1514
HD2E 13 R
ENGLISH
TECHNICAL DATA ROTARY DRILL
Noise information
Wear ear protectors!
Vibration information
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this
power tool.
Save all warnings and instructions for future reference.
DRILL SAFETY WARNINGS
Safety instructions for all operations
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fasteners may contact hidden wiring or
its own cord.
Use auxiliary handle(s), if supplied with the tool.
Safety instructions when using long drill bits
Never operate at higher speed than the maximum
speed rated of the drill bit.
Always start drilling at low speed and with the bit tip in
contact with the workpiece.
Apply pressure only in direct line with the bit and do
not apply excessive pressure.
WARNING
ENGLISH
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
WARNING!
SPECIFIED CONDITIONS OF USE
EC-DECLARATION OF CONFORMITY
GB-DECLARATION OF CONFORMITY
MAINS CONNECTION
MAINTENANCE
