MIGEL GBL 1000 User manual
1
GBL 1000
2
OFF
3
:رادشه
4
"0"
Program
Program
Pulse
Function juice
Function crush ice
MAX
"0"
•
5
•
"0"
1
GBL 1000
Dear customer!
Thanks for your worthful choice and condence to Migel brand.
We really hope that you enjoy operating this product.
English
IMPORTANT SAFEGUARDS
The following basic safety precautions apply when using electrical
appliances, read all instructions before use. And save this instruction
manual for future use.
1. This product is intended for household and indoor use only. Do not use
this product for commercial use purpose, and do not use outdoor.
2. This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
3. This product shall not be used by children. Keep this product and its cord
out of reach of children.
4. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
5. Cleaning the appliance please use the dry cloth, do not use water
cleaning the motor base, it may cause the potential injury from misuse.
6. The blade accessory is very sharp, please paid attention for handing
the sharp cutting blades during cleaning, emptying the bowl and user
maintenance.
7. Be careful if hot liquid is poured into the product as it can be ejected out
of the appliance due to a sudden steaming.
8. Do not allow operate with hot liquid.
SPECIFICATION
Input Power ................................................. 1200W
Blender Jar Capacity ................................. 1.8L
Voltage/Frequency..................................... 220-240V~50/60Hz
2
9. Always switch o the product and disconnect from supply if it is
left unattended and before assembling, disassembling, cleaning or
approaching parts that move in use.
10. Do not immerse the product or allow the supply cord and plug come
into contact with water or other liquid.
11. The use of accessory attachments, including canning jars, not
recommended by the appliance manufacturer may cause a risk of re,
electric shock or injuries to persons.
12. Do not let cord hang over edge of table or counter or touch hot surfaces.
13. Do not place on or near a hot gas or electric burner or in a heated oven.
14. Extreme caution must be used when moving an appliance containing
hot oil or other hot liquids.
15. Where applicable, always attach plug to appliance and check that the
control is OFF before plugging cord into wall outlet. To disconnect, turn
the control to OFF, then remove plug from wall outlet.
16. Do not use appliance for other than intended use.
17. Avoid contacting moving parts.
18. Keep hands and utensils out of container while blending to reduce the
risk of severe injury to persons or damage to the power blender. A scraper
may be used but must be used only when the blender is not running (does
not apply to an acceptable scraper integral with the appliance).
19. Do not use the product if the blade is curve or damage.
20. Never operate the product without any liquid in the jar or empty.
21. Never try to defeat the interlock switch mechanism, make sure the
accessory is completely installed before operation.
22. Do not overll the jar.
23. Always operate blender with cover in place.
24. CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit that is
regularly switched on and o by the utility. If the thermal cut-out operate
during using, please switch o the product and unplug the plug from the
supply main, let the product cold down before use.
3
A. Main unit
B. Control panel
C. Jar base
D. Sealing ring
E. Blade holder
F. Glass jar
G. Cover
H. Measuring lid
25. WARNING: Do not try remove the blending jar form the motor base
during operation or the blade still rotating. After use product, must let the
blade stop rotating, and then pick up the jar from motor base.
Product line graph
1. The whold product
4
Operation Instruction
1. Rotary switch knob – “0” means Power OFF; “Program” means standby
mode, you can use the program function (Pulse, Ice crush and Juice);“MIN”
to “MAX” is stepless speed control.
2. Pulse function –keep pressing the switch, the product working by
maximum speed.
3. Ice crush function & Juice function – click the button, the product will
enter the relevant mode of work, and then click the same button, the
product will stop operating.
4. The max. capacity of the jar is 1.8L, do not allow exceed the max. level
mark.
5. This blender is not allow operating empty, we suggest 2 parts of soft
fruit and 3 parts of water (soft fruit only, such as carrot, apple, etc.), and the
operating time no longer than 2 min.
Key Point Instruction
1. Blending jar – 1.8 liters capacity, glass, SUS 420 stainless steel blade, food
contact grade material.
2. Measuring lid – 85mL capacity.
3. Speed – 22000 rpm high speed, good performance assurance.
4. Noise – less than 85 dB (1 meter form the product, background noise
less than 65 dB).
5. Protection:
Safety switch – If the blending jar not in position or remove the blending
jar during working, the product will not work. You need to put the blending
2. Control panel
5
jar in position, rotate the knob to “0” position, and then start to use the
product;
Overheat protection – If the product overload working for long time, the
thermal limiter will stop the product to protect the motor not overheat. If
thermal limiter operate, please reduce the load of blending jar, and wait for
almost 30 min to let the motor cool down, and then use the product again.
If LED light still ashing, but product still not work, wait more 10 to 20 min.
Overcurrent protection – If blending very hard food (or very big food)
incorrectly, the blade may block, the current limiter will stop the product.
If current limiter operate, please switch o the product and remove the
very hard or very big food, and then use the product again.
Cleaning & Maintenance
1. Before cleaning, make sure the power switch and speed regulator is in
“0” position, remove the plug from the supply main.
2. Cleaning the blending jar can use the water, but not chemical agent or
other liquid.
3. Cleaning motor base only use the dry cloth, never use wet cloth clean
the motor base, or immerse the motor base into water.
4. If the product operating with abnormal noise, or shaking seriously.
Please stop use this product, and send back to the service agent to check
it. Never repair the product by yourself.
ENVIRONMENT FRIENDLY DISPOSAL
You can help to protect the environment!
Please remember to respect the local regulations: hand in the
non working electrical equipments to an appropriate waste
disposal center.
Storage
1. After use the product, please repack the product, and store it in a dry
place and avoid sun exposure.
2. Make sure the children could not reach the product.
3. Keep the product dry before repack.
Table of contents
Languages:
Other MIGEL Blender manuals
