Milwaukee 58-01-1270 User manual

NOTE:
ON LEADS 4 AND 5, INSERT
TERMINALS INTO BRUSH
HOLDER BEFORE ROUTING
THEM THROUGH THE WIRE
TRAPS. TUCK LEADS 3 AND
4 DOWN INTO WIRE TRAPS.
NOTE:
LEAVE NO SLACK ON
FIELD SIDE OF WIRE
TRAP.
NOTE:
All leads must be held to f l/E”.
Terminals, Connectors and 1 or 2 End Wire Preparation All field leads to be measured from
and perpendicular to laminations.
All lead lengths are before stripping.
TERMINAL DESCRIPTION
Co& Part No. Qnty.
Tl 23-74-0155 4
T2 22-44-0090 2
I I 1