a60ed080-2e33-4c84-8187-370b5bb9f92b / DP2.0 / 2021-04-01 2/5 MicroVet Diagnostics
Setting the language of the Tablet PC
The language of the Tablet PC can be changed by pressing the home-button on the Tablet PC
(the launcher appears), then pressing to open the settings.
Scroll down to the bottom, tap on System and select Languages & input. Tap Languages and
choose the desired language. If your language is not in the list, tap on Add a language and
select the desired language to add it to the list. Press the home-button to return to the launcher.
Note: The Micro-Cube app supports several languages. If a system language is chosen that is
not supported by the application, English will be used instead.
Setting date and time of the Tablet PC
The date and time of the Tablet PC can be changed by pressing the home-button on the Tablet
PC (the launcher appears), then pressing to open the settings. Scroll down to the bottom,
tap on System and select Date & time. Tap on Use network-provided time and select Off. Then
tap on Set date and choose the current date. Select Set time and set the current time. If
needed, uncheck Automatic time zone and select Select time zone to choose the current time
zone. Press the home-button to return to the launcher.
Setting up a Bluetooth connection
Follow the steps below to establish a Bluetooth connection:
1) To set up a Bluetooth connection, press the home-button on the Tablet PC (the launcher
appears), then pressing to open the settings.
2) Scroll down and tap on Connected devices, then on Connection preferences, followed by
tapping on Bluetooth to enter the Bluetooth settings.
3) If it is greyed out (inactive), tap on the switch on the right side of the screen.The
switch is now ON ( ) and will appear blue.
4) Tap on Pair new device to enable a list that lists all
pairable devices in the current location. Check the
serial number on the back-side of the analyser and
select the correct device from the list.
5) Another dialog appears. Press Pair to pair
instruments to the Tablet.
