Minicraft Models 11236 User manual

Model A Roadster
The Ford Model “A” was designed to replace the very successful Model “T”. Despite the fact that
the Model A was released just as the United States entered the “Great Depression” it is
considered one of the most successful automobile designs of all time.
The Ford Model “A” was one of the most versatile automobiles ever, having been produced in
many versions including roadster, coupe, 2 door sedan, 4 door sedan, pick-up, sedan delivery to
name only the most popular! The Model “A” deluxe roadster represents the pinnacle of Model A
design by combining the rugged and economical four cylinder engine in a roadster that offered top
down enjoyment and sporty good looks and seating for 4 using the unique “rumble seat”.
This Minicraft kit represents the deluxe roadster with almost all of the extra options one could add
including fender mounted spare time, rumble seat, chrome luggage external luggage rack and
retractable canvas top as produced in 1931. The model offers excellent detail in 1/16 scale, with a
flat-head 4 cylinder engine, opening doors, detailed interior, folding rumble seat, original style
spoke wheels with real rubber tires and a fully detailed chassis with pose-able steering.
Minicraft Models, 1501 Commerce Drive, Elgin IL 60123 USA
www.minicraftmodels.com
Printed in China
11236

Sprue F
8
5
6
7
4
321
13
12
28
29
27
24
25
26
21
23
22
11
10 9
15
16
17
18
20 19
14
Sprue E
4
3
6
7
8
9
10
1
2
15 14 13 12
26 25
24 23 22
21
18
19
16
17
20
11
5
Sprue B
22
1
21 18
20 19
Sprue G
5
1 2
3
4
6
7
8
9
10 11
12
15 15
14
16 17
14
1313
Sprue I
4
1 1
3
5
2
717
18
19
29
28 27
26
13 12
8
910
11
22
21
2324
25
16 15
14 3
21
4
5
6
20
Sprue H
Tires
Rivets (Front Axle) Axle
Hinge Pins
Sprue J (Chromed)
2
3
4
5
1
10
11
13
14
12 7 6 98
20
32
33
34
35
31
30
27 26
21
22
23
24
25
3839
36
37
28
29
15
16
17
18
19
Sprue C
D 1
4
5
9
2
3
1
1
8
1
2
15 5 6
34
16
7
8
9
1413
12
11 10
Sprue L
Sprue M (Chromed)
10
6
9
7 8
5
4
16
15
11
14 13 12
31 2
Sprue M (1-3)
Parts marked are not for use.
11236
4

1
Cement engine block H(1/2) together. Cement additional
parts in place to complete assembly.
5
H
29
H
9
H
24
H
29
F
6
H
28
H
13
H
1
H
27
H
26
H
2
H
14
H
12
G
3
H
18
H
6
G
7
G
8
H
10
H
23
H
11
H
9
G
15
H
8
G
16
H
4
H
12
H
3
Cement shaft H(29) and bracket H(8) to the engine. Place H(15) over
H(29) and cement. Place fan belt and pulley H(6) over shaft H(29) and
cement to engine. Cement fan F(29) to the shoulder of H(29). Cement
all other parts in place as shown to complete assembly.
Cement carburetor H(9/10/23/24) together, then cement to manifold
H(4). When dry, cement to engine. Cement exhaust manifold H(16)
and bracket H(11) to engine.
4
2
Cement transmission H(3/12/13) together, then to the engine.
2X
Cement
Coller
Kleben
Pegar
Incollare
Colar
Kleven
DO NOT Cement
Ne pas coller
Nicht Kleben
No pegar
Non collare
Nao colar
niet kleven
Optional
Choix
Auswahlmoglichkeit
Eleccion
Scelta
Opcao
Keuze
Cut away
Couper
Scheiden
Cortar
Tagliare
Cortar
Sniden
Repeat operation
RŽpŽter l'opŽration
Vorgang wiederholen
Repitir la operacion
Ripetere
Repitir a operacao
Herhalen
BEFORE BEGINNING ASSEMBLY
Your MINICRAFT model contains a wealth of highly detailed parts. Please take a moment to read
the instruction sheet to become familiar with the parts before beginning assembly.
Be sure to test the fit of all parts before gluing.
Remove the plating from the 'chromed' parts in the areas where glue will be applied.
Note and follow instruction icons shown below.
SUGGESTED PAINTING GUIDE

5
Assemble the chassis by cementing all parts indicated to E(2) except F(9/10). Cement E(1) to other parts, when dry attach F(9/10).
Note diagram showing appropriate locating holes on parts E(1/2).
6
Secure the engine to the chassis as shown. Cement at four points shown.
7
16
G
13
G
14
G
16
G
Rivet
Note alignment slot
Rivet
Finished Wheel
25
E
12
E
15
E
18
E
1
E
9
F
19
E
11
G
10
G
20
E
2
E
10
F
E(18) E(15) E(12) E(25)
Assemble five wheels by cementing part G(13) to G(14), trapping the tire between. Assemble two front wheels by placing
rivet through hub, then gently tapping the rivet into part G(16).

8
11
F
23
E
18
F
2
G
1
G
21
E
17
F
16
G
24
E
3
E
28
F
7
F
1
E
13
F
10
E
17
G
19
F
20
F
8
F
17
G
21
E
26
E
1
G
2
G
2
G
1
G
22
E
16
F
17
E
16
E
15
F
15
G
15
G
15
G
22
E
View from above
Cement parts G(1/2) to one wheel, trapping the pins of parts E(21) and E(22) in location holes.
Do not allow cement to touch pins. Allow one wheel assembly to dry, then repeat with the other wheel.
10
Cement the front wheel assembly to the chassis and position in place with part E(3). Place G(15) on each end of differential
assembly and position by cementing E(26) into the slots as shown. Cement parts E(23/24) to parts G(15) and assembled
chassis. Check alignment of all parts as cement is drying.
11
Cement muffler F(19/20) together, then to exhaust manifold. Before cement sets, slide bracket F(7) over exhaust pipe F(8) and cement exhaust pipe
to muffler and tailpipe F(13). Align and cement bracket F(7) to frame E(1). Cement E(10) to G(10) and F(28). Cement part F(28) to side of chassis.
Gently tap axle into one part G(17), slide though differential and gently tap second part G(17) to axle. Cement assembled rear wheels to parts G(17).
9
Cement the differential and drive
shaft assembly together as shown.
Cement end of part E(26) into
downward facing slots on parts
G(15).

12
1
D
1
B
19
G
18
G
13
Cement battery parts F(22/26) together and glue to frame in position shown.
Cement fenders and floorboard assembly to frame. Cement engine
assembly in position, connecting to driveshaft. Glue exhausts into position.
7
J
21
G
6
J
17
Carefully cement lenses I(2) to trim J(20),
then attach to dash C(1).
20
J
2
I
2
I
1
C
16
Cement all controls in place as shown. Slide E(5)
over F(14). Cement E(5) to dash and F(14)
into hole in floor. Cement E(4) under dash.
8
C
3
J
4
J
12
J
6
E
7
E
1
C
5
E
14
F
5
E
4
E
4
L
1
L
14
Assemble seat back L (1) to seat L (4), aligning tabs
with slots in floorboard.
15
Attach parts (26/27) as shown. Note shift knob J (26) inserts into
hole on top of transmission housing.
27
J
26
J
5
J
Cement floorboard D(1) to B (1). Cement left fender B(2)
in place. Note two versions are included, with or without a
cutout for the spare wheel. Refer to step 31.
Attach running boards G(18/19).
2
B
2
B
26
F
22
F

18
Cement dash/cowl assembly to chassis. Thread steering shaft F(12) through
part E(4) under dash and connect to steering linkage on chassis.
Cement steering wheel parts as shown and cement to steering shaft.
27
F
14
J
13
J
19
Assemble seat L (15) and L (2), then insert into body
shell L (16). Do not glue.
15
L
16
L
2
L
20
Cement sides L (7) and L (8) to body shell. Do not apply glue
to hinge points. Attach seat bottom L (3).
7
L
8
M
12
L
3
L
8
L
7
M
21
Cement body shell to assembled chassis.
22
Attach hinges M(7/8) to body. Cement top L(12) to body.
12
F

24
Cement door halves L (5,13) together. Cement hinge pin
to hinge E (9), then cement hinges E (8,9) to door.
8
E
9
E
13
L
5
L
23
Cement door halves L (6,14) together. Cement hinge pin
to hinge E (9), then cement hinges E (8,9) to door.
9
E
8
E
14
L
6
L
Shorten one end of hinge pins to dimensions shown.
Glue into position as shown.
(Part is shown upside down).
End view
1/16"
(2mm)
2X
Steps
32/33
27
Assemble radiator as shown.
Decal
28
Cement water hoses F(21/23) to engine. As cement is setting, attach radiator to chassis
and cement hoses to radiator. Position radiator by cementing tie rods E(13/14) in place.
Refer to insert drawing showing connection points on radiator. Cement parts H(25) and
G(4) to firewall.
1
F
2
J
24
F
25
F
2
F
(Back of Radiator)
E(13) E(14)
F(23)
F(21)
14
E
13
E
25
H
4
G
23
F
21
F
25
Fit (do not cement) hinges F5 to door hinges. Hold door
shut and in place with tape, then carefully cement hinges
F (5) to body.
5
F
5
F
26
Fit (do not cement) hinges F5 to door hinges. Hold door
shut and in place with tape, then carefully cement hinges
F (5) to body.
5
F
5
F

29
Hood/Engine Cover
Cement J(31) to C(5) and J(32) to C(4).
Note alignment.
4
C
5
C
31
J
32
J
Long end
Short end
Long end
Short end
30
Assemble Right and Left sides of hood as shown. Do not allow cement to
enter the holes in hinges H(21/22).
Check assembly for
freedom of movement
31
Cement J(11) to C(3) and hinges J(21) C(2/3).
Place (do not cement) J(33) and J(34) into the
hinge holes. Cement handles J(9) in place.
33
Slide (do not cement) pegs on windshield M(3) into upper holes of
parts L(10/11). Slide these parts into slots at bottom of frame M(9)
(note dashed lines). Carefully cement windshield to frame. Insert
L(9) into lower holes of parts L(10/11). Cement parts L(10/11) to
body. Attach side screens M(1/2).
34
Cement M(12/13/14) to body. Cement trim M(6) to body.
3
C
4
C
5
C
2
C
9
J
3
M
1
M
2
M
11
L
9
L
10
L
9
M
6
M
14
M
13
M
12
M
33
J
21
J
21
J
9
J
34
J
11
J
21
J
21
J
21
H
22
H
Do not allow cement into
the holes in parts J21.
NOTE
Test fit spare tire in well
and lightly sand tire
well for proper fit.
Carefully cement hinge pins on engine hood to body. When cement is dry,
check hood for freedom of movement. Cement hub cap J(30) in place
on spare tire. Place or glue optional spare tire to fender well.
32
30
J

35
Cement bumper and accessories to front end and hub caps J(30) and handles J(29) to body, left and right sides. Cement
accessories to windshield.
OPTIONAL
DECAL
DECAL
36
Cement bumper M(10) to brackets. Attach rack M(11) and step M(4) to bumper mounts. Assemble J(25/24/8) and H(19)
and cement to body.
3
I
25
J
10
M
24
J
8
J
4
M
11
M
1
J
20
H
10
J
23
J
17
J
18
J
19
J
15
M
16
M
5
M
22
J
29
J
19
H
3
I
3
G
30
J
(Both sides)
30
J
(Both sides)
(Both sides)

Your Minicraft model includes high-quality waterslide decals. These decals adhere best
to a glossy surface; and it is recommended that you apply a clear gloss coat over your
painted model.
Use a sharp scissors or knife to cut individual decals from the carrier sheet. Do not cut
into the clear film surrounding the individual decals.
* It is recommended that you apply one decal at a time.
* Place the decal section in warm water, when first inserted in the water your decal will
curl, after approximately ten seconds the decal will uncurl. Remove from water and lay
on a paper towel. After approximately 10 - 20 seconds the decal will slide freely from the
backing paper. Use a small brush to help slide the decal from the backing paper and into
position on the model. Carefully blot excess water from the decal, using care not to move
the decal or tear it.
* If you choose to use a setting solution, apply a thin coat over the decal following the
manufacturer’s instruction.
* Allow the decal to dry overnight. Wash any adhesive residue off the model with a small
amount of clean water and dry thoroughly.
* Apply clear gloss, matte or flat coat to seal decals following the instructions from the
manufacturer.
Visit our Website-
www.minicraftmodels.com
Minicraft Models
1501 Commerce Drive
Elgin, IL 60123
Phone: [phone]