.
Step 1 & 2 Step 3 & 4 Step 5
REMOVAL AND STORAGE OF THE CF
TM
CARD IN PLASTIC CASE
1. Hold the case ith both hands hen opening and closing.
2. Unlock and open the lid of the case.
3. Store or remove the CF
TM
card in the tray. Ensure the card
is placed properly on the tray before closing the case.
4. Lock the plastic case.
Step 2 Step 3
PRECAUTIONS FOR HANDLING AND STORAGE
• Keep out of the reach of children. Get medical advice immediately if s allo ed.
• Do not modify or disassemble the CF
TM
card.
• Do not et, heat/fire, impact, drop or bend the CF
TM
card.
• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near
fire, a stove, an air-conditioner outlet, etc.
• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause
damage through melting or the emission of heat/smoke or cause product failure.
• Do not place in cooking appliances such as micro ave ovens or high-pressure containers.
• Do not detach the label on the CF
TM
card. Do not attach other stickers/labels on the CF
TM
card.
DATA PROTECTION
• MICRODIA CompactFlash
TM
Memory Card comes pre-formatted. Make sure to back up all the data on your CF
TM
card before formatting.
• Do not remove the CF
TM
card and s itch off any equipment using the card hen data is being read, ritten and
transferred. It can cause data to be destroyed.
• Insert the CF
TM
card firmly in the correct orientation. The product ill not operate correctly if it is inserted in an
incorrect orientation or not inserted all the ay
• Parental Guidance is needed hen a child uses the CF
TM
card. Teach the child ho to use and protect the
product and insure that the child follo s your instructions.