Jason.L Switch System 4 Person Workstation User manual

INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
Tools Required: Power screwdriver.
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
Page 1 of 5
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Table Top x4 (1800x800mm)
Leg x6
Leg Bracket x6
Beam Bracket x10
T Beam Bracket x2
Short Beam x3 (1225mm)
Long Beam x4 (1570mm)
L-Bracket x15
1
2
3
4
5
6
7
8
Hex Nut x6
L-Bracket screws x15
Hex Head screws x26
M8x25mm Dome Head x6
9
10
11
12
COMPONENTS
SCREWS
Page 2 of 5
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
5
6
4
3
810
12
2
1
7
9
5

Page 3 of 5
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Join 2 L-Bracket through each 1570mm Beam
and 1 L-Bracket through each 1225mm Beam.
Join Leg Brackets to each Leg using screws to secure them, as follow.
Securely connect each Beam to each Beam Bracket. Screw to secure. Insert Hex Nut on each Beam Bracket.
01
03 04
02

Position as presented, and proceed to screw
to ensure each corner of the frame.
For the 2 central legs, attach as presented, using T Beam Bracket.
Page 4 of 5
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05 06

Once we get the whole frame ready, ensure the worksurface is centered
over the frame. and fully tighten all M6x40mm Hex Head to Table Tops,
through each L-Bracket.
Page 5 of 5
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
09
Once we get the whole frame ready, ensure the worksurface is
centered over the frame. If you are planning to install a divider
screen, leave a 25mm gap between tables.
25mm
07
Directly screw into table tops, using L-Bracket
screws through each L-Bracket.
08
Note: If you are planning to install Pincer Brackets
like the image to the right, you need to attach these
brackets before continuing.